Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig. Plastic mechanical plugs are premium plugs designed to hold higher pressures

Medium bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district (SCAQMD) 1168/316A or BAAQMD Method 40 and various...

Heavy bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in Dia with interference fit. 1-step, fast curing cement designed for cut-in applications where limited time is available for down-time. Low VOC solvent cement meets...

Heavy bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in Dia with interference fit. 1-step, fast curing cement designed for cut-in applications where limited time is available for down-time. Low VOC solvent cement meets...

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, NPT Connection, Brass, 1-1/2 in L, Suitable for: Brass and Steel Pipes

SharkBite® female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required. Instant push-fit connection for...

The ProSource hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing, and a...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Features heavy pattern rough brass, 1-piece O-ring bonnet, Uses 5/16 square key not included.

Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged.

Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term...

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Used to attach CSST to both the beginning and end of a run At least two fittings needed per installation No special tools or sealant required Patented...

Canplas Double Sanitary Cross, Nominal Size: 4 in, Hub Connection, ABS, Black

ECO 11 can be used for multiple or single applications depending on your climate. ECO 11 can provide hot water for one shower in colder climates or two showers in warmer climates. Use the Ecosmart™ interactive sizing guide to find out if this model...

The ECO 27 is one of the most powerful models from our full line of tankless water heaters, with the capacity to handle a large single-family home and has the capacity to deliver endless hot water for multiple fixtures, even in colder climates. In...

5/8 in OD (1/2 in nominal, copper) x 7/16 in OD. 1/2 in OD rubber slip joint. Lead-free

Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing.

UPC individually bagged.

Arrowhead Brass Straight Hose Bibb, 3/4 in Connection, MIP x Male Hose Thread Connection, 125 psi, Temperature Rating: 180 deg F, Body Material: Bronze Alloy, Includes: Exclusive O-Ring Bonnet, Stem Design

Medium bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6 in Dia in non-pressure transition joints. Recommended application temperature is 40 to 110 deg F. Meets ASTM D-3138. ABS...

Canplas Swivel Tray Plug, Nominal Size: 1-1/2 in, Spigot x FNPT Connection, Schedule Rating: SCH 40, ABS, Black

Canplas Reducing Pipe Coupling, Nominal Size: 2 x 1-1/2 in, Hub Connection, Schedule Rating: 40, ABS, Black

Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Alternative to copper plumbing pipe because of the lower cost, faster...

Use with pipe and connecting fittings where a drain basin is not needed or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe or PVC pipe. Dual wall, SDR 35, 2729 S&D.

UPC individually bagged.

UPC individually bagged.

Chrome. Lead-free

1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection. Keeps water from returning to sump basin Reduces noise For use with 1-1/4 in or 1-1/2 in OD pipe Item has threaded male end 1-1/2 in and outflow shoulder end 1 -1/4...

Tundra Pipe Insulation, 1-5/8 in ID x 2-5/8 in OD Diameter, 6 ft Length, 1/2 in Thickness, Polyolefin, Charcoal, 1-1/2 in Copper, 1-1/4 in IPS PVC, 1-5/8 in Tubing Pipe

Anderson Metals Tube Adapter, Nominal Size: 1/4 x 3/8 in, Compression Connection, 300 psi, Brass

The Richmond® Essential® 20-gal Electric point-of-use Water Heater comes with a 2 years In Home Labor Warranty and has a compact design that can provide an adequate supply of hot water for a single application. The heater includes a 2000 W element and a...

Smith-Cooper Pipe Cap, Nominal Size: 3 in, Threaded Connection, 300 psi, Malleable Iron, 1.8 in L

Quick R Pipe Insulation, 2-1/8 in ID x 2-7/8 in OD Diameter, 6 ft Length, 3/8 in Thickness, Polyethylene, 2 in Copper, 1-1/2 in IPS PVC, 2-1/8 in AC Tubing Pipe

This quick-connect male elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPT fitting rotates fully under pressure, connects to multiple...

125 psi steam WSP. 200 psi water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. Rising stem for positive open and close operation Large flow area Heavy six point cast iron handle

Connect pieces of different sized PEX pipe together. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems. Made from lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless steel clamps Minimum working temperature...

The SharkBite® PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system...

SharkBite® clamp rings are intended for use in a PEX system using barb fittings. These rings are tightened down using a PEX clamp tool. Our clamp tool works with any sized clamp rings up to 1 in. Brass inserts with pure copper fastening rings...

The SharkBite® PEX barb sweat female adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system...

The SharkBite® PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite® PEX barb fittings can be used in both a stainless steel clamp system...

Connect PEX pipe to a male threaded connection at a 90 deg angle. Compatible with crimp or clamp rings. Certified for use in potable water and hydronic heating systems. Made from lead-free DZR ecobrass Connects to PEX pipe with copper crimp rings or stainless...

The SharkBite® PEX barb sweat male adapter is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. These fittings allow you to connect with either a stainless steel clamp system or a copper crimp ring system...

The SharkBite® PEX swivel adapter is an easy-to-install solution to connect PEX tubing to a male threaded connection. These fittings are suitable for potable water distribution and hydronic heating applications. SharkBite® PEX barb fittings can be used in both a stainless steel clamp system...

Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature is 200 deg F. Factory pre-charged to 38 psi....

Charlotte Pipe Pipe, Nominal Size: 1 in, 1.315 in Dia Outside, Wall Thickness: 0.133 in, 5 ft L, 450 psi, Schedule Rating: SCH 40, PVC, White

Charlotte Pipe Pipe, Nominal Size: 1/2 in, 0.84 in Dia Outside, Wall Thickness: 0.109 in, 5 ft L, 600 psi, Schedule Rating: SCH 40, PVC, White

Charlotte Pipe Solid Pipe, 1-1/4 in Nominal, 5 ft Length, Plain End Connection, 370 psi Pressure, SCH 40 Schedule, PVC

Charlotte Pipe Pipe, Nominal Size: 3/4 in, 1.05 in Dia Outside, Wall Thickness: 0.113 in, 5 ft L, 480 psi, Schedule Rating: SCH 40, PVC, White

Charlotte Pipe Pipe, Nominal Size: 1/2 in, 2 ft L, 600 psi, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White