-
Vendor: WATTS
Watts LL100XL Series 0066132 Relief Valve, 3/4 in, MNPT x FNPT, Bronze Body
Extra extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features an extended shank...- $62.51
- $62.51
- Unit price
- per
-
Vendor: WATTS
Watts N1-NA Nuzzle Assembly, Flippen, Specifications: 1/4-20 TPI Thread, 4 oz Weight, 10 in L Rod, Brass
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Allows ball to float freely Designed...- $19.28
- $19.28
- Unit price
- per
-
Vendor: WATTS
Watts N5-NA Nuzzle Assembly, Flippen, Specifications: 5/16-18 TPI Thread, 5 oz Weight, 12 in L Rod, Brass
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Allows ball to float freely Designed...- $27.60
- $27.60
- Unit price
- per
-
Vendor: WATTS
Watts P-681 Supply Line Valve, Push-Fit, Plastic
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877,...- $14.88
- $14.88
- Unit price
- per
-
Vendor: WATTS
Watts P-840/3523-14 Union Pipe Tee, 3/4 in, Sweat Push-Fit, Plastic, White, 100 psi Pressure
Connection shall be made using Watts® series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect....- $17.78
- $17.78
- Unit price
- per
-
Vendor: WATTS
Watts P6 Flippen Tank Float, 6 in Dia, Plastic
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F. Non-electrolytic and highly corrosion-resistant Unaffected by salts and caustic fluids Resistant to sunlight deterioration- $17.00
- $17.00
- Unit price
- per
-
Vendor: WATTS
Watts P8 Flippen Tank Float, 8 in Dia, Plastic
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F. Non-electrolytic and highly corrosion-resistant Unaffected by salts and caustic fluids Resistant to sunlight deterioration- $20.00
- $20.00
- Unit price
- per
-
Vendor: WATTS
Watts PL-3000 Pipe Union Coupling, 1/4 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.38
- $5.38
- Unit price
- per
-
Vendor: WATTS
Watts PL-3002 Tube Elbow, 1/4 in, OD x OD, 90 deg Angle, Plastic, 150 psi
This quick-connect elbow fitting works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature insures zero-leak connections....- $5.26
- $5.26
- Unit price
- per
-
Vendor: WATTS
Watts PL-3003 Pipe Tee, 1/4 in, Push-Fit, Plastic, 150 psi
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.79
- $5.79
- Unit price
- per
-
Vendor: WATTS
Watts PL-3003 Pipe Tee, 1/4 in, Push-Fit, Plastic, White, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.89
- $5.89
- Unit price
- per
-
Vendor: WATTS
Watts PL-3004 Pipe Adapter, 1/4 x 1/8 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.09
- $5.09
- Unit price
- per
-
Vendor: WATTS
Watts PL-3005 Pipe Adapter, 1/4 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.19
- $5.19
- Unit price
- per
-
Vendor: WATTS
Watts PL-3006 Pipe Adapter, 1/4 x 3/8 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.14
- $5.14
- Unit price
- per
-
Vendor: WATTS
Watts PL-3007 Pipe Adapter, 1/4 x 1/2 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.25
- $5.25
- Unit price
- per
-
Vendor: WATTS
Watts PL-3008 Tube Elbow, 1/4 x 1/8 in, 90 deg Angle, Nylon, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.20
- $5.20
- Unit price
- per
-
Vendor: WATTS
Watts PL-3009 Tube Elbow, 1/4 in, OD x MIP, 90 deg Angle, Plastic, 150 psi
This 1/4 in x 1/8 in MIP quick-connect elbow works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubings. It is easy-to-install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring...- $5.20
- $5.20
- Unit price
- per
-
Vendor: WATTS
Watts PL-3011 Stop Valve, 1/4 in Connection, Compression, 150 psi Pressure, Manual Actuator, CPVC Body
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $13.02
- $13.02
- Unit price
- per
-
Vendor: WATTS
Watts PL-3012 Stop Valve, 1/4 in Connection, Compression x MPT, 150 psi Pressure, Manual Actuator, CPVC Body
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $12.46
- $12.46
- Unit price
- per
-
Vendor: WATTS
Watts PL-3015 Pipe Union Coupling, 5/16 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.42
- $6.42
- Unit price
- per
-
Vendor: WATTS
Watts PL-3016 Reducing Pipe Union Coupler, 5/16 x 1/4 in, Plastic, 150 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $7.00
- $7.00
- Unit price
- per
-
Vendor: WATTS
Watts PL-3020 Pipe Union Coupling, 3/8 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.31
- $6.31
- Unit price
- per
-
Vendor: WATTS
Watts PL-3021 Pipe Union Coupling, 3/8 x 1/4 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.96
- $5.96
- Unit price
- per
-
Vendor: WATTS
Watts PL-3022 Tube Elbow, 3/8 in, OD x OD, 90 deg Angle, Plastic, 150 psi
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.00
- $6.00
- Unit price
- per
-
Vendor: WATTS
Watts PL-3023 Pipe Tee, 3/8 in, Push-Fit, Plastic
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $8.92
