ABS TRAP ADAPTER 1-1/4X1-1/4IN

ABS TRAP ADAPTER 1-1/2X1-1/2IN

The NDS Spee-D® channel systems are lightweight and easy to install and provide a quick and simple alternative to traditional concrete channels. For residential and non-residential applications, the Spee-D® channel has a greater surface area for drainage than the micro and mini channels. Effective...

The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems. Measures 4 in Can also be used with plastic...

outdoor wall faucets designed to prevent freezing pipes and water damage by separating cold weather from the water supply. Arrowhead wall hydrants are available with various inlet connections and features. Provides frost-proof protection when hose is removed Does not include back-flow protection, making it...

Anderson Metals Pipe Nipple, Nominal Size: 1 in, NPT Connection, 630 psi, Operating Temperature: 200 deg F, Brass, 2-1/2 in L, Suitable for: Brass, Copper and Iron Pipes

TEE FLARE BRASS 1/4 IN

Canplas Reducing Combination Tee Pipe Wye, Nominal Size: 3 x 3 x 1-1/2 in, Hub Connection, Schedule Rating: SCH 40, PVC, White

Anderson Metals Pipe Union, Nominal Size: 5/8 in, Compression Connection, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing

ABS REDUCING WYE 4X4X3IN

The ProSource pipe couplings connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Measures 4 in Easy installation

Brass fire hydrant adapter, converts thread type and size.

Lasco Reducing Bushing, Nominal Size: 1 x 3/4 in, MIP x Female Connection, Schedule Rating: SCH 80, PVC, 1-1/8 in L

A threaded bushings threads into an FPT fitting and connects to a smaller size MPT fitting.

The SharkBite® PEX barb coupling is made of a lead-free DZR brass and is an easy to install, low-cost solution to connect to PEX tubing. The SharkBite® PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be...

UPC individually bagged.

The ProSource pipe couplings connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Measures 2 in Easy installation

For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.

Watts® quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts® quick-connect design allows for quick and easy connections without the use of installation tools.

Elkhart Products 102 Pipe Union, Nominal Size: 1-1/2 in, Sweat Connection, Copper, 2.38 in L

The ProSource can be use to extend, alter or repair drain pipes. It can be used for installation of condensate lines on air conditioners. Not for use in potable water applications. Measures 3/4 x 3/4 in Easy installation

UPC individually bagged.

FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. Higher pressure ratings

Shallow well jet pumps are single-stage domestic water pumps designed for pumping portable water in applications where the water is located less than 25 ft vertically from the pump. A pressure switch is a standard feature. The shallow well pump can be mounted to...

The ProJet™ SN Series provides excellent performance with strong pressure for wells to 25 ft deep. Quality construction - close-grained cast iron body, drain port provided for easy winterizing Precision-molded diffuser - pump primes faster, handles more air, with multi-port, precision-molded, reinforced polypropylene diffuser...

Rectorseal T Plus 2® pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe....

SharkBite® male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting...

Anderson Metals Reducing Pipe Bushing, Nominal Size: 3/4 x 3/8 in, Male x Female Thread Connection, 150 psi, Operating Temperature: 120 deg F, Nylon, 1 in L

1/3 hp split capacitor motor, high efficiency, low Amp draw, corrosion-resistant plastic, 10 ft grounded water proof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating...

ABS-DWV ELBOW 22-1/2DEG 1-1/2

Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Rugged cast iron construction. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 10 ft...

Lasco Pipe Tee, Nominal Size: 1-1/4 in, FIP Connection, Schedule Rating: SCH 80, PVC

Lasco Pipe Tee, Nominal Size: 1-1/2 in, FIP Connection, Schedule Rating: SCH 80, PVC

Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible, can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV stabilized for outdoor use. Textured surface can be painted, wallpapered or...

UPC individually bagged.

For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF...

Features a full-size 9/16 in band and housing width that allows 12-1/2% more sealing area over conventional 1/2 in bands. One-piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to...

ABS-DWV ELBOW STREET 1-1/2IN

STOP VALVE GROUND KEY 3/4

The ProSource torque wrench tightens steel bands to 60 in-lb of torque. It automatically releases once correct torque has been achieved. Chrome Ratchet mechanism

ABS-DWV ELBOW STREET 3IN

The ProSource hose clamps are Multi- purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing and a...

ProSource Washer Hose Connector, PVC/Stainless Steel, Gray, Gray, Suitable for: 1-1/2 in and 2 in Standpipes and 1 to 1-7/16 in, Includes: Hose Clamp The connector ensures a secure connection between clothes washer drain hoses and standpipes The connector fits both 1-1/2 in and...

Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. For heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Produces up to 71 psi with automatic shut-off. Cast...

The ProSource pipe couplings connects 1-1/4 in or 1-1/2 in common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Measures 2 x 1-1/2 or 1-1/4 in Easy installation

ADAPTER POLY 3/8PX1/2MPT

Anderson Metals Reducing Pipe Coupling, Nominal Size: 1/2 x 3/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass

The ProSource pipe couplings connects 1-1/4 in or 1-1/2 in common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Measures 1-1/4 x 1-1/2 in Easy installation

Push-to-connect PEX fitting for faster installation compared to traditional PEX rough-in plumbing methods. Requires no special tools, crimp/clamp/PEX rings, increasing productivity. Securely and permanently connect two pieces of PEX pipe together. Can be rotated after connected and is ideal for working in tight spaces....

SharkBite® EvoPEX fittings are for use in hot and cold domestic water systems, as well as radiant heating/cooling systems. SharkBite® EvoPEX fittings are intended to be installed with SharkBite® PEX pipe as a holistic system. Instant push-to-connect ends for quick installation, immediate testing and...