Made from stamped steel, this stylish wallplate adds simple elegance to your decor. Decorating with wallplates is an economical way to make great impact in your home.

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

3M™ cable stackers organize cable runs and aid in identification, putting an end to tangled wires and the potential heating that could occur when cables are held together tightly under a single fastener. Easy installation simplifies compliance with the spacing requirements of the National...

Hides and organizes loose cords and wire.

Hides and organizes loose cords and wire.

Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4 in x 4-7/8 x 1-3/8 in D.

Used to make a 90 deg inside turn around a corner, from wall-to-wall or wall-to-ceiling.

Metal raceway. For transitioning from metal raceway to 1/2 in conduit or from any steel box with 1/2 in knockout.

Used to make a 90 deg outside turn around a corner.

Use to provide easy access to connections.

Hides and organizes loose cords and wire.

Metal surface mount, for wall or ceiling use. 5 ft L x 3/4 in H x 17/32 in W. Use to protect cords. Carries wire from starter box to downstream outlet boxes, switches and fixtures

Used to make a 90 deg right or left turn on a flat surface.

Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. ITE/SIEMENS. 120 VAC, 10,000 AIC. Mechanically compatible with load centers from American Switch, Arrow-Hart, Bryant, Challenger, Cutler-Hammer, Electricenter, Frank Adams, GTE Sylvania, General Switch, General Electric,...

For Pushmatic load centers. SWD Rated. 120 VAC, 10,000 AIC. 1-1/2 in space per breaker.

Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. Twin pole, one space per breaker. Mechanically compatible with load centers from American Switch, Arrow-Hart, Bryant, Challenger, Cutler-Hammer, Electricenter, Frank Adams, GTE Sylvania, General Switch, General...

For Pushmatic load centers. SWD Rated. 120 VAC, 10,000 AIC. 1-1/2 in space per breaker.

Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. Twin single pole, one space per breaker. Mechanically compatible with load centers from American Switch, Arrow-Hart, Bryant, Challenger, Cutler-Hammer, Electricenter, Frank Adams, GTE Sylvania, General Switch,...

For Federal Pacific Load Centers. HACR rated. 120/240 VAC, 10,000 AIC.

Rotary dimmers provide a smooth rotation and full range dimming for incandescent lighting. In addition, one fully variable and quiet three-speed fan speed controls are included in the product series. Integrated rotary dial for On/Off and DIM/BRIGHT operation Preset feature allows user to return...

Turn the dial to the desired running time and the connected light or appliance will shut-off at the set time. Replaces a standard light switch and fits a standard decorator switchplate. Compatible with compact fluorescent bulbs.

Inner conductors are type THHN, rated 90 deg C, 600 V. Solid strands. Outer jacket is PVC, rated at 75 deg C. Amp rating of the product is limited to that for 60 deg C rated conductors per the National Electric Code Article 336....

Inner conductors are type THHN, rated 90 deg C, 600 V. Solid strands. Outer jacket is PVC, rated at 75 deg C. Amp rating of the product is limited to that for 60 deg C rated conductors per the National Electric Code Article 336....

3M Scotch® Premium vinyl electrical tapes offer the highest quality available in the industry. Long-lasting with superior adhesion and handling in all weather conditions, these electrical tapes will make your job easier and will lower your maintenance costs. The Scotch® 35 vinyl electrical tapes...

Scotch® 35 Yellow vinyl electrical tapes offer premium-grade quality and superior adhesion ideal for projects requiring color coding. 3M™ Scotch® 35 colored vinyl electrical tapes are highly flexible, stretchy and conformable to virtually any shape requiring color coded insulation. 3M™ Scotch® 35 yellow vinyl...

Scotch™ 35 Green vinyl electrical tapes offer premium-grade quality and Great adhesion ideal for projects requiring color coding. 3M™ Scotch™ 35 colored vinyl electrical tapes are highly flexible, stretchy and conformable to virtually any shape requiring color coded insulation. 7 mil electrical tape Abrasion...

3M™ Scotch™ Premium vinyl electrical tapes offer the highest quality available in the industry. Long-lasting with Great adhesion and handling in all-weather conditions, these electrical tapes will make your job easier and will lower your maintenance costs. The Scotch™ 35 vinyl electrical tapes come...

Scotch™ 35 blue vinyl electrical tapes offer premium-grade quality and Great adhesion ideal for projects requiring color coding. 3M™ Scotch™ 35 colored vinyl electrical tapes are highly flexible, stretchy and conformable to virtually any shape requiring color coded insulation. UL LISTED, 3M™ Scotch™ 35...

Insulates and protects against abrasion, weather, water, solvent splashes and chemicals. Stretchy, vinyl plastic. Applications include home, marine, auto, trailers and tools. Flame retardant. Pack of 5 colors.

For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. Size: 3/16 x 11 in 50 lb tensile strength Bundle diameter: 0.276 in Min, 2.76 in Max Operating temperature: -40 to 185 deg F UV resistant 100 pieces per bag

For wire tying, bundling and other fastening uses. Meets flammability classification UL94V-2. Size: 1/8 x 8 in 40 lb tensile strength Bundle diameter: 0.157 in Min, 1.97 in Max Operating temperature: -40 to 185 deg F UV resistant 25 pieces per bag

Clean, smooth metal interior for easy wire pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and...

Southwire Conduit, Flexible, Liquidtight, Trade Size: 3/4 in, Steel, Galvanized, 100 ft L

Clean, smooth metal interior for easy wire pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and...

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone....

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone....

Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16 to 24 in. 4 in Dia x 2-7/16 in D. Speed clamps, 50 lb. fixture rated. 2 hrs wall and ceiling fire rated, UL listed. Machine tapped fixture holes Rigid...

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone....

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Zinc die-cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy-access to wiring. UL listed. Bulk packed. Use as a wire pulling elbow...

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Alflex™ Type RWA is manufactured with a lightweight, high-strength aluminum alloy. Metal strip is helically formed into continuously interlocked flexible metal conduit that can withstand impact and crushing forces. Provides mechanical protection for conductors and cable 66% lighter than steel Cuts 80% faster than...

To connect EMT conduit together to allow for 90 deg bends. UL listed. Use to connect EMT conduit together to allow for 90 deg bends

use to protect internal wire runs from nail punctures, as defined in the NEC Article 300-4.

To connect EMT conduit together to allow for 90 deg bends. UL listed. Use to connect EMT conduit together to allow for 90 deg bends