Compatible with MapPro® and propane, the project possibilities are endless. This torch is ideal for projects such as large diameter soldering, wood burning projects, brazing and cooking thanks to the continuous flame lock and pressure regulator features. Pressure regulated for consistent inverted use Efficient...

Compatible with Map-pro® and propane, the project possibilities are endless. This torch kit is ideal for projects such as large diameter soldering, wood burning projects, brazing and cooking thanks to the continuous flame lock and pressure regulator features. Kit includes high-heat torch head and...

BernzOmatic® max performance torch kit includes one max performance torch and one 14.1 oz BernzOmatic® Map-pro® cylinder. The torch is built with instant on/off ignition, an adjustable, ultra-swirl flame and flame lock option for continuous use. It is pressure regulated for consistent performance when...

The Bernzomatic Swivel Torch features an adjustable swirl flame and hassle-free, trigger-start ignition. It is built with a positional burn tube and is pressure-regulated to reduce the risk of pulsating or yellow flames when inverted, making it ideal for auto repair, brazing, large diameter...

Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools

Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...

For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.

Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. 40/60 alloy made of 40% tin and 60% lead Flux and solder in one saves time...

Oatey® wire solder is a tin-lead alloy wire solder commonly used for tin plating, seaming joints, copper DWV systems and sheet metal repair. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana or Pennsylvania

With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...

The right-angle clamp makes projects with 90 deg joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the right-angle clamp into a...

The Kreg® 90 deg corner clamp gives you the helping hand you need to hold 90 deg corners and T-joints together securely when you're assembling boxes, drawers, cabinets and cases. Plus, the 90 deg corner clamp leaves both of your hands free to add...

RIVET WHITE ALUM 1/8IN

Oatey Wire Solder Kit, Net Content: 1 oz, 1 oz, Solid, Compositions: 60 - 100% Tin, 1 - 5% Copper, 1 - 5% Bismuth, 1 - 5% Silver, Specific Gravity: 9 - 11, Applicable Materials: Bismuth, Copper, Tin

Our barbed fence staples are made from premium 8 g Bezinal® coated wire. These barbed fence staples feature double barbs to maintain fastening and provide easy driving. Shorter staple lengths are suitable for hardwood posts, while longer staple lengths are suitable for softwood posts....

Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leakproof seal will occur. Pressure may be applied after two minutes. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good...

The P3500 is a low velocity, semi-automatic 0.27 caliber tool which can be used to install 0.3 in head drive pins, 8 mm head drive pins and 1/4 -20 threaded studs, up to 3 in total length. The P3500 is designed for high-speed, durability...

CSI spiral drive pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with an 8 mm head and 0.157 in Dia shank in various lengths. A...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete

For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700. Color coded packaging makes size and product selection easy

Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana...

Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

The iconic Pony 3/4 in pipe clamp has become America's most popular and widely used pipe clamp fixture design. Our original steel multiple disc clutch design allows a secure hold and instant adjustment at any point along the pipe, without fear of slipping or...

Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Pony Bar Clamp, 1000 lb Weight, Maximum Opening Size: 36 in, Body Material: Steel, Body Color: Orange, Includes: (1) Clamp

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

The T50 staples are made of 0.05 wire. They come 1250 to a pack.

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

Jorgensen offers a wide range of bar clamps ideal for DIYers, hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers and everyone in between. Made with high-quality aluminum and steel to last as long as the pieces you craft.

Flat crown used for ceiling tile insulation. Pack size of 1250.

The arrow heavy-duty 506 contains 1250 1/2 in staples and are great for use in various light to heavy-duty home projects. Fits many Arrow models and will also fit other brands such as Powershot, Craftsman, Ace, Master Mechanic and Stanley. Ideal for use with...

Jorgensen offers a wide range of bar clamps ideal for DIYers, hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers and everyone in between. Made with high-quality aluminum and steel to last as long as the pieces you craft.

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80000 lb/sq-in of tensile strength. The fast acting sliding head is acme threaded...

The T50 staples are made of 0.05 wire. They come 1250 to a pack.

The T50 staples are made of 0.05 wire. They come 1250 to a pack. Uses Stanley® SharpShooter® TRA700 Series or Arrow® T-50® heavy-duty staples and 1/2 in, 9/16 in and 5/8 in brads Ideal for use with the T50SA and T50SHA

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar...

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.