PRO-FLEX ACCESSORY PACK 1/2IN

PRO-FLEX ACCESSORY PACK 3/4IN

PRO-FLEX BONDING CLAMP 3/8-1/2

PRO-FLEX BOND CLAMP3/4-1-1/4

CSST HOSE COIL 1/2INX225FT

CSST HOSE COIL 1/2INX25FT

CSST HOSE COIL 1/2INX75FT

CSST HOSE COIL 3/4INX225

CSST HOSE COIL 3/4INX75FT

PRO-FLEX BRASS FEM FITTING 1/2

PRO-FLEX BRASS FEM FITTING 3/4

PRO-FLEX INSTALLATION GUIDE

PRO-FLEX BRASS MALE FITTING1/2

PRO-FLEX MANIFOLD 1/2

PRO-FLEX MANIFOLD 3/4X1/2/3/4

PRO-FLEX GAS APPLIANCE KIT

PRO-FLEX STRIKER PLATE 3X7IN

PRO-FLEX TERMINATION PLATE 1/2

UNION CSST PROFLEX 1/2IN

UNION CSST PROFLEX 3/4IN

Pro-Flex Floppy-Flex Protective Conduit, Trade Size: 1-1/4 in, Aluminum, Galvanized, 12 in L, Operating Temperature: 32 to 200 deg F, Suitable for: 3/4 in CCST Tubing Protective device to prevent puncture of gas line where CSST is ran horizontally or constricted at a termination...

Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005....

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Yellow handle. 1/2 psi maximum working pressure.

Pro-Flex Gas Valve, 1/2 in Connection, FIP x Flare Connection, 5 psi, Actuator Type: Lever, Body Material: Brass

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Used to attach CSST to both the beginning and end of a run At least two fittings needed per installation No special tools or sealant required Patented...

Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.