N 6820 has an adjustable steel housing with a 1-7/16 in ball bearing roller installed. Used on charmed mirrored doors in the late 90's, the original designed housing is no longer available. In some cases, to make this part work the lower tabs may...

N 6823 is a stamped steel top pivot bracket. It fits into the Acme 5/8 in wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides...

Brass plated steel sliding door pull for pocket doors; fits a 7/8 x 2-1/2 in mortise. Contents 2 pulls, 4 nails or screws. It features a rectangular design It comes complete with fasteners for a quick and easy installation

N 6830 is an adjustable, side mounted, top hung closet door roller assembly with a 7/16 in offset and a 15/16 in convex nylon roller used on Excellent brand closet doors. It fits 3/4 in to 1-3/8 in thick doors. Originally used by Excellent...

N 6840 is an adjustable top hung, side mounted bracket with a 1/16 in offset and 7/8 in flat nylon roller used on the front sliding door panel. It fits 3/4 to 1-3/8 in thick doors. Adjustable top hung side mounted design

N 6841 is an adjustable top hung, side mounted bracket with a 3/8 in offset and 7/8 in flat nylon roller used on the back sliding door panel. It fits 3/4 to 1-3/8 in thick doors. Adjustable top hung side mounted design

Plated steel, universal design fits a 3/4 in Dia hole. Press-in design

N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod....

Plated steel, includes two brass nails for installation. Nail in design

N 6870 is a paneled mirror door roller assembly with a concave nylon roller. Used on contractor's mirror doors, the grooved nylon roller rides on a track. The concave nylon roller is 1-1/2 in Dia. Note that the adjusting screw is centered on the...

Plated steel, universal design fits a 3/4 in Dia hole.

1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H. Plastic wheel on spring-loaded steel shaft Self-adjusting for smooth guidance of lead...

Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W...

N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has...

N 7025 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges are a flag design. That is, that one hinge extends to the left while the other...

N 7050 is a set of white die-cast zinc closet pole sockets designed for heavy-duty situations. Fits the standard 1-3/8 in closet pole. The white die-cast finish gives an attractive and professional look. Easy to install. Set of 2 white die-cast sockets and fasteners...

N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This...

N 7079 is a solid brass pocket door pull and flush edge pull for a pocket door with a satin chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in...

N 7161 is a solid brass pocket door privacy lock and flush edge pull in a Satin Chrome Finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2...

Use to repair pivot point of bi-fold doors. Repairs split doors at the top or bottom pivot Cannot be seen once installed

Use to repair pivot point of bi-fold doors. Repairs split doors at the top or bottom pivot Cannot be seen once installed

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers. Easy-to-install

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers. Universal nail set design Easy to install

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.

Plated steel, includes two brass nails for installation. Easy installation Universal nail set design

Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.

Plated steel, includes two brass nails for installation. Easy installation

N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick. Easy to install Fits on the edge of the pocket door

N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2...

N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia steel housing. The 7/8 in horizontal roller on the guide provides...

N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia nylon housing. The 7/8 in horizontal roller on the guide provides...

N 7266 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 3/8 in Dia plastic housing. The 7/8 in horizontal roller on the guide provides...

Prime-Line Adjustable Bi-Fold Top and Bottom Pivot Set, Plastic/Steel, White, Dimensions: 3/8 in Dia x 1 in H, Suitable for: Bi-Fold Doors, Includes: Pivot and Guide Solid plastic tip guide and pivot Common on louvered wood doors Adjustable bottom pivot Used by many wardrobe...

N 7273 is a set of nickel-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed. Easy Installation

N 7274 is a satin nickel pocket door flush edge pull. It mounts onto the leading edge of a pocket door and has a pull that is pulled out from its flush position to pull the pocket door out of the wall. Afterwards, the...

Repair kit is for 3/8 in Dia holes. Fits 7/8 in wide top tracks. Kit includes most parts needed to repair one 2 door set. Repairs a 3/8 in Dia system Easy to install

N 7291 is a combination set of the top pivot and guide wheel used by several bi-fold door manufacturers. Typically used on wood bi-fold doors, the top pivot is a nail on style with a 1/4 in spring loaded pivot pin with a 3/8...

Prime-Line Door Pull, 5/16 in D, 2-1/8 in Dia, Mortise Mounting, Brass, Satin Nickel, Suitable for: 2-1/8 in Dia Hole Sliding Closet Doors, Includes: Hardwares Sliding closet door mortise pull

Prime-Line Door Pull, 3/4 in Dia, Brass, Satin Nickel, Suitable for: 3/4 in Dia Hole Sliding Closet Doors Easy installation Mounted by friction fit

N 7316 is a 3-Piece adjustable floor guide. Made of tan nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers. Adjustable from 7/8 to 1-3/8 in...

N 7331 is a drive-in ball bullet catch and strike. Brass-plated die-cast. 3/4 in by 1-3/16 in barrel with a steel ball, spring and strike. Designed to provide a spring-loaded latching system primarily used on swinging double doors. Concealed ball catch system

Prime-Line Door Pull, 1-3/8 in W, 3/8 in D, 3-1/4 in H, Mortise Mounting, Brass, Satin Nickel, Includes: Fasteners Mortise style handle

N 7367 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 3-3/4 in tall by 2-1/2 in deep. The thumb turn engages and disengages...

N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2...

N 7372 is a decorative satin nickel die-cast bi-fold door pull knob. It is 1-11/16 in Dia and is used wood or hollow core bi-fold door panels. The wide base prevents hollow door crush and the large diameter knob allows for easy gripping. Fasteners...

N 7385 is a decorative classic bronze finish die-cast bi-fold door pull knob. It is 1-11/16 in Dia and is used on hollow core or solid wood bi-fold door panels. It has a 15/16 in Dia base which prevents hollow door crush and the...

N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation...

Saw wax is a lubricant for use on semi high-speed saw blades. The regular application of this clinging grease film to the cutting tool serves as a heat reducing coolant on the cutting teeth and work surface. The anti-heating properties in the formulation work...

Prime-Line Rigid Screen Spline, Vinyl, Black, 0.125 in Dia, 80 ft L

Prime-Line Screen Frame Corner, Plastic, 6-1/4 in L, 7/16 in W, 4-1/2 in H, Suitable for: 3/4 x 7/16 in Screen Frame