Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing.

Anderson Metals Pipe Coupling, Nominal Size: 1-1/2 in, FIPT Connection, Brass

PIPE STEEL BLACK 1-1/4IN X10FT

Simmons Yard Hydrant Repair Kit, Brass/Stainless Steel, Suitable for: Old 900 Series Yard Hydrant, with rounded handle, Includes: (2) Brass Lines, (2) O-Rings, Brass Connector, Brass Packing Nut, Plunger, Stainless Steel Lot Nut, Fulcrum Bolt, Square Head Set Screw

Canplas Sanitary Pipe Tee, Nominal Size: 1-1/2 in, Spigot x Hub Connection, ABS, Black

Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for...

DrainTech Square Riser, Polyethylene, Dimensions: 9.5 in L x 9.5 in W x 7.2 in H Made of highest quality structural foam polyethylene with UV inhibitor 5/16 in Grate opening Not for use in areas subject to vehicular traffic

0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Non-flammable tape is made of virgin white...

Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 1/2 in, Inlet Connection Type: 1/2 in, Outlet Connection Type: FNPT With 4-1/2 in rises for lines to four appliances 1/2 in input/output with four 1/2 in ports Manifold supplies multiple gas applications in parallel...

one-piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed edges provide positive connection...

BOILER DRAIN 1/2 CPVC SLIP

One-piece construction. Use with brass or steel pipe. All pipe threads are "American standard taper pipe threads." fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight....

Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides...

Canplas Pipe Elbow, Nominal Size: 3 in, Hub Connection, Angle: 22.5 deg, ABS, Black

Smith-Cooper 84NI4 Pipe Nipple, Nominal Size: 3 in, Butt Weld Connection, Schedule Rating: SCH 40, Carbon Steel, 3 in L, Includes: (24) Pipe Nipples

Quick R Pipe Insulation, 5/8 in ID x 1-5/8 in OD Diameter, 6 ft Length, 1/2 in Thickness, Polyolefin, Charcoal, Closure: two self-seal strips

UPC individually bagged.

Anderson Metals Tube Elbow, Nominal Size: 5/8 x 3/4 in, Flare x Male Connection, Angle: 90 deg, 650 psi, Operating Temperature: -65 to 250 deg F, Brass

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp Type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed edges provide positive connection Excellent vibration...

The Danco round broach valve handle replaces a lost or stripped handle and improves the operation of the valve. It is designed for use on hose Bibb faucets, sillcocks, stopcocks and valves. It features a metal construction that will endure the rigors of everyday...

Anderson Metals Pipe Nipple, Nominal Size: 3/4 in, MPT Connection, 1000 psi, Brass

The Elkay EZH2O® bottle filling station delivers a clean quick water bottle fill and enhances sustainability by minimizing our dependency on disposable plastic bottles. Complete cooler and bottle filling station in a consolidated space saving ADA compliant design. Integrated look combines our Green Ticker™...

COPPER REFRIG SHORTCLS 1/4X20

Lead-free reducing tee connects to copper, CPVC and PEX tubing with easy push connect technology. Backed by a 75 years warranty. Our lead-free reducing tees are ideal for manufacturing, municipal, residential and commercial applications.

Anderson Metals Pipe Connector, Nominal Size: 1/2 in Flared x 3/8 in FPT, 750 psi, Operating Temperature: 73 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Steel Tubing

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Quick R Pipe Insulation, 1-1/8 in ID x 1-7/8 in OD Diameter, 6 ft Length, 3/8 in Thickness, Polyolefin, Charcoal, closure: two self-seal strips

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.

Richmond Encore, L Condensing Combo Boiler, Super High-Efficiency, Gas Type: Natural Gas, Gas Inlet Size: 3/4 in, BTU Rating: 199,000 Btu/hr, Hot Water Temperature: 105 to 149 deg F, Maximum Water Pressure: 150 psi, Water Flow Rate: 7 gpm, Water Connection Size: 3/4 in,...

Plastic lined nipples are used for the hot and cold water connections of the water heater. The integral heat traps prevent conductive heat loss between the heated water in the water heater and the connected piping.

Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.

Richmond Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Setting Pressure: 150 psi, Dimensions: 7-1/4 in L, Temperature Rating: 210 deg F, Suitable for: Water Heater Temperature and pressure relief valves are emergency safety limit devices that will prevent or relieve...

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 240 V, Wattage Rating: 4500 W, Stainless Steel

This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring...

Canplas Reduced Coupling, Nominal Size: 3 x 2 in, Hub Connection, ABS, Black

Electric water heater tune-up kits provide a quick and easy way to replace the most common items on the most popular water heaters.

Richmond Encore L Condensing Combi Boilers, Super High-Efficiency, Gas Type: Natural Gas, Gas Inlet Size: 3/4 in, BTU Rating: 125,000 Btu/hr, Hot Water Temperature: 149 deg F, Maximum Water Pressure: 150 psi, Water Flow Rate: 4 gpm, Water Connection Size: 3/4 in, Operating Temperature:...

Richmond Electric Water Heater Element, 1 in Connection, Screw-in Connection, 120 V, Wattage Rating: 1500 W, Copper Screw-in elements with 1 in NPSM threads fit most water heaters which use screw-in type elements High quality corrosion protection Elements designated "R-Tech" feature a patented registered...

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

Richmond Electric Water Heater Installation Kit, Specifications: 3/4 x 15 in Connectors

Richmond Electric Thermostat, Temperature Setting Range: 90 to 150 deg F, Metal/Plastic, 1 in W, 2-1/2 in H, Suitable for: Residential Electric Water Heater

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.

John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe For use as a stiffener when connecting John Guest fittings with PEX or other flexible/non rigid pipe For use...

Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.