Southwire® Junction Box, Number of Knockouts: 17, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 21 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 1-1/2 in D Combination knockouts allow for greater wiring flexibility 4 in square boxes are used...

Southwire® Junction Box, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 21 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 1-1/2 in D Combination knockouts allow for greater wiring flexibility

Southwire® Junction Box, Number of Knockouts: 14, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 21 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 1-1/2 in D, Stud Mounting, Includes: W Bracket and Mounting Screws Combination knockouts allow for greater...

Southwire® Deep-Welded Junction Box, Number of Knockouts: 12, Knockout Size: 1/2, 3/4, 1 in, Cubic Capacity: 30.3 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 2-1/8 in D Combination knockouts allow for greater wiring flexibility

Southwire® Bracketed Box, Knockout Size: 1/2, 1/2 to 3/4 in, Cubic Capacity: 30.3 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 2-1/8 in D, Stud Side Mounting Combination knockouts allow for greater wiring flexibility Combination Phillips/Slotted screw heads Flat...

Southwire® Bracketed Junction Box, Number of Gangs: 2, Number of Knockouts: 14, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 30.3 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 2-1/8 in D, Stud Side Mounting, Includes: F-Type Bracket Combination knockouts...

Southwire® Bracketed Junction Box, Number of Gangs: 2, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 30.3 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4 in H x 2-1/8 in D Combination knockouts allow for greater wiring flexibility Raised...

Southwire® Flat Blank Cover, Square, Steel, Zinc-Plated, Silver, 4 in W, 0.06 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

Southwire® Device Ring, Square, Number of Gangs: 1, Steel, Galvanized, Silver, 4 in W, 1/2 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square single device rings are used with 4 in square boxes to mount switches, receptacles and devices. Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

4 in square to round raised device rings are used to mount light fixtures in walls and ceilings. Rings convert a 4 in square box to a 3-1/2 in round opening with #8-32 threaded mounting tabs for lighting retrofit applications. Fixture ears 2-3/4 in...

4 in square to round raised device rings are used to mount light fixtures in walls and ceilings. Rings convert a 4 in square box to a 3-1/2 in round opening with #8-32 threaded mounting tabs for lighting retrofit applications. Fixture ears 2-3/4 in...

4 in square to round raised device rings are used to mount light fixtures in walls and ceilings. Rings convert a 4 in square box to a 3-1/2 in round opening with #8-32 threaded mounting tabs for lighting retrofit applications. Fixture ears 2-3/4 in...

4 in square to round raised device rings are used to mount light fixtures in walls and ceilings. Rings convert a 4 in square box to a 3-1/2 in round opening with #8-32 threaded mounting tabs for lighting retrofit applications. Fixture ears 2-3/4 in...

Southwire® Blank Cover, Square, Steel, Galvanized, Silver, 4 in W, 0.06 in H, Includes: 1/2 in Knockout

Southwire® Device Ring, Square, Number of Gangs: 1, Steel, Galvanized, Silver, 4 in W, 1/4 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

Southwire® Flat Device Ring, Square, Number of Gangs: 1, Steel, Galvanized, Silver, 4 in W, 0.06 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

Southwire® Square Extension Ring, Number of Knockouts: 12, Steel, Galvanized, Silver, 4 in W, 1-1/2 in H

Southwire® Square Extension Ring, Number of Knockouts: 12, Steel, Galvanized, Silver, 4 in W, 1-1/2 in H Combination knockouts allow for greater wiring flexibility

Southwire® Square Extension Ring, Number of Knockouts: 12, Steel, Galvanized, Silver, 4 in W, 1-1/2 in H Converts switch box to 4 in square Combination knockouts allow for greater wiring flexibility

Consists of two cross-linked polyethylene insulated phase conductors triplexed with a yellow-striped, cross-linked polyethylene insulated neutral. High quality heat and moisture-resistant cross-linked polyethylene is rated 75 deg C for wet and 90 deg C for dry locations. 120 A maximum in duct or 165...

