Canplas 2-Way Cleanout Pipe Tee, Nominal Size: 4 in, Hub Connection, PVC, White

PIPE NIPPLE GALV 1-1/4X48

1 in insert rope adapter. Lead free

Flexible tees and elbows allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they are exceptionally flexible and long, they are the ideal replacement for fittings at the...

Simmons Adapter, Nominal Size: 1 in, Male Insert Connection, Red Brass Certified lead-free

PIPE NIPPLE GALV 1-1/4X36

Pro-Flex Accessory Pack, Specifications: 3/8 in Dia CSST, Silicone Rubber/Stainless Steel, Suitable for: Pro-Flex CSST Flexible Gas Piping System, Includes: (4) Retainer Rings, (2) Slide Rings, Silicone O-Rings and High Temperature Sealing Gaskets

Charlotte Pipe, Type 1, Plain End, Solid Wall, Nominal Size: 1 in, 20 ft L, 630 psi, Schedule Rating: SCH 80, PVC, Gray

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.

Mueller Copper Tubing, Type L, 3/4 in Nominal, 2 ft Length, Copper

PEX TUBE 3/4IDX7/8ODX100 FLEX

The Richmond® Essential® 2.5-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 1440 W element and a...

ELBOW 90DEG SWVL 3/8P X1/2FPT

Contains one can of PVC Cement and one can of NSF purple primer. Designed for use with PVC pipe and fittings Primer pre-softens pipe and fitting surfaces Solvent cement bonds pipe and fittings

Contains one can of regular clear PVC cement and one can of NSF purple primer. Ideal size for most pipe installations. Convenient handy pack for storing pipe and fittings

use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.

ABS ELBOW 90DEG HUBXHUB 3IN

Barb x male pipe. One-piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed...

A simple and effective way to insulate pipes of all diameters. Easy to use tape will Insulate pipes in exposed areas and it prevents pipes from sweating. Also ideal for over-wrapping the electric heat cable kits used to prevent water pipe freezing.

DRAIN UNIV OFFSET ADAPTER 3X4

1/2 in FIP x 1/2 in MIP reversible bypass with 3/4 in hose connection on side. 3/4 in male hose thread bottom bypass

The SharkBite® push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available...

PIPE NIPPLE GALV 1-1/4X30

ABS ELBOW 60DEG HUBXHUB 1-1/2

PIPE NIPPLE GALV 1-1/4X24

use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.

PIPE NIPPLE GALV 1-1/4X18

Closed cell poly foam with two glue strips. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. ADD THERMAL R-VALUE TO REDUCE HEAT LOSS INHIBIT PIPE CONDENSATION NOISE INSULATOR 25/50 FLAME/SMOKE

ProSource Pipe Nipple, Nominal Size: 1 in, Welded Connection, Schedule Rating: SCH 40, Carbon Steel, 72 in L

Features a full-size 9/16 in band and housing width that allows 12-1/2% more sealing area over conventional 1/2 in bands. One-piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to...

4 in PVC pipe base general-purpose cleanout with 6 in nickel cover and round ring. Oatey adjustable drain cleanouts easily convert a drain to a cleanout or vice versa, even after the concrete is poured

BALL VALVE PEX FULL PORT 1IN

ABS FEMALE ADAPTER 1-1/2IN

Quick R Pipe Insulation, 5/8 in ID x 1-5/8 in OD Diameter, 46 in Length, 1/2 in Thickness, Poly, Charcoal, 1/2 in Pipe, Closure: two self-seal strips

Closed cell poly foam with two glue strips. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Closure: two self-seal strips. ADD THERMAL R-VALUE TO REDUCE HEAT LOSS INHIBIT PIPE CONDENSATION NOISE INSULATOR 25/50...

ABS MALE ADAPTER 2IN

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA...

Lasco Pipe Nipple, Nominal Size: 3/4 in, Schedule Rating: SCH 80, PVC, 18 in L

B & K Pipe Nipple, Nominal Size: 4 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 8 in L

Key for loose key stops. Tamperproof.

JM Eagle Pipe, Plain End, Nominal Size: 3 in, 3-1/2 in Dia Outside, Wall Thickness: 0.216 in, 20 ft L, DWV, Solvent Weld Connection, 260 psi, Schedule Rating: SCH 40, ABS, Black Structurally sound joints provide a rigid connection Unaffected by corrosive elements sewer...

Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used for sprinkler systems where...

Lasco Pipe Tee, Nominal Size: 1-1/2 in, Slip Connection, Schedule Rating: SCH 80, PVC

IPEX vinyl process piping systems a complete line of pipe, fittings, flanges, strainers and valves to meet all your process system requirements. IPEX developed the Xirtec®140 (PVC) and Corzan® (CPVC) systems to meet industry demands for a complete pipe, Valves and Fittings (PVF) package...

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp Type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed edges provide positive connection Excellent vibration...

BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be...

PLUB ABS MPT 1-1/2 IN

With thread protection on all pipe thread.

Anderson Metals Pipe Plug, Nominal Size: 1/2 in, MPT Connection, Head Type: Cored Square, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Waterproof impregnated lower valve for regular service.