VALVE PRS RLF W/TEST LVR 1/2IN

VALVE HT-WTR TMP CTRL LF 3/4IN

CONNECTOR FEMALE 3/4CTS X 1FPT

PRESS RLF VALVE MNPTXFNPT 1/2

PRESS RLF VALVE MNPTXFNPT 1/2

1/2FIPX3/4 GARDEN HSE VALVE

This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water...

Specially made for smaller supply lines and ideally suited for laboratory equipment, processing tanks, sterilizers, dairy equipment and similar applications. It is particularly recommended for boiler feed lines to prevent backflow when supply pressure falls below system pressure. Suitable for use on hot or...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a forged body with NPT male inlet and NPT female outlet connections,...

Designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to...

Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from...

This 3/8 in OD x 1/4 in MNPT AquaLock™ mini male adapter works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique...

Used to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features a bronze body with MNPT inlet and FNPT outlet connections, unique thermostat with special thermo-bonded coating and a test lever. Model...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with MNPT inlet and FNPT outlet connections, unique thermostat with...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique...

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with MNPT inlet and FNPT outlet connections, unique thermostat with...

This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water...

Designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 Btu/hr. This two in one relief valve provides the most proven and cost effective means to protect against excessive temperature and pressure emergency conditions....

Watts Pressure Relief Valve, 3/4 in Nominal, FIPS Connection, Setting Pressure: 30 psi, 30 to 150 psi Operating, Media: Water, Iron Body, Stainless Steel Spring, Dimensions: 2-1/2 in L x 3-1/2 in H, 180 deg F, Suitable for: Hot Water Boilers

Watts Pressure Relief Valve, 3/4 in Nominal, FIP Connection, 30 to 150 psi Operating, Media: Water, Iron Body, Stainless Steel Spring, Dimensions: 2-1/2 in L x 3-1/2 in H, 180 deg F, Suitable for: Hot Water Boilers

This 3/4 in lead-free hot water control valve is designed for installation on water heating equipment to provide tempered water to point-of-use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response...

Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from...

This 3/4 by 3/4 in lead-free dual check valve prevents the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. The valve consists of a lead-free brass body construction, with two plastic replaceable...

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

This 1/2 in CTS x 1/2 in NPT AquaLock™ plastic male adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 1/2 in CTS x 3/4 in NPT AquaLock™ plastic male adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 1/2 in CTS x 3/4 in NPS AquaLock™ plastic female adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 1/2 in CTS x 3/4 in Closet AquaLock™ plastic female adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 3/4 in CTS x 3/4 in NPS AquaLock™ plastic female adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 1 in CTS x 1 in NPS AquaLock™ plastic female adapter works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 1/2 in CTS x 3/8 in CTS AquaLock™ plastic reducing stem works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

This 3/4 in CTS x 1/2 in CTS AquaLock™ plastic reducing stem works with copper, CPVC, PEX and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications....

works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Watts Tube Union Coupling, Nominal Size: 1 in, Plastic Watts® quick-connect products are the easiest method on the market for joining copper, CPVC and PEX (LDPE, MDPE, HDPE) tubing Ideal for DIY pipe repair Rated for 250 psi at 75 deg F and 100...

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/8 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of...

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of...

This 1 in CTS quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and...

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use...

This quick-connect stackable elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 3/4 in CTS fitting rotates fully under pressure, connects to multiple materials without the use...

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools. Quick-connect fitting with integral collet and...

This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/8 in NPT fitting rotates fully under pressure, connects to multiple...