Legend T-4305NL Pipe Coupling, Nominal Size: 1 in, Tube Compression CTS x FIP Connection, 100 psi, Maximum Temperature: 100 deg F, Bronze

Legend T-4321NL Tube Pipe Union, Nominal Size: 3/4 in, IPS Connection, 100 psi, Operating Temperature: 100 deg F, 4.4 in L

Legend T-4411NL Pipe Elbow, Nominal Size: 3/4 in, Pack Joint Connection, Angle: 90 deg, 100 psi, Operating Temperature: 100 deg F, Bronze

Anderson Metals Elbow, Nominal Size: 3/4 in, MIP x CTS Connection, Angle: 90 deg, Bronze, Suitable for: Copper Tubing

Legend T-4320NL Pipe Coupling, Nominal Size: 3/4 in, Pack Joint x MNPT Connection, 100 psi, Maximum Temperature: 100 deg F, Bronze

Legend T-4413NL Pipe Elbow, Nominal Size: 3/4 in, Angle: 90 deg, 100 psi, Operating Temperature: 100 deg F, Brass

Fluidmaster access panels install quickly and easily cover up plumbing, electrical wiring and audio/visual cables. Easy to install No framing required Works in walls and ceilings up to 3/4 in thick Pops in and out of position, no visible clamps or screws

Legend T-4441NL Pipe Tee, Nominal Size: 3/4 in, Pack Joint Connection, 100 psi, Operating Temperature: 100 deg F, Bronze

1/2 x 3/8 in compression. Connects 1/2 in PEX or polybutylene and 3/8 in compression. No special tools required. This is a directional shut-off valve The arrow on the side needs to point with the flow of water For use on flexible supply lines...

VALVE BOX RCT W/LID JM 13X20IN

PIPE CAP ABS BLK SCH40 1-1/2IN

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. 40 psi). This switch is to be used with submersible well pumps or as a replacement switch....

The 2 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

Eco-Flo Submersible Sump Pump, 1/2 hp, 4080 gph, Maximum Lift Head: 32 ft, Inlet Connection Size: 1-1/2 in, Outlet Connection Size: 1-1/4 in, 115 V, 6 A, Frequency Rating: 60 Hz, Number of Phases: 1, Cord Length: 10 ft, Temperature Rating: 40 to 104...

Water Source Yard Hydrant, 1 in Inlet, FPT Inlet, 120 psi Pressure, Iron Head, Blue

INSERT COUPLING BRASS 3/4IN

Water Source Check Valve, 1 in Nominal, NPT Connection, Media: Gas, Oil, Water, 1.9 in Length, 1.7 in Width, 3.2 in Height, Brass Body, 200 psi Pressure

The 2 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

Water Source Yard Hydrant Repair Kit, Includes: Head Set Screw, Packing Nut, Plunger Insert and Packing Plunger

The 1/4 in air valve provides method of injecting and holding air pressure in galvanized water systems. It is easy to install.

Eco-Flo Submersible Utility Pump, Outlet Connection Size: 1-1/4 in, 1800 gph, 115 V, 2.3 A, Frequency Rating: 60 Hz, 1/4 hp, Suction Lift: 21-1/2 ft, Cord Size: 10 ft, Temperature Rating: 32 to 104 deg F, Thermoplastic, Dimensions: 8.5 in L x 6.1 in...

The pressure gauge measures water pressure in the pressure tank. It has a 1/4 in lower connection. Dark numbers are easy to read on the gauge.

The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.

The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back....

Eco-Flo Sump Pump, 1/3 hp, 3600 gph, Maximum Lift Head: 25 ft, 115 V, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing Material: Aluminum, Includes: 1-1/2 in MNPT x 1-1/4 in FNPT Adaptor Built-in overload motor protection Wide angle switch operates in basins 18...

Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC

Eco-Flo PUP Drill Pump with Kit, 300 gph, Housing Material: Thermoplastic, Suitable for: 1/4 or 1/2 in Drill, Includes: 3 ft Garden Hose, 1/4 in Hose Corrosion-resistant thermoplastic construction Inlet or outlet clearly marked and designed for use with garden hose

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Foot Valve, 1-1/4 in Connection, 200 psi Pressure, Brass Body, Includes: #8 Perforated Brass Screen Strainer

The 1 in male adapter with the rope loop connects flexible poly pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 3/4 in barbed x 3/4 in male NPT x 3/4 in barbed brass hydrant tee allows multiple flexible poly pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. The hydrant tee meets all federal low lead...

Eco-Flo Sump Pump, Outlet Connection Size: 1-1/2 in, 3160 gph, 115 V, 6.5 A, 1/3 hp, Maximum Head: 20 ft, Cord Size: 8 ft, Temperature Rating: 104 deg F, Cast Iron/Thermoplastic, Dimensions: 11-1/2 in L x 8-1/2 in W x 9-3/4 in H heavy-duty...

Eco-Flo Condensate Pump, 115 V, 1.5 A, 1/40 hp, 100 gph, Outlet Connection Size: 3/8 in, Discharge Head: 18 ft, 7 in OAH, 11 in OAL, 4-3/4 in OAW, Includes: Built-in Check Valve, Wall Mounts Safety switch to automatically shut down equipment in case...

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. This hydrant tee meets federal low lead regulations.

Eco-Flo Pitcher Pump Kit, Leather, Includes: Flat Leather Valve and Leather Cup

The 1-1/4 in two hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. 1/8 in female tapping for an air valve...

Eco-Flo Well Point, MPT Connection, Pipe Size: 2 x 36 in, Dimensions: 3-1/2 in Dia 80 GZ stainless steel mesh screen 30 in screen 80 mesh

Eco-Flo Submersible Utility Pump, 1980 gph, 115 V, 1/4 hp, Suction Lift: 25 ft, Cord Size: 10 ft, Temperature Rating: 40 to 104 deg F, Thermoplastic, Dimensions: 6.4 in L x 6.4 in W x 10.2 in H Manual operation Will drain from flat...

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pressure mark (e.g. 50 psi). If the pressure drops rapidly, the switch will automatically shut-off the pump....

Water Source Check Valve, 1-1/4 in Nominal, Brass Body, 200 psi Pressure, 180 deg F, Suitable for: Jet, Submersible and Centrifugal Pumps

Water Source Check Valve, 3/4 in Nominal, Media: Gas, Oil, Water, 2-3/4 in Length, 1-1/2 in Width, 1-1/2 in Height, Brass Body, 200 psi Pressure

Eco-Flo Submersible Utility Pump Kit, 1980 gph, 115 V, 3.3 A, 1/4 hp, Number of Phases: 1, Maximum Head: 25 ft, Cord Size: 10 ft, Temperature Rating: 32 to 104 deg F, Thermoplastic, Dimensions: 13 in L x 13 in W x 10-1/2 in...

Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings The submersible cable guard prevents submersible power cables from rubbing in a well casing, cable guard is constructed of durable plastic material Easy-to-use, snap-in wire guide The cable guard is constructed of...

Eco-Flo Sump Pump Check Valve, 1-1/2 x 1-1/4 or 1-1/2 in Connection, MPT x Barb or Spigot Connection, Body Material: Plastic Prevents back flow of water into sump pit

Water Source Pressure Switch, 115/230 V, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Steel Body, Gray, 40, 60 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Foot Valve, 1 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

The air volume control maintains balance of air volume in galvanized water tanks when using submersible pumps. It replenishes air in galvanized pressure tanks. It is used with submersible pumps.

The pitcher pump is made with cast iron for optimum strength. It has a rugged design for a long service life. This pump has a maximum lift of 25 ft. No lead Pitcher spout designed to hold pail for easy operation

Eco-Flo Sump Pump, 0.5 hp, 4400 gph, Outlet Connection Size: 1-1/2 in, 115 V, 8 A, Frequency Rating: 60 Hz, Cord Length: 10 ft, Temperature Rating: 40 to 104 deg F, Housing Material: Cast Iron construction & Thermoplastic Impeller, Additional Information: 11 in L...

The 1/8 in air valve provides method of injecting and holding air pressure in galvanized water systems. It is easy to install.