- $8.92
- Unit price
- per
-
Vendor: WATTS
Watts PL-3023 Pipe Tee, 3/8 in, Push-Fit, Plastic
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National plumbing Codes.- $7.84
- $7.84
- Unit price
- per
-
Vendor: WATTS
Watts PL-3024 Pipe Adapter, 3/8 x 1/8 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.98
- $5.98
- Unit price
- per
-
Vendor: WATTS
Watts PL-3025 Pipe Adapter, 3/8 x 1/4 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $4.86
- $4.86
- Unit price
- per
-
Vendor: WATTS
Watts PL-3025 Pipe Adapter, 3/8 x 1/4 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National plumbing Codes.- $5.60
- $5.60
- Unit price
- per
-
Vendor: WATTS
Watts PL-3026 Pipe Adapter, 3/8 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $4.92
- $4.92
- Unit price
- per
-
Vendor: WATTS
Watts PL-3027 Pipe Adapter, 3/8 x 1/2 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.91
- $5.91
- Unit price
- per
-
Vendor: WATTS
Watts PL-3028 Tube Elbow, 3/8 x 1/4 in, 90 deg Angle, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.94
- $5.94
- Unit price
- per
-
Vendor: WATTS
Watts PL-3029 Tube Elbow, 3/8 in, OD x MPT, 90 deg Angle, Plastic, 150 psi
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.00
- $6.00
- Unit price
- per
-
Vendor: WATTS
Watts PL-3030 Pipe Union Coupling, 1/2 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.52
- $5.52
- Unit price
- per
-
Vendor: WATTS
Watts PL-3031 Reducing Pipe Union Coupler, 1/2 x 3/8 in, Plastic, 60 psi Pressure
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $7.16
- $7.16
- Unit price
- per
-
Vendor: WATTS
Watts PL-3032 Tube Elbow, 1/2 in, 90 deg Angle, Plastic, 150 psi
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.67
- $6.67
- Unit price
- per
-
Vendor: WATTS
Watts PL-3033 Pipe Tee, 1/2 in, Push-Fit, Plastic
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $10.74
- $10.74
- Unit price
- per
-
Vendor: WATTS
Watts PL-3033 Pipe Tee, 1/2 in, Push-Fit, Plastic
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National plumbing Codes.- $11.26
- $11.26
- Unit price
- per
-
Vendor: WATTS
Watts PL-3035 Pipe Adapter, 1/2 x 3/8 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.40
- $5.40
- Unit price
- per
-
Vendor: WATTS
Watts PL-3036 Pipe Adapter, 1/2 in, Compression x MPT, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.38
- $5.38
- Unit price
- per
-
Vendor: WATTS
Watts PL-3038 Tube Elbow, 1/2 x 3/8 in, 90 deg Angle, Plastic, 150 psi Pressure
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $5.83
- $5.83
- Unit price
- per
-
Vendor: WATTS
Watts PL-3039 Tube Elbow, 1/2 in, OD x MIP, 90 deg Angle, Plastic, 150 psi
Plastic quick-connect fittings are made from polysulfone, a high-performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, PEX, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $6.33
- $6.33
- Unit price
- per
-
Vendor: WATTS
Watts PL-3041 Stop Valve, 3/8 in Connection, Compression, 150 psi Pressure, Manual Actuator, CPVC Body
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $12.88
- $12.88
- Unit price
- per
-
Vendor: WATTS
Watts PL-3042 Stop Valve, 3/8 in Connection, Compression x MPT, 150 psi Pressure, Manual Actuator, CPVC Body
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.- $13.07
- $13.07
- Unit price
- per
-
Vendor: WATTS
Watts PL-3047 End Cap, 1/4 in, Plastic, White, 150 psi Pressure
Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.- $5.19
- $5.19
- Unit price
- per
-
Vendor: WATTS
Watts PL-3047 End Cap, 1/4 in, Plastic, White, 150 psi Pressure
Connects to copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.- $5.47
- $5.47
- Unit price
- per
-
Vendor: WATTS
Watts PL-3060 Pipe Adapter, 1/4 in, Tube x FIP, Plastic, 150 psi Pressure
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.- $4.25
- $4.25
- Unit price
- per
-
Vendor: WATTS
Watts PL-3065 Pipe Adapter, 3/8 x 1/4 in, Tube x FIP, Plastic, 150 psi Pressure
Incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.- $5.78
- $5.78
- Unit price
- per
-
Vendor: WATTS
Watts PX Series P8-7 Float Ball, Flippen, Plastic, For: Stems and Nuzzle Assemblies, Automatic Watering Kits
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F. Non-electrolytic and highly corrosion-resistant Unaffected by salts and caustic fluids All injection molded polyethylene construction Resistant to sunlight deterioration- $20.44
- $20.44
- Unit price
- per
-
Vendor: WATTS
Watts ST1000 Mechanical Float Valve, 1 in, FNPT, 1/4-20 Rod, 1 in L Rod, Bronze Body
Series ST1000 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 1 in male NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This...- $33.07
- $33.07
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.