Barb x male pipe. One-piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed...

Inserts into threaded fitting socket to reduce to smaller threaded opening. PTFE thread tape is recommended for threaded joints.

one-piece construction. Use with brass or steel pipe. All pipe threads are ""American Standard Taper Pipe Threads"". Fair vibration resistance. Used in low to medium pressure applications. Teflon™ tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight....

Nibco Pipe Elbow, Nominal Size: 1 in, Angle: 90 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC

Each foot of No-Burst contains 250 ft of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency IAPMO standard, PS74-95, CSA, SBCCI,...

Abbott Rubber Mill Discharge Hose, Camlock Connection, 100 psi, Rubber, 50 ft L, Includes: Aluminum C and E Nipple

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger...

The arrowhead brass 455LF Series standard frost-proof hydrants have a 1/2 and 3/4 in MIP inlet. The 455LF Series includes arrowhead Brass's exclusive O-ring bonnet and stem design (no packaging nut to tighten) and a 3 years limited warranty. Made from a heavy-duty, lead-free...

One piece construction. Used with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger...

Anderson Metals Tube Elbow, 3/8 in Nominal, 90 deg Angle, 200 psi Pressure, Brass

Genova Pipe Adapter, Nominal Size: 1-1/2 x 1-1/4 in, Spigot x MIP Connection, Schedule Rating: SCH 40, PVC

CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.

The ProSource hose clamps are Multi- purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing and a...

Anderson Metals Tube Elbow, Nominal Size: 1/2 in, Flare x Male Connection, Angle: 90 deg, 750 psi, Operating Temperature: -65 to 250 deg F, Brass

A threaded bushings threads into an FPT fitting and connects to a smaller size MPT fitting.

Anderson Metals Splicer, Nominal Size: 1/4 in, Barb Connection, 150 psi, Temperature Rating: 120 deg F, Nylon

DRAIN SLEEVE 4X100FT

Anderson Metals Reducing Tube Elbow, Nominal Size: 3/8 x 1/4 in, Flare x Male Connection, Angle: 90 deg, 1000 psi, Operating Temperature: -65 to 250 deg F, Brass

Canplas Long Sweep Elbow, Nominal Size: 4 in, Hub Connection, Angle: 90 deg, ABS, Black

ProBite's lead-free quarter turn straight push connect™ ball valve connect to copper, CPVC and PEX tubing without the use of glues, clamping or other plumbing tools. With only your hands you can connect our ball valves in a matter of seconds. The 1/2 in...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.

Arrowhead Brass Hose Bibb, 1/2 x 3/4 in Connection, FIP x Male Hose Thread Connection, 125 psi, Temperature Rating: 180 deg F, Body Material: Bronze Alloy, Includes: Exclusive O-Ring Bonnet, Stem Design

Richmond Water Heater, BTU Rating: 38,000 Btu, Gas Type: Natural Gas, Tank Capacity: 50 gal, Tall, 61-1/4 x 20-1/2 in

UPC individually bagged.

B & K Pipe Nipple, Nominal Size: 3 in, Threaded Connection, Schedule Rating: SCH 40, Steel, 6 in L

Quick R Pipe Insulation, 1-1/8 in ID x 2-5/8 in OD Diameter, 6 ft Length, 3/4 in Thickness, Polyolefin, Charcoal, 1 in Copper, 3/4 in IPS PVC, 1-1/8 in Tubing Pipe, Closure: two self-seal strips

Canplas Reducing Sanitary Pipe Tee, Nominal Size: 2 x 1-1/2 in, Hub Connection, ABS, Black

Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25 ft deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles...

For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting. Durable pans will not rust, corrode or crack Pre-cut side opening for drain fitting Drain...

IPEX Double Pipe Wye, Nominal Size: 2 in, Hub Connection, Schedule Rating: SCH 40, PVC, White

For hot or cold water in-line valve with PEX connections on both ends. Bar coded. This is a directional shut-off valve The arrow on the side needs to point with the flow of water

Lasco Pipe Nipple, Nominal Size: 1/2 in, Schedule Rating: SCH 80, PVC, 36 in L

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Alternative to copper plumbing pipe because of the lower cost,...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

Barb x male pipe. One-piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID. Barbed...

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron and tubular drain waste and vent systems. Allows you to make pipe connections...

Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps. Non-marking abrasion-resistant cover

Wilmar Strap Wrench Set, Rubber, Number of Pieces: 2 Durable non-slip rubber strap for industrial strength and added grip Flexible strap fits any shape and works easily in confined areas Two-tone color handle with PVC coating for extra control Fits items from 3/8 to...

The brass drain grate with PVC collar presents a stylish look as it drains light flows from small lawns, landscaped areas, patios and walkways. The rust and corrosion-resistant drain grate, also known as a drain cover, is fitted on a polyvinyl chloride collar that...

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology....

Pipe Insulation, 7/8 in ID x 1-5/8 in OD Diameter, 6 ft Length, 3/8 in Thickness, Polyethylene, Black, closure: semi-slit

Anderson Metals Pipe Elbow, Nominal Size: 1/4 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 18 in L, Suitable for: Water Heaters

1/2 in MPT and PEX connection. Easy quarter turn operation. IAPMO ANSI/NSF-61 approved. Maximum 125 psi working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4 in hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with...

Boshart Pipe Adapter, Nominal Size: 3/4 x 1 in, MPT x Insert Connection, Polyethylene, Gray

Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.

Anderson Metals Pipe Union, Nominal Size: 3/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Red Brass

High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household...

Anderson Metals Tube Union Elbow, Nominal Size: 5/8 in, Compression Connection, Angle: 90 deg, 150 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Copper and Plastic Tubing

Elkhart Products 103 Pipe Adapter, Nominal Size: 2 in, Sweat x FNPT Connection, Copper