Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. 40/60 alloy made of 40% tin and 60% lead Flux and solder in one saves time...

WIRE SOLDER 50/50 SOLID 453G

With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...

The right-angle clamp makes projects with 90 deg joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive-in the screws. Just slip the pin on the right-angle clamp into a pocket...

The Kreg® 90 deg corner clamp gives you the helping hand you need to hold 90 deg corners and T-joints together securely when you're assembling boxes, drawers, cabinets and cases. Plus, the 90 deg corner clamp leaves both of your hands free to add...

Used to connect gutter parts together and fasten other light-gauge metals. Theses rivets feature durable aluminum construction.

Oatey Wire Solder Kit, Net Content: 1 oz, 1 oz, Solid, Compositions: 60 - 100% Tin, 1 - 5% Copper, 1 - 5% Bismuth, 1 - 5% Silver, Specific Gravity: 9 - 11, Applicable Materials: Bismuth, Copper, Tin

Our barbed fence staples are made from premium 8 g Bezinal® coated wire. These barbed fence staples feature double barbs to maintain fastening and provide easy driving. Shorter staple lengths are suitable for hardwood posts, while longer staple lengths are suitable for softwood posts....

Fast, easy, permanent, fit in the copper pipe and within seconds a permanent leak-proof seal will occur. Pressure may be applied after 2 min. Can withstand pressures up to 500 psi. Withstands temperatures from -60 to 300 deg F. Meets US Military specifications. Good...

The P3500 is a low velocity, semi-automatic 0.27 caliber tool which can be used to install 0.3 in head drive pins, 8 mm head drive pins and 1/4 -20 threaded studs, up to 3 in total length. The P3500 is designed for high-speed, durability...

CSI spiral drive pins are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with an 8 mm head and 0.157 in Dia shank in various lengths. A...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled...

DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools 8 mm head drive pins for direct fastening into steel and concrete

For use with Stanley Fastening PHT150C, TR100, TR200, TRE500, TR100HL, Arrow: T50, T50PBN, ETF50, T55, HT50, Powershot 5700. Color-coded packaging makes size and product selection a CINCH

Oatey Rosin core wire solder is a tin lead alloy wire solder with a rosin flux-core. This solder is made for use in electrical applications, including wiring and other fine electronic work. Oatey products have earned the trust of plumbing professionals for over 100...

Oatey Rosin core wire solder is a tin lead alloy wire solder with a rosin flux-core. This solder is made for use in electrical applications, including wiring and other fine electronic work. Oatey products have earned the trust of plumbing professionals for over 100...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

The iconic Pony 3/4 in pipe clamp has become America's most popular and widely used pipe clamp fixture design. Our original steel multiple disc clutch design allows a secure hold and instant adjustment at any point along the pipe, without fear of slipping or...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

The T50 staples are made of 0.05 wire. They come 1250 to a pack.

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Flat crown used for ceiling tile insulation. Pack size of 1250.

The arrow heavy-duty 506 contains 1250 1/2 in staples and are great for use in various light to heavy-duty home projects. Fits many Arrow models and will also fit other brands such as Powershot, Craftsman, Ace, Master Mechanic and Stanley. Ideal for use with...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange, powder-coated finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 lb/sq-in of tensile strength. The fast-acting sliding head is acme threaded to accommodate...

The T50 staples are made of 0.05 wire. They come 1250 to a pack.

The T50 staples are made of 0.05 wire. They come 1250 to a pack. Uses Stanley® SharpShooter® TRA700 Series or Arrow® T-50® heavy-duty staples and 1/2 in, 9/16 in and 5/8 in brads Ideal for use with the T50SA and T50SHA

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar...

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

Nokorode regular paste flux is a lead-free, all-purpose, soft soldering paste flux ideal for use with 95/5 and other common solders. Nokorode special oil base protects the solder joint against corrosive attack. It cleans and fluxes all at one time. Cleans and fluxes in...

The HTX50 delivers the proven performance of the HT50 with upgraded ergonomics. The high-impact molded handle with rubber anti-slip hand grip delivers confidence and performance on any job. A unique handle guard protects the operator's hand from mishaps and the rear loading, two strip...

Arrow Staple, Crown Shape: Round, Crown Width: 5/16 in, Leg Length: 7/16 in, Steel, Suitable for: Up to 1/4 in Dia Low-Voltage Wire

Arrow Staple, Crown Shape: Round, Crown Width: 5/16 in, Leg Length: 9/16 in, Steel, Suitable for: Up to 1/4 in Dia Low-Voltage Wire

Consider the Pony light-duty bench vise with swivel base for your light-duty home, shop and professional use. These vises feature rugged strength you'd usually have to spend more for, with square four-hole swivel bases, sturdy steel jaw faces, ground and polished anvils, permanent pipe...

STAPLE RND F/T25 BX1100 3/8IN

The T50 staples are made of 0.05 wire. They come 1250 to a pack. Use on metals, castings, joints and rust