-
Vendor: TAPCON
Tapcon 24192 Screw Anchor, 2 in L, Hex Drive, Steel, Metallic, 4 PK
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Great holding strength Corrosion resistance and long-lasting performance due to the innovative Climaseal blue...- $5.64
- $5.64
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S07300FB5 Deck Screw, #7 Thread, 3 in L, Coarse Thread, Trim Head, Square Drive, Type 17 Point, Steel
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia and mitered ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts....- $111.88
- $111.88
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 297139 Deck Screw, #8 Thread, 2 in L, Coarse Thread, Bugle Head, Star Drive, Sharp Point, Coated
Use for exterior deck and railing projects where rust resistance is important.- $84.41
- $84.41
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24310 Screw Anchor, 2-3/4 in L, Hex Drive, Steel, Climaseal, 75 PK, 3/16 in Drive
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower...- $23.97
- $23.97
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28307 Concrete Screw Anchor, T25 Screw, 3/16 in Dia, 3-1/4 in L, Steel, Climaseal
The next generation of Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the best when it comes to concrete anchoring. Engineered for a more stable drive with no bit slip Climaseal coating for corrosion...- $23.41
- $23.41
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors Lag Shield 242S Masonry Anchor, 220 lb, 1/4 in Screw, Zinc, 2/PK
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Zinc anchor with internal thread for lag bolt Installs flush to surface Lag screw shield is a corrosion-resistant masonry anchor with the best expansion- $6.94
- $6.94
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 448N Sleeve Anchor, 3/8 in Dia, 3 in L, 700 lb, Stainless Steel
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Pre-assembled, all-purpose medium-duty anchor One-step installation anchor Has six types of heads Anchor size is same as hole size Stainless steel makes...- $13.63
- $13.63
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 187R Screw Anchor, #6-8 Thread, 1 in L, Polyethylene, 100 lb, 30/PK
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted. Easy to install Can be...- $9.89
- $9.89
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10430 Screw, #8 Thread, Bugle Head, Phillips Drive, Zinc, Yellow
Midwest Fastener Screw, Multi-Use, #8 Thread, Bugle Head, Phillips Drive, Zinc, Yellow, 3 in Length Under Head- $5.49
- $5.49
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10429 Screw, #8 Thread, Bugle Head, Phillips Drive, Yellow, Zinc
Midwest Fastener Screw, Multi-Use, #8 Thread, Bugle Head, Phillips Drive, Zinc, Yellow, 2-1/2 in Length Under Head- $5.49
- $5.49
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10480 Screw, #8 Thread, 1-1/2 in L, Hex Drive, Self-Drilling Point, Steel, Zinc
Midwest Fastener Screw, Thread Size: #8, 1-1/2 in L, Drive Type: Hex, Point Type: Self-Drilling, Steel, Zinc- $9.99
- $9.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 385V Drive Nail-In Anchor, 1/4 in Dia, 1-1/2 in L, Die-Cast Zinc
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel...- $11.82
- $11.82
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0280138 Screw, #7 Thread, 2 in L, Fine Thread, Bugle Head, Phillips Drive, Sharp Point, Phosphate, 166/BX
Use for drywall to light-gauge steel studs. Fine threads provide good holding power- $7.31
- $7.31
- Unit price
- per
-
Vendor: TEKS
Teks 21380 Screw, #10 Thread, 1-7/16 in L, Coarse Thread, Flat Head, Phillips Drive, Self-Drilling, Self-Tapping Point
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring...- $14.66
- $14.66
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW3W250 Screw, White, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $48.80
- $48.80
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05597 Lag Screw, 1/2-6 Thread, 4-1/2 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 1/2-6, 4-1/2 in OAL- $50.99
- $50.99
- Unit price
- per
-
Vendor: TEKS
Teks 21504 Lath Screw, #8 Thread, Truss Head, Phillips Drive, Sharp Point, Steel, Zinc, 200 PK
Teks® Fasteners are the leading choice of self-tapping screws for use in interior or exterior applications. Professionals are able to drill faster with less force even in heavy gauge metal. The self-tapping threads are designed to tap holes while providing superior holding power ensuring...- $14.23
