Eye lag screws screw into wood ceiling joists to attach hanger wire for suspended ceilings. An eye lag screw is fashioned with an eye for threading the hanger wire and a lag thread on the other end for securing in the wood. Pre-drilling is...

Hanger wire is used to suspend ceiling grid main tees from the overhead structure. Designed for residential applications. The continuous 300 ft roll lets you cut the lengths you want with no waste. Use to suspend main tees from the overhead structure Wear it...

Eye lag screws are specifically designed for attaching ceiling grid hanger wire to any wood overhead. The hanger wire is threaded through the eye and twisted off before or after the eye lag screw is installed. Pre-drilling is recommended for the strongest attachment. Screw...

Toolpro Barnacle Display Hanger, Aluminum, White, Suitable for: 1 in Ceiling Grid 12 pair (left and right)

Toolpro Sure Corner Drywall Corner Tape, Paper/Steel, 100 ft L, 2 in W Applies easily with joint compound - no nails or screws Finishes any corner or angle on drywall corners Forms smooth, straight, strong corners Steel reinforced paper tape Metal must face the...

The square hole utility blade is a standard blade with a mounting hole in the center for use with the Toolpro shadowline cutter. Used to create a shadowline or reveal edges on ceiling tiles. High-quality blue steel blades stay sharper longer. Heavy-duty 0.025 in...

The pocket rasp quickly and easily removes material from the edges of ceiling tiles and drywall for a closer fit. It shaves and shapes edges of many materials including wood, laminates and foam board. It does not clog or collect dust, is comfortable to...

The TP02060 roll lifter positions a sheet of drywall on the wall before fastening. Push it under the bottom edge of the sheet and kick it in tight against the studs. When you step on the roll lifter to lever the sheet up, the...

Toolpro Mini Lifter, 50 lb Weight, Steel, Powder-Coated, 2 in L, 9 in W, 2-1/2 in H, Suitable for: 2 to 12 in L Drywall Sheets Lifts and holds drywall sheet close to the wall Welded heavy steel construction, plated and powder-coated Compact design...

At only 14 lb, these magnesium stilts are the lightest stilts you can buy. They are ideal for any work up high such as drywall, ceiling installation, painting, trim and electrical. They allow you to work without ladders or scaffolds and are the ultimate...

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

When your stilts become worn with use, be safe. Repair them with the necessary repair kit. Only simple tools are required. Safety first, keep your stilts in good condition Cheaper and faster than buying new stilts

Toolpro Mesh Tape, Self-Adhesive, 300 ft L, 1-7/8 in W, Fiberglass, White

Toolpro Mesh Tape, Self-Adhesive, 300 ft L, 1-7/8 in W, Fiberglass, Yellow

Toolpro 4 x 4 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick,...

Toolpro 6 x 6 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick,...

Toolpro 8 x 8 in wall repair patches are constructed of self-adhesive fiberglass mesh over a square of very thin perforated galvanized steel. Just press the wall patch over the hole, finish with drywall mud and paint as you desire. The repair is quick,...

Toolpro Eye Lag Screw, Thread Size: 1/4 in, 2 in L, Stainless Steel, Package Quantity: 100 PK, Self-Tapping, Silver, Applicable Materials: Metal Self-tapping eye lag screws for attaching ceiling hanger wire to metal joists Ideal dimensions for use on ceiling grid tees

This heavy-duty tool easily installs eye lag screws up to 4-1/2 in. long as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver. Easily drives eye lag...

This heavy-duty tool easily installs eye lag screws up to 4-1/2 in L as well as self-tapping eye lags screws for metal. Overall length is 2.7 in and will fit any standard size chuck. Use with any drill or driver. Easily drives eye lag...

Lever action grid clamps temporarily connect ceiling grid and firmly hold leveling line during the layout process. Each clamp is made from spring steel and is easy to operate with a single hand. Rubber tips on the clamps hold the grid and leveling line...

Leveling line is a high-strength line that will not sag or stretch. Each Line is 450 ft and unspools from the center core of the tubular casing this prevents tangling and allows you to use only what is needed. This line is used during...

This grid punch is the most reliable and economical tool for preparing non-standard lengths of ceiling grid for fastening with rivets. Hardened pin will easily pierce 18 ga steel with little effort, allowing one-hand operation while freeing the other hand to hold the material...

Use as replacement/rebuild kit for TP05060 Toolpro grid punch.

Pull rivets are used when you can easily access only one side of the materials you want to fasten. These are widely used for installing suspended ceilings. Use black rivets with black ceiling grid for minimal visibility. All-aluminum construction will not rust. Connect ceiling...

Pull rivets are used when you can easily access only one side of the materials you want to fasten. These are widely used for installing suspended ceilings. Use white rivets with white ceiling grid for minimal visibility. All-aluminum construction will not rust. Connect ceiling...

Pull rivets are used when you can easily access only one side of the materials you want to fasten. These are widely used for installing suspended ceilings. Use Toolpro hand rivet tool to install. Connect ceiling grid cut at non-standard lengths Punch hole with...

The hand rivet tool installs pull rivets in thin materials using only one hand. This is most widely used for connecting suspended ceiling grids and like materials. Also useful for many jobs around the shop. Securely fastens 3/32 in, 1/8 in, 5/32 in and...

The Shadowline cutter creates ideal Shadowline or reveal edges on ceiling tiles and acoustical panels. The one-piece all-steel design is comfortable to hold and use. This contractor-proven tool will not only make the most professional looking cuts possible. It will pay for itself on...

Designed to lock on top of ceiling grid after adjacent ceiling tiles are dropped in for holding down acoustical tiles in drafty entranceways and low security areas. After inserting adjacent tiles slide clip over T-bar until base of clip makes contact with tile. To...

These strong clamps are used for temporarily holding ceiling grid together during assembly and for holding leveling line. They are easily operated with one hand. They are also useful for many jobs around the shop and house. Strong spring clamps and holds firmly Nickel-plated...

The purlin clip tool is used to install spring steel purlin clips. It works well with both Z-clips (diagonal flanges) and C-clips (vertical flanges). The clips may be installed with or without the chain or wire attached. Easily installs all popular purlin clips on...

These heavy-duty drywall cut-out bits have a 3/16 in shaft that is sure to hold up longer than the standard 1/8 in cut-out bit. They consistently make the better cut possible without running out on you. This is just one more of the Toolpro...

These stilts are ideal for any work up high such as drywall, ceiling installation, painting, trim and electrical. They allow you to work without ladders or scaffolds and are the ultimate in mobility. All repair parts are available and field replaceable. Adjustable height from...