Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4...

Nylon ball bearing wheel; with adjustable aluminum housing bracket; bracket has "T" shaped extruded boss. Fits on: Contractors Mirror Door company. Contents: 1 roller assembly. Adjustable aluminum housing bracket Easy to install

Prime-Line Roller Assembly, 40 lb Weight, Number of Rollers: 1, Bearing Type: Ball, Roller Edge Type: Concave, Roller Width: 5/16 in, Roller Diameter: 1-1/2 in, Aluminum, Silver, Unfinished, Bottom Mounting, Dimensions: 1-3/4 in L x 1/2 in W x 3 in H, Suitable for:...

Single wheel; adjustable steel bracket; round edge nylon wheel; designed for steel frame bi-passing doors. Fits on: Cox. Contents: 2 roller assemblies, non-handed. Adjustable height and also acts as corner bracket

Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.

N 6611 is a spring-loaded 3/4 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 in...

N 6612 is a spring-loaded 1/4 in steel pivot pin in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top back edge of a bi-fold door. Easy to install

N 6614 is a spring-loaded 7/8 in Dia nylon roller guide in a steel nail down base. The base is 3/8 in with 2 nail down tabs on either side. It mounts on the top edge of a bi-fold door that is 1 to...

N 6624 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The tab on the back end of the housing allows...

N 6625 is a bottom mount roller assembly for mirrored wardrobe doors. Used on Crest Door and other mirror doors, the roller assembly installs up into the bottom of the metal framed mirror door. The tab on the back end of the housing allows...

N 6630 is a Paneled Mirror Door roller assembly with a concave nylon roller. Used on Monarch Mirror Doors "L" Series, the grooved ball bearing nylon roller provides a smooth ride as it slide back and forth. The flat nylon roller is 1-1/2 in...

Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others. Reduces binding at pivot

N 6655 is a set of steel floor guides with a nylon tip. Used in the past on Like Doors, it provides an alternative when the door thickness is larger than the ordinary or a heavy-duty floor guide is needed. The steel floor brackets...

N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed. Easy Installation

N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors. Provides a...

N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in...

N 6667 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the front door panel. The stamped steel bracket assembly is adjustable and has a 1/4 in offset. It fits 3/4 to 1-3/8...

N 6668 is a side mounted, top hung, adjustable wardrobe door roller assembly with a single 7/8 in convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 in offset. It fits 3/4 to 1-3/8...

N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door. No fasteners required Easy to install Spring-loaded nylon base...

N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment. Easy to install

N 6686 is a 1-3/16 in concave steel ball bearing roller assembly that installs into a 1/2 in deep by 2-15/16 in long mortised pocket on each end of the solid wood closet door bottom rail. The roller assembly is held in place by...

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment. Easy to install

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.

Plated steel, includes two brass nails for installation.

N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. No fasteners required Easy to install

N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a...

N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door. No fasteners required Easy to install Spring-loaded nylon base...

N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Commonly used by Kenna Frame as well as countless...

N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers. Spring-loaded plastic base...

N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers....

N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment. Easy to install

N 6707 is a bottom mount pivot used by Johnson Hardware and many other bi-fold door manufacturers. The 7/16 in Dia nylon base houses a 1/4 in pivot bolt with a unique star adjustment nut. Easy to install

Plastic base, steel track clip, installs into top track to accepts top pivot pin, fits Johnson in new style in hardware. Easy to install

Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws. Floor-mounted steel base nylon point insert accepts a 1/4 in Dia...

N 6714 is a floor mounted bottom pivot bracket. The nylon insert installs into the floor bracket of the Alliance duo-fold Series "500" door system. Adjustable when installed into the existing bracket

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of...

N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end....

N 6755 is a brass-plated bi-fold door pull knob. It is 1-3/4 in Dia and is used on hollow core or solid wood bi-fold door panels. Fits up to a 1-3/8 in thick door. Easy to install

N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to...

N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers. Easy to install Adjustable from 7/8...

N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. Easy to install

Plated steel, includes two brass nails for installation. Nail in design

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.

Brass plated die-cast pull. Pull retracts from flush position. Fits on a 5/8 x 3-1/2 in mortise, 3/4 in deep. Contents 1 pull, two #8 x 3/4 in Phillips flat head sheet metal screws. Easy installation

N 6770 is a solid brass pocket door pull with a polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. There is a hidden finger pull on the front edge of the pocket door pull. Fasteners included. Fits on the...

N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed....

N 6773 is a solid brass privacy lock and pull for a pocket door with an polished chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It can be reversed from left handed to right handed. Easy to install Fits on...

N 6790 is a stamped steel housing with a 1-7/16 in nylon roller attached used on Acme mirrored doors. The tabs on the side insert into a slot in the door frame and is locked in by the offset tabs installing into the same...

N 6794 is a set of machined hardwood closet pole sockets. They fit the standard 1-3/8 in closet pole. They have a natural finish and can be stained or painted if desired. There are two hardwood sockets and fasteners included in the package. Features...

N 6796 is a bi-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors....