Model 40141S four-way voltage tester is a handy, pocket size tester that checks live AC voltage from 120 to 480 V and DC voltage from 160 to 600 V in four easy steps. The 40141S is easy to read and features a convenient, compact...

Southwire® Building Wire, THHN, Wire Size: 6 AWG, 500 ft L, Number of Conductors: 1, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Stranded, Sheath Material: PVC, Sheath Color: Green, 600 VAC, 55 A, Operating Temperature: 90 deg C

Southwire® Building Wire, THHN, Wire Size: 6 AWG, 500 ft L, Number of Conductors: 1, Conductor Material: Copper, Conductor Insulation: PVC, Stranded/Solid: Stranded, Sheath Material: PVC, Sheath Color: Red, 600 VAC, 55 A, Operating Temperature: 90 deg C

Southwire® Bare Electrical Wire, Wire Size: 6 AWG, Conductor Material: Copper, Stranded/Solid: Solid, 315 ft L, 125 A, Operating Temperature: 75 deg C

Flexible and easily shaped, formed, welded and soldered into place. Use in overhead transmission and distribution systems and for grounding grid systems.

Southwire® Welded Junction Box, Number of Gangs: 2, Number of Knockouts: 14, Knockout Size: 1/2, 3/4, 1 in, Cubic Capacity: 42 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4-11/16 in H x 2-1/8 in D Raised ground

Southwire® Junction Box, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Cubic Capacity: 42 cu-in, Cable Entry: Knockout, Silver, Square, Steel, Galvanized, Dimensions: 4-11/16 in H x 2-1/8 in D Drawn design ideal for surface mounting Combination knockouts allow for greater wiring flexibility...

Southwire® Flat Blank Cover, Square, Steel, Zinc-Plated, Silver, 4-11/16 in W, 0.06 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members Provide a means for access when future conduit runs are required

Southwire® Device Ring, Square, Number of Gangs: 1, Steel, Zinc-Plated, Silver, 5.63 in W, 3-1/2 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members Tapped #6-32 device mounting tabs

Southwire® Device Ring, Square, Number of Gangs: 2, Steel, Galvanized, Silver, 4-3/4 in W, 1/2 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members Tapped #6-32 device mounting tabs

Southwire® Square To Round Fixture Ring, Hole Diameter: 3-1/2 in, Steel, Galvanized, Silver, 4-11/16 in W, 1/2 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

Southwire® Box Cover, Square, Hole Diameter: 2.141 in, Number of Gangs: 1, Steel, Galvanized, 4-3/4 in W, 1/2 in H, Includes: Mounting Hardware Crushed corner design allows use of standard box cover screws

Southwire® Exposed Work Cover, Square, 4-11/16 in L, 2-5/8 in W

Southwire® Flat Blank Cover, Square, Hole Diameter: 1/2 in, Steel, Zinc-Plated, Silver, 4-11/16 in W, 0.06 in H Angled slots on the covers compensate for up to 12 deg of box misalignment on upright framing members

Type THHN insulation, rated 90 deg C, 600 V. Gray PVC jacket. For applications of direct burial, dwellings not exceeding 3 floors above grade, underground feeder to outdoor lighting or apparatus, exposed or concealed wiring in damp, moist, wet, dry and corrosive locations, general...

Southwire® SIMpull THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 V. SIMpull THHN copper conductors are designed...

Southwire® SIMpull THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 V. SIMpull THHN copper conductors are designed...

Southwire® Bare Wire, Wire Size: 8 AWG, Conductor Material: Copper, Stranded/Solid: Solid, 500 ft L, 95 A, Operating Temperature: 75 deg C

Southwire® SIMpull THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 V. SIMpull THHN copper conductors are designed...

Two bare copper conductors laid flat with integral PVC insulation and jacket. Clear jacket construction has one bare copper and one tinned copper conductor. Temperature rated from -20 to 60 deg C, operating voltage 300 V maximum. 18/2 stranded, flat, boxed. UL Standard 13...

Alflex™ Type RWA is manufactured with a lightweight, high-strength aluminum alloy. Metal strip is helically formed into continuously interlocked flexible metal conduit that can withstand impact and crushing forces. Provides mechanical protection for conductors and cable 66% lighter than steel Cuts 80% faster than...

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Pre-installed conductors within an overall protective metallic interlocked armor. 45% lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90...

Pre-installed conductors within an overall protective metallic interlocked armor. 45% lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90...

Pre-installed conductors within an overall protective metallic interlocked armor. 45% lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90...

Pre-installed conductors within an overall protective metallic interlocked armor. 45% lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90...

Used to connect mobile homes to a supply of electricity where permanent wiring is required as specific by NEC Article 550-24 and complies with NEC Article 338-1. Compact Stranded 8000 Series aluminum alloy. 600 V. Cross-linked, polyethylene (XLPE). Types USE-2/RHH/RH, W-2. Approved for direct...

