ABS-DWV COUPLING HUBXHUB 3IN

PIPE NIPPLE GALV 1-1/2X72

PVC Cellcore is highly durable, with high tensile and impact strength. It is easy to install and has better sound deadening qualities than PVC Cellcore DWV foam core. Installation requires the use of primer and solvent cement. For pressure applications, sharply angled pressure fittings...

PIPE NIPPLE GALV 1-1/2X60

Oatey® saddle tee kits are designed to be solvent welded to an existing 3 or 4 in SCH 40 DWV line and secured with metal V-bolt, washers and nuts. Accepts incoming line in side the socket or joins with a SCH 40 DWV fitting...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005....

Apollo PEX tubing is cross-linked, high-density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The...

The Danco square tee valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday...

The Danco round tee valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday...

PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for...

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, MPT Connection, Brass, Chrome, 4 in L, Suitable for: Copper and Iron Pipes

PIPE NIPPLE GALV 1-1/2X48

PIPE NIPPLE GALV 1-1/2X36

PIPE NIPPLE GALV 1-1/2X30

For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. Use as pneumatic control line, water and water softener lines...

Lasco Pipe Coupling, Nominal Size: 3/4 in, Slip x Slip Connection, Schedule Rating: SCH 80, PVC, 2-1/8 in L

Lasco Pipe Coupling, Nominal Size: 1/2 in, Slip Connection, Schedule Rating: SCH 80, PVC, 1-7/8 in L

Chrome. Lead-free

PIPE NIPPLE GALV 1-1/2X24

PIPE NIPPLE GALV 1-1/2X18

JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid...

BrassCraft® 1/2 in nominal compression inlet x 3/8 in OD compression outlet multi-turn angle valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The angle valve is most often used where the water pipe enters the room from...

Anderson Metals Pipe Nipple, Nominal Size: 1 in, MPT Connection, Nylon, 1 in L, Suitable for: Plastic Tubing or Rubber Hose

Canplas Reducing Closet Bend Pipe Elbow, Nominal Size: 4 x 3 in, Hub Connection, Angle: 90 deg, PVC, White

PIPE NIPPLE GALV 1-1/4X72

BrassCraft Gas Connector, Nominal Size: 1/2 in, MIP x FIP Connection, Stainless Steel, Polymer-Coated, 36 in L, 3/8 in Dia Outside, 1/4 in Dia Inside

BOILER DRAIN 1/2MIP & SWT QTR

1/2 hp heavy-duty split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded waterproof power cord, pumps up to 80 gpm, 4800 gph, bottom intake provides for clog-resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back...

1/2 hp, 7.6 A sewage pump (93501) features cast iron, tethered, 2 in discharge, cast aluminum vortex impeller and 10 ft cord. Includes 18 in x 30 in basin, 18 in cover, check valve and snap-in plug. Basin features are structural foam construction, air...

Great pump battery back-up Kit, suitable for use With: sump Pumps, 12 VDC, tethered Switch, 10 ft Cord, 1-1/4 in discharge Size, Thermoplastic. Works with 12 V lead-acid, deep-cycle marine/RV and AGM batteries. Recommended minimum 40 ah rating. Example Orgill SKU 7151525, great pump...

Continuous-duty, thermally protected split capacitor motor, lifts water up to 25 ft vertical height, rugged stainless steel and cast iron construction, 2 in discharge for high-capacity pumping, 1-1/2 in NPT adapter included, clog-resistant thermoplastic Vortex impeller. Can be used as a utility pump by...

Superior Pump Pre-Assembled Battery Backup Kit, Outlet Connection Size: 1-1/2 in, Pump Voltage Rating: 120 V, Back-up Voltage Rating: 12 VDC, Pump Current Rating: 4.1 A, Frequency Rating: 60 Hz, 1/3 hp, Number of Phases: 1, Pump Maximum Head: 25 ft, 46 gpm, Back-up...

BALL VALVE PEX FULL PORT 3/4

Lasco Pipe Elbow, Nominal Size: 1/2 in, Slip Connection, Angle: 90 deg, Schedule Rating: SCH 80, PVC

Harvey™ pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. Fast-acting cleaner removes surface dirt, grease and grime Apply sparingly to ABS pipe and fittings

Lasco Pipe Nipple, Nominal Size: 1/2 in, Schedule Rating: SCH 80, PVC, 48 in L

PIPE NIPPLE GALV 1-1/4X60

The ProSource pipe elbow connects cast iron, copper, plastic or steel pipe and it's extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. 1-1/2...

Fluidmaster water supply connectors are built to last. Made of a tough core covered with braided stainless steel wire, these connectors exceed code requirements for durability. They also have a large inside diameter for higher flow capacity. Exceptional flexibility for fast, easy installation Won't...

Elkhart Products Pipe Elbow, Nominal Size: 1 in, Sweat Connection, Angle: 90 deg, Copper

Flexible tees and elbows allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they are exceptionally flexible and long, they are the ideal replacement for fittings at the...

For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. Use as pneumatic control line, water and water softener lines...

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Plastic male stem fitting for point of use low-pressure applications. It is designed and manufactured for many years of trouble-free service. Produced of off-white polypropylene, a high-performance thermoplastic material, the design allows for quick and easy connections without the use of installation tools.

Plastic female stem fitting is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble-free service. Produced of off-white Polysulfone, a high-performance thermal plastic material, the design allows for quick and easy connections without the use of...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using...

Flexible tees and elbows allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they are exceptionally flexible and long, they are the ideal replacement for fittings at the...

Flexible tees and elbows allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they are exceptionally flexible and long, they are the ideal replacement for fittings at the...

PIPE WRAP FOIL 1/8X2X30

Canplas Downspout Adapter, 2 x 3 in Connection, Hub Connection, PVC, White