Canplas Pipe Elbow, Nominal Size: 1-1/2 in, Hub Connection, Angle: 60 deg, PVC, White

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.

Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron and tubular drain waste and vent systems. Allows you to make pipe connections...

Streamline® copper pipe sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper pipe products to support most all plumbing supply and DWV applications, Streamline® copper pipe is available in all common types including K-type, L-type,...

Anderson Metals Pipe Nipple, Nominal Size: 1/8 in, NPT Connection, Brass, 1-1/2 in L, Suitable for: Brass and Steel Pipes

Canplas Pipe Coupling, Nominal Size: 2 in, Hub Connection, Schedule Rating: SCH 40, ABS, Black

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rustproof and maintenance-free, lightweight and easy to install. 9 in structural foam polyolefin dome atrium grate with UV inhibitor Use...

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Anderson Metals Pipe Coupling, Nominal Size: 1/4 in, FIPT Connection, Brass

Allows water to be diverted and released to water safe areas away from structures, erosion prone landscapes and poor drainage areas. The special patented design allows the emitter to open with a negligible amount of pressure.

three-piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy-to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.

Anderson Metals Pipe Nipple, Nominal Size: 1/2 in, MPT Connection, 150 psi, Operating Temperature: 120 deg F, Nylon, 1 in L, Suitable for: Plastic Tubing or Rubber Hose

SharkBite Pipe Elbow, Nominal Size: 3/4 in, Barb Connection, Angle: 90 deg, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Brass Made from lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless steel clamps Minimum working temperature...

The SharkBite® PEX barb reducing elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The reducing elbow allows you to reduce pipe size with a single fitting. The SharkBite®...

UPC individually bagged.

Canplas Pipe Cap, Nominal Size: 3 in, Hub Connection, Schedule Rating: SCH 40, ABS, Black

125 psi steam WSP. 200 psi water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. Rising stem for positive open and close operation Large flow area Heavy six-point cast iron handle

NDS Pop-Up Drain Emitter with Elbow and UV Inhibitor, Polyethylene, Suitable for: 3 and 4 in Hub Sewer and Drain Fittings This pop-up emitter with elbow allows water to be diverted and released to water safe areas away from structures, erosion-prone landscapes and poor...

Anderson Metals Pipe Connector, Nominal Size: 1/4 x 1/8 in, Compression x Female Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing

The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 3/4 in L. Made of stainless steel Handle made of zinc plated steel

Make a 90 deg connection with PEX pipe. Transitions from PEX to an NPT threaded connection. Certified for use in potable water and hydronic heating systems. Made from lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless steel clamps Minimum...

SharkBite Pipe Elbow, Nominal Size: 1/2 in, Barb Connection, Angle: 90 deg, 80 to 160 psi, Operating Temperature: 33 to 200 deg F, Brass Made from lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless steel clamps Minimum working temperature...

FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Use as flexible drain line

SharkBite® PEX barb drop ear elbows are used to transition from PEX, to NPT threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud...

Designed to prevent water line freeze up. Ready-to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation. Pipe heating cable designed to prevent water line freeze-up Ready-to install Grounded cord and...

The Nibco® lead-free bronze solder pressure 90 deg vent elbow is used in residential and commercial plumbing applications. Dezincification-resistant

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Anderson Metals Pipe Nipple, Nominal Size: 1/8 in, MPT Connection, 1000 psi, Brass, 1 in L

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

Anderson Metals Pipe Coupling, Nominal Size: 3/8 in, FIPT Connection, Brass

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

Canplas Pipe Adapter, Nominal Size: 4 in, MNPT x Hub Connection, Schedule Rating: SCH 40, ABS, Black

PIPE STRAP COPPER 1/2 IN

Anderson Metals Tube Elbow, Nominal Size: 3/8 in, Flare x Female Connection, Angle: 90 deg, 1000 psi, Operating Temperature: -65 to 250 deg F, Brass

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

Canplas P-Trap, Nominal Size: 3 in, Hub Connection, ABS, Black

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

PIPE STRAP COPPER 3/4 IN

The Milwaukee® large diameter plastic cutter wheel is designed for cutting PVC, CPVC, ABS and PEX with Milwaukee® quick adjust cutters (48-22-4253 and 48-22-4254). Delivers a straight, clean cut. Constructed with high carbon steel for long life. Use with the 48-22-4253 to cut up...

Nibco Pipe Adapter, Nominal Size: 1/2 in, Sweat x MIP Connection, Copper

The Milwaukee® 1-5/8 in ratcheting pipe cutter is engineered for straight, easy cuts. The piece point blade is designed to accurately pierce without crushing or cracking the pipe. The blade is constructed with stainless steel for long life and a durable cutting edge. Ergonomic...

The Milwaukee 1 in mini copper tubing cutter is designed to be the most durable mini cutter on the market. Featuring a proprietary adjustment mechanism, Milwaukee mini tubing cutters are engineered for 5X longer life. For added durability and extended performance, chrome rollers provide...

The Milwaukee® 3-1/2 in quick adjust copper tubing cutter is engineered for straighter, cleaner cuts. A four roller design delivers accurate cuts and prevents walking. The quick adjustment mechanism allows fast change between sizes and quick reset for the next cut. For added durability...

The Milwaukee 2-1/2 in basin wrench is designed for the industry's easiest basin swap-out's. The Milwaukee basin wrench features an ergonomic handle, designed to fit in the palm for maximum efficiency and comfort. A new-to-world ratchet ready and screwdriver ready handle allows for maximum...