5/8" COMPRESSION COUPLE

ERITECH DRIVE SLEEVE

4SOL-8SOL SPLITBOLT CONNECTOR

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and...

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and...

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and...

nVent ERICO Ground Rod, Copper-Bonded Steel, Nominal Diameter: 5/8 in, 8 ft L, 80,000 lbf/sq-in Tensile Strength, Additional Information: 10 mil THK Plating 99.9% pure electrolytic copper coating Rods have a high-carbon steel core and tip that provide great strength when driving Copper coating...

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and...

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel....

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel....

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel....

Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. For use with copper-bonded ground rods

Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe, ground rods, or flexible gas pipe with brass hex fittings SH version for outdoor applications

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe or ground rods

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe or ground rods

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar...

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar...

Silicon bronze for copper to copper. UL listed.

Silicon bronze for copper to copper. UL listed. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar conductors and accommodates copper-to-copper, copper-to-aluminum and aluminum-to-aluminum connections

Silicon bronze for copper to copper. UL listed. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar conductors and accommodates copper-to-copper, copper-to-aluminum and aluminum-to-aluminum connections

Silicon bronze for copper to copper. UL listed. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar conductors and accommodates copper-to-copper, copper-to-aluminum and aluminum-to-aluminum connections

Silicon bronze for copper to copper. UL listed. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar conductors and accommodates copper-to-copper, copper-to-aluminum and aluminum-to-aluminum connections

Silicon bronze for copper to copper. UL listed. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar conductors and accommodates copper-to-copper, copper-to-aluminum and aluminum-to-aluminum connections

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar...

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar...

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar...

For use on copper, aluminum and ACSR conductors, the copper alloy bolt and pressure bar are completely tin-plated. Tin plating with a spacer allows connection of copper-to-copper, copper-to-aluminum and aluminum-to-aluminum. For 3/0 stranded 350 kcmil stranded. Unplated high-strength silicon bronze accommodates copper to copper...

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar...

With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Unplated high-strength silicon bronze accommodates copper to copper connections Tin-plated, high-strength copper alloy split bolt with spacer separates dissimilar...

The Intersystem Bonding Termination (IBTB), part of the Vent nVent ERICO line of facility electrical protection products, is designed to meet the requirements of the 2008 NEC® Article 250.94 bonding for other systems. The IBTB is mounted adjacent to the meter base or service...

1/2-1 UL ZINC PIPE CLAMP