Anderson Metals Pipe Plug, Nominal Size: 3/8 in, MPT Connection, Head Type: Square, 1000 psi, Operating Temperature: 250 deg F, Brass, Yellow

A simple, one-step way to insulate both hot and cold pipes. On hot pipes, Frost King foam and foil pipe insulation helps stop wasteful heat loss, on cold pipes it can stop sweaty pipes which can cause mold. Also great for dampening sounds and...

Protect your faucets from freezing wind and chill. Made of hard plastic or foam, The Frost King faucet protectors can provide insulation for outdoor faucets throughout the winter. Plus all year long, they keep the outside air from leaking into your home.

Watts Stop Valve, 1/4 x 3/8 x 3/8 in Connection, Compression Connection, Number of Ports/Ways: 3, Body Material: Plastic

Anderson Metals Pipe Nipple, Nominal Size: 1/4 in, NPT Connection, 870 psi, Operating Temperature: 200 deg F, Brass, 1-1/2 in L, Suitable for: Brass, Copper and Iron Pipes

Anderson Metals Street Pipe Elbow, Nominal Size: 3/4 in, FIP x MIP Connection, Angle: 45 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass Pipe

Oatey® I2K Icemaker Box is designed for commercial or residential applications that require supply valves recessed into the wall. Its low lead valves can be installed both left handed and right handed. Preloaded nails Right or left hand installation Provides quick, safe water supply...

Sea Tech® 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect...

Elkhart Products Tube Cap, Nominal Size: 1-1/4 in, Sweat Connection, Wrot Copper, 1-3/8 in Dia

Rectorseal no 5® pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is...

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID.

Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters

Keeney Discharge Hose, Rubber, Black, 6 ft L

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Anderson Metals Tube Elbow, Nominal Size: 1/2 x 3/4 in, Flare x Male Connection, Angle: 90 deg, 750 psi, Operating Temperature: -65 to 250 deg F, Brass

The ProSource hose clamps are Multi- purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing and a...

Oatey® Quiet Pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves. It protects plumbing appliances and fixtures from the effects of water hammer. Installs easily to your washing machine supply valve and connects to your washing machine...

Nibco Pipe Coupling with Stop, Nominal Size: 1/2 in, Sweat Connection

A threaded bushings threads into an FPT fitting and connects to a smaller size MPT fitting.

Canplas Trap Pipe Adapter, Nominal Size: 1-1/2 x 1-1/4 in, Spigot x FNPT Connection, Schedule Rating: SCH 40, ABS, Black

Genova 700 Double Pipe Elbow, Nominal Size: 2 in, Hub Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC Ideal for "back-to-back" sink or lavatory installations

Canplas Street Pipe Elbow, Nominal Size: 2 in, Spigot x Hub Connection, Angle: 22.5 deg, PVC, White

SAW HAND PVC/ABS 18IN

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.

Lasco Reducing Bushing, Nominal Size: 3/4 x 1/2 in, Spigot x Female Connection, Schedule Rating: SCH 80, PVC, 1-1/16 in L

Eastman Ice Maker Outlet Box, Specifications: 120 psi, Quarter Turn Valve, 6 in W x 3-3/8 in D x 6 in H Box Size, 8-1/4 in W x 7-5/16 in H Faceplate Size , Center Drain, 1/2 in Inlet Sweat x 1/4 in Compression,...

4 in submersible deep well pump. Powered by a 3-wire, 230 V industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides...

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, MPT Connection, Brass, Chrome, 2 in L, Suitable for: Copper and Iron Pipes

Anderson Metals Solid Pipe Plug, Nominal Size: 1/8 in, IPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Our 3000 triple-wall HDPE pipe is triple-bonded polyethylene for exceptional pipe stiffness. With smooth inner and outer walls and a corrugated structural core, our 3000 triple-wall HDPE pipe is designed to have excellent pipe stiffness to that of PVC sewer and drain pipe.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology....

Canplas Reducing Sanitary Pipe Tee, Nominal Size: 4 x 3 in, Hub Connection, ABS, Black

three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy-to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.

CARTRIDGE PULLER FOR MOEN

Pro-Flex CSST Adapter, Nominal Size: 3/4 in, Operating Temperature: -20 to 200 deg F, Brass

Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing ideally good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastomeric PVC. Premium Series 300 stainless steel bands included....

Anderson Metals Pipe Tee, Nominal Size: 3/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing

For use with non-potable water. Pipe diameters are the same as iron pipe Solvent weld joints Pressure pipe and fittings are for use in the distribution of pressurized fluids only, which are chemically compatible with the piping materials SCH 40 PVC pipe 1-1/2 in...

Canplas Pipe Adapter, Nominal Size: 1-1/2 in, MNPT x Hub Connection, Schedule Rating: SCH 40, ABS, Black

Anderson Metals Splicer, Nominal Size: 1/2 in, Barb Connection, 150 psi, Temperature Rating: 120 deg F, Nylon

Includes vacuum breaker cap, underbody, O-ring and plunger. Air vent assembly for Arrowhead frost-free hydrants, 420 and 455BFP Series.

This is the ideal addition to take with you to repair small engines, metal furnishings, auto-motive or anything mechanical that comes your way. Made of steel The bolt/screw size is 6.3 mm The finish is made of zinc plating

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Alternative to copper plumbing pipe because of the lower cost,...

Anderson Metals Pipe Union, Nominal Size: 7/8 in, Compression Connection, 75 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing

Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP. Nickel plated brass nuts Nitrile rubber sealing washer

Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection. Connects cast iron, plastic, copper, steel or lead pipes to cast iron, plastic, copper,...

Boshart Combination and Reducing Pipe Elbow, Nominal Size: 1 x 3/4 in, Insert x FPT Connection, Angle: 90 deg, PVC, Black

Single jacket 300 test, double jacket 400 test, aluminum rocker lug expansion ring couplings.

One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp Type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed edges provide positive...