Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

SUMP DISCHARGE HOSE KT 1-1/2IN

Eco-Flo SUP Submersible Utility Pump, Inlet Connection Size: 3/8 in, Outlet Connection Size: 1-1/4 in, 3180 gph, 115 V, 3.3 A, Frequency Rating: 60 Hz, 1/2 hp, Suction Lift: 27 ft, Cord Size: 10 ft, Thermoplastic, Dimensions: 6.1 in L x 6.1 in W...

Eco-Flo Sewage Pump, Outlet Connection Size: 2 in, 5700 gph, 115 V, 1/2 hp, Suction Lift: 18 ft, Cord Size: 20 ft, Cast Iron/Thermoplastic, Black, Dimensions: 11.2 in L x 9.8 in W x 18.9 in H, Includes: Hardware, Power Cord Heavy-duty cast iron...

The 1 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Water Source Pool Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Measuring Range: 100 psi, Lens Material: Glass The pressure gauge measures water pressure in the pressure tank It has a 1/4 in lower connection Dark numbers are easy to read on the...

Eco-Flo Sump Pump, 1/2 hp, 5100 gph, Maximum Lift Head: 26 ft, Outlet Connection Size: 1-1/2 in, 115 V, Cord Length: 8 ft, Impeller Material: Cast Iron, Housing Material: Cast Iron Built-in thermal overload motor protection Vertical switch operates in basins 11 in Dia...

Water Source Flush Pipe Coupling, Nominal Size: 2 in, Slip Connection, Schedule Rating: SCH 40, PVC

Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi

Eco-Flo Pool Utility Pump, 115 V, 1/4 hp, 1980 gph, Thermoplastic, Dimensions: 9-1/4 in L x 14 in W x 13-1/2 in H Will drain from flat surfaces down to 1/8 in Continuous duty, efficient 115 V PSC motor for lower carbon footprint Oil...

Water Source Foot Valve, 1-1/2 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

Eco-Flo Deep Well Jet Pump, 1-1/4 in Suction, 1 in Discharge Connection, 115/230 V, 3/4 hp, 7 gpm, 56 psi, Iron, Suitable for: 20 ft Deep Water Well Built-in overload motor, well injector kit included (well injector casting, jet nozzle, venturi tubes and hardware)...

Water Source Air Volume Control, Specifications: 3/8 in MPT Connection, Suitable for: 120 gal Water Tank

Eco-Flo ECD Submersible Sump Pump, Inlet Connection Size: 2 in, Outlet Connection Size: 1-1/2 in, 115 V, 8 A, Frequency Rating: 60 Hz, 3/4 hp, Maximum Head: 35 ft, Suction Lift: 6000 gph, Cord Size: 8 ft, Temperature Rating: 35 to 104 deg F,...

Eco-Flo Discharge Hose Kit, Polyethylene, Black, Suitable for: Sump Pumps, Includes: 24 ft Hose, 1-1/4 in MIP x 1-1/4 in Barbed Adapter, 1-1/2 in MIP x 1-1/4 in Barbed Adapter, Clamp

The pressure gauge measures water pressure in the pressure tank. It has a 1/8 in back connection. Dark numbers are easy to read on the gauge. Measures water pressure in well tank

The sump check valve prevents back flow to sump pumps. It fits both pedestal and submersible sump pumps with 1-1/4 in or 1-1/2 in discharge. Easy to install, this check valve is constructed of rubber.

Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body

The 1 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

Water Source Pressure Gauge, 3/4 in Connection, Female Connection, Measuring Range: 0 to 100 psi, Dial Size: 2 in, Lens Material: Glass, Socket Material: Brass, Suitable for: 3/4 in Male Hose

Eco-Flo Drill Pump, Drill Speed: 3500 rpm, 260 gph, Housing Material: Thermoplastic, Dimensions: 4.4 in L x 2.5 in W x 2.9 in H, Suitable for: Standard 1/4 in or 1/2 in Drill Corrosion-resistant thermoplastic construction Inlet or outlet clearly marked and designed for...