- $14.23
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15MT250 Screw, #9 Thread, Mocha Tan, Hex Drive, Self-Tapping, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 620T Screw, 3/16 in Thread, 1-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 100 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $58.14
- $58.14
- Unit price
- per
-
Vendor: TEKS
Teks 21536 Lath Screw, #8 Thread, Truss Head, Phillips Drive, Drill Point, Steel, Zinc, 120 PK
Teks® Fasteners are the leading choice of self-tapping screws for use in interior or exterior applications. Professionals are able to drill faster with less force even in heavy gauge metal. The self-tapping threads are designed to tap holes while providing superior holding power ensuring...- $14.97
- $14.97
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15CR250 Screw, #9 Thread, High-Low, Twin Lead Thread, Crimson, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15FG250 Screw, High-Low, Twin Lead Thread, Hex Drive, Forest Green, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15G250 Screw, #9 Thread, High-Low, Twin Lead Thread, Self-Tapping, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated C1022 steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface...- $25.40
- $25.40
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 082Y Spring Toggle Bolt, 3 in L, Steel, 68 lb, 4/PK
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open...- $7.53
- $7.53
- Unit price
- per
-
Vendor: SENCO
SENCO 06A162PB Collated Drywall Screw, #2 Drive, Sharp Point, Bugle Head, 1-5/8 in L
50 screws per flat strip. Gray phosphate finish. For drywall to wood. Compatible with DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662). Phillips recess provides smooth engagement with moderate torque transmission Bugle head provides consistent penetration without damaging the paper Coarse threads are ideal...- $96.11
- $96.11
- Unit price
- per
-
Vendor: SENCO
Senco 06A Series 06A162W Screw, #6 Thread, Bugle Head, #2 Drive, Steel
For drywall to wood use. 50 screws per flat strip. Phillips recess provides smooth engagement with moderate torque transmission Bugle head provides consistent penetration without damaging the paper Coarse threads are ideal for use in wood connections Ultra sharp point quickly penetrates wood reducing...- $47.17
- $47.17
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 297079 Deck Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Star Drive, Sharp Point, Coated
Use for exterior deck and railing projects where rust resistance is important.- $86.34
- $86.34
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 631W Screw, 1/4 in Thread, 1-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 10 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $18.91
- $18.91
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 14998 Screw Kit, Sheet Metal/Wood, 221-Piece
Durable and reusable container with assorted types and sizes. Contains enough items to complete multiple projects.- $17.99
- $17.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 173M Wall Anchor, Polyethylene, 61 lb
The TripleGrip® is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side...- $15.36
- $15.36
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie DSVT212S Deck Screw, Tan, 2-1/2 in L, Ribbed Head, T25 Drive, Steel
The Deck-Drive™ DSV wood screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today's wood deck boards. The shank is designed to withstand the swelling...- $115.23
- $115.23
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie DSVT2S Deck Screw, Tan, 2 in L, Ribbed Head, T25 Drive, Steel
The Deck-Drive™ DSV wood screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today's wood deck boards. The shank is designed to withstand the swelling...- $155.16
- $155.16
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 211S Anchor, #6 to 8 Dia, 1 in L, 54 lb, Lead Alloy
Corrosion resistant. It is internally threaded and it installs flush to surface. The lead anchor is fast and easy to install It is corrosion-resistant and has a strong holding power It is internally threaded Installs flush to surface Use with metal or wood screw...- $4.71
- $4.71
