Canplas Sanitary Street Pipe Elbow, Nominal Size: 1-1/2 in, Spigot x Hub Connection, Angle: 90 deg, ABS, Black

Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the...

DrainTech Square Riser, Polyethylene, Dimensions: 12.1 in L x 12.1 in W x 7.1 in H

BrassCraft® 1/2 in Nom compression inlet x 1/2 in OD compression outlet 1/4-turn straight valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The straight valve is most often used where the water pipe enters the room from...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

Removes most faucet handles.

PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to...

IPEX Reducing Pipe Tee, 2 x 2 x 1-1/2 in Nominal, Slip x Slip x FPT Connection, 280 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

Used to aid in the installation of kitchen and bathroom faucets. Suitable for 1 in and 7/8 in hex nuts, 4 and 6 point water pipe joints. Internal dimensions of the wrench head are (from the inside out) 2.1 cm, 2.35 cm. and 2.8...

SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and white colors. SharkBite PEX is approved for crimp, clamp or push-to-connect...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 20 ft L, 220 psi, Schedule Rating: SCH 40, PVC

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3 in, 20 ft L, 260 psi, Schedule Rating: SCH 40, PVC

Charlotte Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 10 ft L, SDR 35, PVC, Green

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.

Canplas Reducing Pipe Bushing, Nominal Size: 3 x 2 in, Spigot x Hub Connection, ABS, Black

Canplas Adjustable P-Trap with Union, Nominal Size: 2 in, Hub Connection, ABS, Black

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.073 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC 3 in bell depth

Elkhart Products 111 Pipe Tee, Nominal Size: 2 in, Sweat Connection, Copper

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

SharkBite® female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required. Instant push-fit connection for...

The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Measures 1-1/2 in Can be used underground

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, NPT Connection, 890 psi, Operating Temperature: 200 deg F, Brass, 3-1/2 in L, Suitable for: Brass, Copper and Iron Pipes

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/4 in, 1.66 in Dia Outside, Wall Thickness: 0.064 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC 2-3/4 in bell depth

JM Eagle realizes the growing demand for an effective all-out attack on water pollution, highlighting the need for improved sanitary sewage collection systems. A modern system needs pipe with improved design for reserve strength and stiffness to increase load bearing capacity - all within...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVC

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 1.315 in Dia Outside, Wall Thickness: 0.063 in, 20 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC 2-1/2 in bell depth

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight....

Arrowhead Brass 355 Sillcock, 3/4 in Connection, FIP x Male Hose Threaded, Solid Flange Connection, 125 psi, Temperature Rating: 180 deg F, Body Material: Bronze Alloy, Includes: O-Ring Bonnet and Stem Design Made from heavy-duty lead-free bronze alloy

UPC individually bagged.

JM Eagle's makes PVC ASTM D3034 SDR 35 sewer pipe in 10 and 20 ft lengths, bell end, in 3, 4 and 6 in Dia and PVC ASTM D2729 drain pipe in 10 ft lengths, bell end, in 3, 4 and 6 in Dia....

Charlotte Pipe, Bell End, Nominal Size: 6 in, 6 in Dia Outside, 10 ft L, PVC, Green

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

Charlotte Pipe, Nominal Size: 4 in, 4-1/2 in Dia Outside, Wall Thickness: 0.237 in, 20 ft L, Operating Temperature: 32 to 140 deg F, Schedule Rating: SCH 40, PVC, White

Apollo PEX™ tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture....

Canplas Reducing Sanitary Tee, Nominal Size: 4 x 1-1/2 in, Hub Connection, Schedule Rating: SCH 40, PVC

Lasco Pipe Adapter, Nominal Size: 2 in, Slip x MIP Connection, Schedule Rating: SCH 80, PVC, 2-29/32 in L

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

PVC suction hose assembly for pump intake and agricultural applications.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 3/4 in GHT fitting rotates fully under pressure, connects to...

Canplas Sanitary Pipe Tee, Nominal Size: 4 in, Hub Connection, PVC, White

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.

One piece construction. Use with brass or steel pipe. All pipe threads are American Standard Taper Pipe Threads. Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger...

The SharkBite® push-to-connect faucet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2 in threaded connection on the other end. They are also easily...

The SharkBite® push-to-connect toilet connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 7/8 in ballcock thread on the other end. The fittings are available...

Anderson Metals Short Nut, Nominal Size: 5/8 in, Flare Connection, Flared Angle: 45 deg, 650 psi, Temperature Rating: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper, Steel Tubing

Anderson Metals Solid Pipe Plug, Nominal Size: 1/4 in, IPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Elkhart Products 101R Reducing Pipe Coupling with Stop, Nominal Size: 1 x 3/4 in, Sweat Connection