Carlon Terminal Adapter, 2-1/2 in Trade, Male Connection, PVC, Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

Carlon Standard Coupling, 2-1/2 in Trade, PVC, Gray, 3-3/16 in Length, 2.688 in ID x 3.3125 in OD Diameter, Includes: (7) Standard Couplings

JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.

JM Eagle's SCH 40 and SCH 80 PVC rigid non-metallic conduit is designed and produced for use in both aboveground and underground installations.

Interchangeable, will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 V. 10 kAIC, 10,000 AIR. 2 spaces, 2 in per breaker. All BR circuit breakers have rejection tab feature Units feature a quick-make, quick-break switch mechanism combined with inverse time element tripping operation and...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant.

Switching duty rating. Thermal magnetic 40 deg C. Interchangeable, will replace Bryant, Westinghouse and Challenger. Type BR. 120/240 V, 10,000 AIR. 1 in per pole. All BR circuit breakers have rejection tab feature Units feature a quick-make, quick-break switch mechanism combined with inverse time...

Switching duty rating. Thermal magnetic 40 deg C. Interchangeable, will replace Bryant, Westinghouse and Challenger. Type BR. 120/240 V, 10,000 AIR. 1 in per pole. All BR circuit breakers have rejection tab feature Units feature a quick-make, quick-break switch mechanism combined with inverse time...

CIRCUIT BREAKER 1P 1IN 20A BR

CIRCUIT BREAKER 1P 1IN 30A BR

CIRCUIT BREAKER 1P 1IN 15A BR

Plastic (snap-in) for type BR 1 in space. May also be used with 400 and 600 A load centers.

Eaton Ground Bar Kit, Number of Terminals: 14, Wire Size: 14 to 4 AWG, 5.69 in L

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Single pole side wire switch. Grounding terminal screw standard. 15 A, 120/277 V rating. 0.050 in THK steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out-ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Single meter socket, lever bypass, five terminals, 200 A, 600 VAC, OH/UG service. Connections line number 6 to 350 kcmil, load number 6 to 350 kcmil, 3-5/16 hub opening.

For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Quick, easy stud mounting and a...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

BOX OUTLET PVC 1G OLD ERS 20CU

Virtually unbreakable, with high-structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High-gloss finish is soil resistant. Mid-size 4-7/8 in x 4-15/16 in. Polycarbonate power outlet polycarbonate wallplates are virtually unbreakable, with high-structural rigidity,...

GB's GreenGard grounding wire connectors are specifically designed for making positive ground connections and feature the same live action as GB's WingGard™ connections with the added plating protection for corrosion resistance in grounding applications. Green in color and features a hole at the top...

Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long...

Eaton BR Load Center, 120/240 V, 125 A, Number of Phases: 1, Number of Spaces: 4, Number of Poles: 8, Number of Circuits: 8, Breaker/Load Center Type: Main Lug, Interrupt Rating: 10 kAIC, Cable Size: 14 AWG, Wiring Configuration: 3-Wire, Bus Bar Material: Aluminum,...

Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat. Flame-retardant LEXAN® insulated throat Rain, oil and dust tight Oversize locknut assures vibration-proof installation...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Eaton Load Center, 120/240 V, 125 A, Number of Phases: 1, Number of Spaces: 4, Number of Poles: 8, Number of Circuits: 8, Breaker/Load Center Type: Main Lug, Interrupt Rating: 10 kAIC, Cable Size: 14 to 1/0 AWG, Bus Bar Material: Aluminum, Enclosure Type:...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Eaton Load Center, 120/240 V, 125 A, Number of Phases: 1, Number of Spaces: 4, Number of Poles: 8, Number of Circuits: 8, Breaker/Load Center Type: Main Lug, Interrupt Rating: 10 kA, Cable Size: 14 to 1/0 AWG, Wiring Configuration: 3-Wire, Bus Bar Material:...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 no 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Push-in style with captive locking wedge. Rigid PVC. Excellent strain relief and insulation. In a dry location, use to secure #14 to #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 to #10/3. Fits 1/2 in knockouts....

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified....

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.

Indoor or outdoor applications. To support EMT conduit.

To connect EMT conduit together to allow for 90 deg bends. UL listed. Use to connect EMT conduit together to allow for 90 deg bends

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.