CIRCUIT BRKR BQ 4P 2-20A/2-30A

CIRCUIT BRKR BQ 4P 2-30A/2-50A

LOADCNTR MAIN BRKR 30SPS 200A

CIRCUIT BRKR ARC FAULT CH 20A

Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.

Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.

Non-circuit limiting, less rejection tabs. 120 volt AC, 10,000 AIC. 1 space per pole.

CIRCUIT BREAKER 1P 1IN 20A CL

CIRCUIT BREAKR CL 2P 1IN 2/30A

Single phase, 2 pole, 2 wire, 240 VAC. Rated 3 hp at 120 V, 10 hp at 240 V. For top and bottom entry and exit, with provision for type H conduit hub. Heavy-duty, high strength, rugged polymer enclosure with UV-resistant features. Swing-up cover...

Single phase, 2 pole, 2 wire, 240 VAC, non-metallic enclosure. Rated 1-1/2 hp at 120 V, 3 hp at 240 V with time delay fuses (uses class H cartridge fuses, not included). For top and bottom entry and exit, with provision for type H...

Cutler-Hammer Type A Hub Closure Plate, Aluminum, NEMA 3R Enclosure For use to cover a meter socket hub for a watertight seal Suitable for outdoor use Intended for field installation

Cutler-Hammer Type A Hub Closure Plate, 1-1/2 in Nominal, Aluminum, NEMA 3R Enclosure Small hub closure plate Field installed

Cutler-Hammer Type A Hub Closure Plate, NEMA 3R Enclosure, Includes: (4) Screws

Switching duty rating, duplex type breaker requires 1 in per breaker. Thermal magnetic 40 deg C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace Bryant, Challenger and Westinghouse. Type BR 120/240...

Switching duty rating, duplex type breaker requires 1 in per breaker. Thermal magnetic 40 deg C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace Bryant, Challenger and Westinghouse. Type BR 120/240...

Switching duty rating, duplex type breaker requires 1 in per breaker. Thermal magnetic 40 deg C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace Bryant, Challenger and Westinghouse. Type BR 120/240...

For use in single and 3-phase Type BR load centers 150 A and up. Requires two 1 in pole spaces on left side and two 1 in pole spaces on right side. No BJHDS hold down kit, necessary for using as a main or...

CTL Quadplex breaker with rejection tab, 2-pole outer independent trip and 2-pole center independent trip. Requires two 1 in spaces, Wire size range #14-4, 120/240 VAC.9 lb weight, 3 in x 2 in x 3 in. UL listed, Meets UL 489. Listing for HACR...

CTL Quadplex breaker with rejection tab, 2-pole outer independent trip and 2-pole center independent trip. Requires two 1 in spaces, Wire size range #14-4, 120/240 VAC.9 lb weight, 3 in x 2 in x 3 in. UL listed, Meets UL 489. Listing for HACR...

CTL Quadplex breaker with rejection tab, 2-pole outer independent trip and 2-pole center independent trip. Requires two 1 in spaces, Wire size range #14-4, 120/240 VAC.9 lb weight, 3 in x 2 in x 3 in. UL listed, Meets UL 489. Listing for HACR...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...