Ramset Drive Pin with Washer, Head Type: Square, Head Diameter: 0.3 in, Steel, 3 in L

PIN DRIVE W/WSHER B100 1-1/2IN

Medium-strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Full visibility packaging simplifies product selection and storage

7/16 in crown. For use with Bostitch PC1000, PC2000, PC4000, PC5000, H30-8 and P6C-8 tackers. STCR50191/2-4M and STCR50191/2-1M do not fit H30-8 or P6C-8 tackers. STCR50191/2-1M also fits PC3000.

Used for light-duty household and crafting stapling jobs. Color-coded packaging for easy product selection, sturdy plastic packaging reduces staple breakage. Fits TR45 and arrow JT-21 staplers. Color-coded packaging makes size and product selection a CINCH Sturdy plastic packaging helps reduce stick breakage

Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the...

Fits Bostitch P6C-8, H30-8, PC4000, PC5000, T15, T15C, T58D4, JK:694, Prebena HHD-10, Rapid:31. Used for insulation and roofing paper applications.

Our 11 in TORQUE LOCK™ locking C-clamp with grip provides faster tool setup and more locking force. The locking C-clamp with grip has wide jaws that provide clamping versatility on a variety of sizes and shapes. The C-clamp locking pliers have durable, non-slip grips...

Our 9 in TORQUE LOCK™ locking C-clamp with swivel Jaws provides faster tool setup and more locking force. The swivel jaws provide surface stabilization and offer better damage protection. The innovative thumb screw provides you with a more convenient geometry for hand force, while...

Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

Milwaukee hook blades are designed to cut roofing, synthetic wrap, insulation and other building materials. Milwaukee utility blades are engineered to fit Milwaukee and most standard utility knives. 2X stronger than standard carbon hook blades replace fewer blades Optimized geometry delivers more pull force...

Milwaukee torque lock locking tools provide faster tool set-up and more locking force for the professional tradesmen. The patent-pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole...

Milwaukee torque lock locking tools provide faster tool set-up and more locking force for the professional tradesmen. The patent-pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole...

Milwaukee torque lock locking tools provide faster tool set-up and more locking force for the professional tradesmen. The patent-pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole...

SOLDER IRON BATTERY POWERED

Milwaukee torque lock locking tools provide faster tool set-up and more locking force for the professional tradesmen. The patent-pending thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole...

The heavy-duty Riveter is designed for use with aluminum, steel and stainless steel rivets in a wide range of applications, including metalworking, builder/remodeler, plumbing, mechanical and more. It includes four nose pieces and a nose piece wrench for versatility and easy change out for...

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in. Soft-grip...

Quick release' trigger allows for fast and easy positioning and release. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. High-tech resin construction provides strength and durability. Specially designed jaws hold odd-shaped workpieces. Quick-to-install and remove...

Irwin Spring Clamp with Soft Grip Pad, Clamping Capacity: 3 in, Steel, Blue/Silver, Dimensions: 6 in L Metal spring clamps with soft-grip pads

The Dremel® VersaFlame™ is a small butane torch designed to make your work around the house and jobsite easier. The VersaFlame™ comes with a nine-piece kit that gives you the power to tackle an array of applications. By simply switching tips, you can use...

Medium-strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Full visibility packaging simplifies product selection and storage

Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe or ground rods

Made of dropped forged steel and has a 18 oz, point and chisel head. Shock proof, spiral grip handle. Specially designed for welding applications. Black color. Shock proof, spiral grip handle 18 oz Head

Made of copper, for Weller soldering guns. Specs: tip O/D 0.165 in; reach/length 0.885 in.

The ideal tool accessory for any flooring, wood or upholstery job, these Spec Ops heavy-duty staples, 3/8 in are compatible with all Spec Ops staple guns and hammer tackers. These stainless steel standard staples were developed for optimum performance in most heavy-duty needs. Manufactured...

Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. 60/40 alloy made of 60% tin and 40% lead Flux and solder in one saves time...

Irwin Spring Clamp with Soft Grip Pad, Clamping Capacity: 1 in, Steel, Blue/Silver, Dimensions: 6 in L Metal spring clamps with hard plastic-grip pads

This 1000-packs of 9/16 in heavy-duty narrow crown staples are convenient and reliable. Used for heavy-duty stapling jobs such as insulation carpet underlayment and roofing felt, these staples come in sturdy plastic packaging to helps reduce breakage of the stick. With color-coded packaging, you...

With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...

The T72 heavy-duty wire and cable staple gun is a reliable tacker that shoots large insulated staples for the professional installation of twin and earth wire and communications and data cable. With a wire guide included, the all-steel T72 takes 5 mm or 9...

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Type: Flat, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc-Plated, Blue, 2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Type: Flat, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc-Plated, Blue, 1-1/4 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Drive Pin with Flute, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Point Type: Plain, Steel, Blue, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Steel, Zinc-Plated, Blue, 3 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Powder Load, Caliber Load: 0.27, Power Level: 3, Load Type: Long Strip, Color Code: Green, 6.8 mm Dia, 11 mm L, Suitable for: POWERS P3500, PA3500, P3600, Ramset SA270, Viper, Cobra, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460 and All Other...

Blue Point Fasteners Drive Pin with Plastic Washer, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Knurled, Shank Diameter: 0.145 in, Steel, Blue, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Drive Pin with Flute, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Point Type: Plain, Steel, Plain, Blue, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

0.22 caliber low velocity single shot load can be used for POWERS® P1000, P2201, RAMSET® 721, M70, HILTI® DXE37 and DXE72, SIMPSON® PT22, PT22H.

LOAD GREEN .27 CAL LONG STRIP

Blue Point Fasteners Drive Pin with Flute, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Point Type: Plain, Steel, Blue, 1 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

The BP301C is engineered and designed as a low velocity, semi-automatic 0.27 caliber tool that can be used to install 0.300/8 mm headed drive pins and 1/4 in-20 threaded studs, up to 2-1/2 in total length. This tool is designed for high-speed use and...

The BP307S is a low velocity powder actuated, single shot, 0.22 caliber tool which can be used to install 0.3 in to 0.315 in head drive pins and 1/4 -20 threaded studs, up to 3 in total length. The BP307S is designed for maintenance,...

Oatey 95/5 lead-free Rosin core wire solder is a tin antimony wire solder with a rosin flux-core. This solder is designed for use in electrical applications. Oatey products have earned the trust of plumbing professional for over 100 years. Lead-free wire solder containing rosin...

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Steel, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tool

The Stanley Fatmax hammer tacker driver mechanism is a true time-saver, delivering more than 500,000 cycles and featuring an anti-jam mechanism and surface guard. The bottom-load, high-capacity magazine accepts up to two full sticks or staples. Chrome-plated steel construction frame and comfort-grip. Driver mechanism...

Blue Point Fasteners Drive Pin with Flute, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Point Type: Plain, Steel, Blue, 3 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

Blue Point Fasteners Drive Pin with Flute, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.145 in, Point Type: Plain, Steel, Blue, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tools

The Arrow fastener T50 galvanized steel staples feature a divergent point which twists the staple slightly as it enters the material. The Arrow's 3/8 in T50 staples are made with a 1/2 in crown width and a 3/8 in leg length. This Industrial Pak...

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Steel, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder Actuated Tool