Water Source Coupling, Nominal Size: 1/2 in, Barb Insert Connection, Brass

Water Source Piggyback Float Switch, 115 V, Dimensions: 4 in L x 2.6 in W x 2.74 in H, Body Material: Rubber, Black, Suitable for: Pumps Working with 1/2 hp at 120 VAC and 1 hp at 230 VAC, Includes: Cable Tie

INSERT COUPLING BRASS 1IN

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

Eco-Flo Submersible Utility Pump, 115 V, 1/6 hp, 1680 gph, Maximum Head: 20 ft, Cord Length: 10 ft, 10.2 in OAH, 6.4 in OAL, 6.4 in OAW, Black, Thermoplastic Operation is manual Will drain from flat surfaces to 3/8 in Handles solids up to...

Eco-Flo PUP Lightweight Utility Pump, 115 V, 1/12 hp, 360 gph, Cord Length: 6 ft, 4 in OAH, 6.6 in OAL, 4.7 in OAW, Includes: 6 ft Hose Manual operation 115 V, thermal overload protected electric motor

Water Source Check Valve, 1-1/2 in Nominal, Media: Cold Water, Gas, Oil, Brass Body, 200 psi Pressure, Suitable for: Jet, Submersible and Centrifugal Pumps

The 3/4 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve. Solid brass design meets federal low-lead regulations

The 1-1/4 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Eco-Flo Vertical Float Replacement Switch, Body Material: Thermoplastic, Suitable for: Pedestal Pumps

The 1/2 in relief valve protects tank systems from pressure build-up. It is recommended for use on all submersible pumps or systems that build more than 75 psi. Solid brass design meets federal low-lead regulations Not for use with water heaters

The 3/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

PIPE CAP ABS BLK SCH40 4IN HUB

Eco-Flo Column Style Sump Pump, 1/3 hp, 3000 gph, 7.79 psi, Maximum Lift Head: 18 ft, Outlet Connection Size: 1-1/2 in, 115 V, 4 A, Number of Phases: 1, Cord Length: 8 ft, Temperature Rating: 40 to 104 deg F, Impeller Material: Thermoplastic, Housing...

The expandable torque arrestor protects submersible pumps from damage when the pump starts. It is made of heavy-duty rubber. This torque arrestor can adjust to fit 4 to 8 in well casings. Protects submersible pumps from damage when pump starts and stops Molded PVC...

Eco-Flo Sump Pump, Outlet Connection Size: 1-1/2 in, 3600 gph, 115 V, 3.5 A, Frequency Rating: 60 Hz, 1/3 hp, Suction Lift: 25 ft, Cord Size: 10 ft, Temperature Rating: 40 to 104 deg F, Aluminum/Thermoplastic, Dimensions: 9-5/8 in L x 9-5/8 in W...

The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and...

The 3/4 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

Eco-Flo Submersible Pump, 1-1/4 in Connection, FNPT Connection, 230 V, 3/4 hp, 12 gpm, Stainless Steel, Silver, Black Stainless steel pump shaft is precision ground for exact bearing fit and straightness Precision molded impellers and diffusers Stainless steel pump housing for maximum protection against...

The 1 in two-hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. Vertical or horizontal application prevents back flow to the...

The 1/2 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 10 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and a snifter valve. Solid brass design meets federal low-lead regulations

This sump or sewage check valve prevents back flow to sump or sewage pumps. It will fit 2 in discharge pipes. The flexible couplers allow for easy installation. Low cost investment to prevent costly pump replacement

NDS Drain Grate, Grate Opening Size: 1/4 in, Open Surface Area: 10.4 sq-in, Square, 5.88 in L, 2 in H, 5.88 in W, 6 in Dia, HDPE, Green, Foam, Working Pressure: 1 to 60 psi Fits 3 or 4 in sewer and drain pipe...

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rust-proof and maintenance-free, lightweight and easy to install. NDS has a full line of drainage products, fittings and accessories available....

P-TRAP HUB CONN ABS BLACK 2IN

ProBite's lead-free push connect™ stop end connectors are easy to install and easy to remove. Using Push Connect™ technology, our stop ends can be installed in seconds without the use of glues, calks and special plumbing tools. Great for pressure testing, central heating systems...