Southwire® Power Cable, Flexible, 8 AWG Wire, 250 ft Length, 4 Conductors, Copper Conductor, Stranded, 600 V, 35 A, -50 to 105 deg C Operating

Southwire® Power Cable, Flexible, SJEW, 18 AWG Wire, 2 Conductors, Strands per Conductor: 16, 16/30 Strand, Copper Conductor, TPE Conductor Insulation, Stranded, TPE Sheath, Black/White Sheath, 300 V, -50 to 105 deg C Operating

For use with outdoor low voltage lighting systems operating at 30 V or less. Put light fixtures where you want or expand a set. UL listed. Made in the USA. For use with outdoor low voltage lighting systems operating at 30 V or less...

Southwire® Ceiling Pan Box, Cable Entry: Knockout, Number of Knockouts: 2, Cubic Capacity: 5.5 cu-in, Round, Steel, Galvanized, Silver, 4 in W, 1/2 in D, Wall Mounting, Includes: Old Work Clamp and Pigtail

Southwire® Flat Bottom Ceiling Pan Box, Cable Entry: Knockout, Number of Knockouts: 2, Cubic Capacity: 5-1/2 cu-in, Round, Steel, Galvanized, Silver, 4 in W, 1/2 in D, Wall Mounting

4 in round 1/2 in D boxes with bottom knockouts are used to install ceiling fans and heavy lighting fixtures fans. Ceiling fan boxes made with a versatile combination head screw and a raised ground. Installed in ceilings or walls for mounting ceiling fans...

For use with audio/video, radio frequency and CATV/MATV transmissions. Copper conductors, PVC insulation. 95% copper braid, 500 ft, 300 V.

Southwire® Rotary Cable Cutter, Cable Type: Armored, Cable Size: #10, #12, #14, 7-1/2 in OAL, Includes: (2) Rotary Cable Cutters

Southwire® Replacement Blade, Blue, Metal, Suitable for: BX/MC Rotary Cutters

Southwire® 12-in-1 Multi-Bit Screwdriver, Tip Type: Phillips, Slotted, Square Recessed, #1, #2, #3, 1/2 in, 1/4 in, 3/16 in, 3/8 in, 5/16 in Tip, Cushion Grip Handle, Rubber Handle, Includes: 3/16 in, 1/4 in, 5/16 in Slotted, #1, #2, #3 Phillips, #1, #2 Square...

Type THHN insulation, rated 90 deg C, 600 V. Gray PVC jacket. For applications of direct burial, dwellings not exceeding 3 floors above grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry and corrosive locations, general...

Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 V maximum. PVC insulation and UL62, UL1581 listed. Spool.

Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 V maximum. PVC insulation and UL62, UL1581 listed. Spool. Thermoplastic PVC jacket, not for hard usage in...

Annealed (soft) copper conductor cable, with a ground wire, primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C...

Made from American forged steel, the SCP9TPCD-US is built to withstand jobsite wear and tear. Assembled with hot rivet technology, these pliers are equipped to meet the needs of every professional Journeyman. Our tradesmen and women meet every job with heart and pride. Their...

Made from durable heat-treated steel, the S1020SOL-US is equipped to withstand any jobsite. It strips and cuts up to 10 to 20 AWG solid and 12 to 22 AWG solid wire. These wire strippers are made for the professional. Our tradesmen and women meet...

Made from durable heat-treated steel, the S1018SOL-US is equipped to withstand any jobsite. It strips and cuts up to 10 to 18 AWG solid and 12 to 20 AWG stranded wire. These wire strippers are made for the professional. Our tradesmen and women meet...

Southwire® 6-in-1 Multi-Driver, Steel Shank, Cushion Grip Handle, 9-1/4 in Overall Length, Includes: 3/16 in, 1/4 in, 5/16 in, 3/8 in, 7/16 in and 9/16 in Nut Drivers Chrome-plated S2 steel is corrosion-resistant for long-lasting performance and use Integral flanges within handle provide a...

The Southwire® tools and equipment 21510N 400 A AC clamp meter offers the features needed for routine electrical repairs. In addition to measuring AC current up to 400 A, the 21510N measures AC and DC voltage up to 600 V plus provides common multi-meter...

Easy-to-use receptacle tester identifies common wiring errors in 120 VAC outlets plus tests GFCI outlets. Performs seven tests including the GFCI test. Push button GFCI test allows you to quickly test that the GFCI trip function is working Fast and accurate Southwire's 120 VAC...