Used to connect mobile homes to a supply of electricity where permanent wiring is required as specific by NEC Article 550-24 and complies with NEC Article 338-1. Compact Stranded 8000 Series aluminum alloy. 600 V. Cross-linked, polyethylene (XLPE). Types USE-2/RHH/RH, W-2. Approved for direct...

Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact...

Southwire® Elite 1100 Portable Power Station, Wattage Rating: 1166 W-hr, 12 V, 10 A, Includes: 8-in-1 DC Adapter Set Pure sine wave ensure your delicate electronics run properly and are protected with clean power output Ideal for emergency backup power, camping/RVs and remote power...

Southwire® Elite 200 Portable Power Station, Wattage Rating: 222 W-hr, 12 V, Includes: 8-in-1 DC Adapter Set Pure sine wave ensure your delicate electronics run properly and are protected with clean power output Ideal for camping, backup home power and remote power Runs a...

Southwire® Elite 500 Portable Power Station, 12 VDC, Wattage Rating: 27 W, Number of Outlets: 2, Number of Ports: 4, Plug Type: 3-Prong, Includes: 8-in-1 DC Adapter Set 296 Wh UL certified lithium-ion battery Pure sine wave ensure your delicate electronics run properly and...

Southwire® Pop Up Floor Box Kit, Round, Number of Outlets: 2, Cable Entry: Knockout, Number of Knockouts: 10, Cubic Capacity: 42.8 cu-in, Brass Cover, 5-1/2 in W, 3 in D, Drop-In Mounting, Includes: Device, Box and Cover Pop up cover design retracts when not...

Southwire® Fish Tape, Tape Profile: Flat, Steel Tape Material, 125 ft Tape Length, 1/8 in Tape, Dimensions: 17 in H x 13 in W x 1-3/4 in D Southwire's 1/8 in wide tempered spring steel fish tapes provide excellent fishing performance and are the...

Southwire® Fish Tape, Tape Profile: Flat, Steel Tape Material, 25 ft Tape Length, 1/8 in Tape, Dimensions: 8-1/2 in H x 7 in W x 1 in D Southwire's 1/8 in wide tempered spring steel fish tapes provide excellent fishing performance and are the...

Spiral extruded polymer design reduces the amount of effort required to push or pull the fish tape through EMT or PVC conduit. Works great in either filled or empty conduit Excellent for use in up to 2 in conduit Comes with either a 360...

Southwire® Data Cable, Twisted, Cat5e Category Rating, 4 Conductors, Copper Conductor, PVC Conductor Insulation, Blue/Brown/Green/Orange/White Sheath

Southwire® 1-Gang Draft Seal Kit, PVC, Black/Green, 5-3/4 in Length, 4.35 in Width, 0.7 in Thickness, Wall Mounting, Includes: Gasket Works with all standard nonmetallic boxes Green color easily identifiable after drywall install Eliminated need for caulking or sealants Complies with IECC and LEED...

Southwire® 2-Gang Draft Seal Kit, PVC, Black/Green, 6-1/2 in Length, 6 in Width, 0.8 in Thickness, Wall Mounting, Includes: Gasket Works with all standard nonmetallic boxes Green color easily identifiable after drywall install Eliminated need for caulking or sealants Complies with IECC and LEED...

Southwire® 3-Gang Draft Seal Kit, PVC, Black/Green, 8.4 in Length, 6.6 in Width, 1.2 in Thickness, Wall Mounting, Includes: Gasket Works with all standard nonmetallic boxes Green color easily identifiable after drywall install Eliminated need for caulking or sealants Complies with IECC and LEED...

Southwire® 4-Gang Draft Seal Kit, PVC, Black/Green, 10.2 in Length, 6.2 in Width, 1 in Thickness, Wall Mounting, Includes: Gasket Works with all standard nonmetallic boxes Green color easily identifiable after drywall install Eliminated need for caulking or sealants Complies with IECC and LEED...

Southwire® 5-Gang Draft Seal Kit, PVC, Black/Green, 6 in Length, 6 in Width, 1.8 in Thickness, Wall Mounting, Includes: Gasket Works with all standard nonmetallic boxes Green color easily identifiable after drywall install Eliminated need for caulking or sealants Complies with IECC and LEED...

Southwire® Switch Box, Number of Gangs: 2, Dimensions: 2-1/8 in, Galvanized

Southwire® Switch Box, Cable Entry: Knockout, Number of Knockouts: 12, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 30.3 cu-in, Dimensions: 4 in H x 2-1/8 in D, Steel, Silver, Galvanized Raised ground Drawn design for exposed surface-mount applications