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15LG250 Screw, Light Gray, High-Low, Twin Lead Thread, Hex Drive, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: CAMO
Camo 345139 Deck Screw, #7 Thread, 2-3/8 in L, Trim Head, Star Drive, Carbon Steel, ProTech-Coated, 1750/PK
Camo® Deck screws create a beautiful, fastener-free deck surface. Easy-to-install using either Marksman® tool, Camo® secures deck boards directly to the joist to reduce board movement and they back out easily in the event a board needs to be replaced. No pre-drilling is required...- $140.33
- $140.33
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 503N Wedge Anchor, 1/2 in Dia, 5-1/2 in L, 1654 lb, Steel, Plated
The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more...- $8.38
- $8.38
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05626 Washer, 5/16 in ID, Galvanized Steel, USS Grade
Midwest Fastener Washer, Flat, 5/16 in Dia Inside, USS Grade, Galvanized Steel- $50.99
- $50.99
- Unit price
- per
-
Vendor: SENCO
Senco 06A Series 06A125PB Screw, Gray, #6 Thread, 1-1/4 in L, Bugle Head, #2 Drive, Steel, Phosphate, 4000/PK
50 screws per flat strip. Gray phosphate finish. For drywall to wood. Compatible with DS235AC (264.0712), DS232AC (264.0670), DS215-18V (264.0654), DS212-18V (264.0662). Phillips recess provides smooth engagement with moderate torque transmission Bugle head provides consistent penetration without damaging the paper Coarse threads are ideal...- $110.12
- $110.12
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 193S Screw Anchor, #8-10 Thread, 1-1/4 in L, Polyethylene, 175 lb, 10/PK
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted. Easy to install Can be...- $5.20
- $5.20
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05505 Carriage Bolt, 3/8-16 in Thread, NC Thread, 3 in OAL, 2 Grade
Midwest Fastener Carriage Bolt, 2 Grade, Thread Type: NC, Thread Size: 3/8-16 in, Head Type: Round, 3 in OAL- $38.99
- $38.99
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28365 Concrete Screw Anchor, T25 Screw, 3/16 in Dia, 2-3/4 in L, Steel, Climaseal, 75/PK
The next generation of Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the finest when it comes to concrete anchoring. Engineered for a more stable drive with no bit slip Climaseal coating for corrosion...- $22.34
- $22.34
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 630T Screw, 1/4 in Thread, 1-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 100 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $67.62
- $67.62
- Unit price
- per
-
Vendor: TAPCON
Tapcon 28385 Concrete Screw Anchor, T30 Screw, 1/4 in Dia, 2-3/4 in L, Steel, Climaseal, 75/PK
The next generation of Tapcon anchors are engineered to be installed fast and trusted for a lifetime. They're the original and still the finest when it comes to concrete anchoring. Engineered for a more stable drive with no bit slip Climaseal coating for corrosion...- $33.70
- $33.70
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 364S Driller Toggle Bolt, 3 in L, Zinc, Chrome Zinc, 100 lb, 2/PK
The DrillerToggle® provides the holding power of a toggle bolt with the ease of installation of a WallDriller®. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor....- $5.16
- $5.16
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10280 Screw, #10 Thread, 1 in L, Hex, Socket Drive, Self-Drilling Point, Steel, Zinc
Midwest Fastener Screw, Thread Size: #10, 1 in L, Drive Type: Hex, Socket, Point Type: Self-Drilling, Steel, Zinc, Drive Size: 5/16 in 60 per pack- $9.99
- $9.99
- Unit price
- per
-
Vendor: PROSOURCE
DRYWALL SCREW 8X2-1/2 FINE2.5M
SCRW DRYWL PH FN #8X2-1/2 2.5M- $107.56
- $107.56
- Unit price
- per
-
Vendor: PROSOURCE
Orgill Bulk Nails 03579 Screw, #6-7 Thread, 2 in L, Fine Thread, Phillips Drive, Sharp Point
Orgill Bulk Nails Screw, Thread Size: #6-7, 2 in L, Thread Type: Fine, Drive Type: Phillips, Point Type: Sharp, Applicable Materials: Drywall, Wood- $102.69
- $102.69
- Unit price
- per
-
Vendor: PROSOURCE
Orgill Bulk Nails 03578 Screw, #6 Thread, 1-5/8 in L, Fine Thread, Phillips Drive, Sharp Point
Orgill Bulk Nails Screw, Thread Size: #6, 1-5/8 in L, Thread Type: Fine, Drive Type: Phillips, Point Type: Sharp, Applicable Materials: Drywall, Wood- $106.20
- $106.20
- Unit price
- per
-
Vendor: TEKS
Teks 21312 Screw, #8 Thread, 3/4 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc, 180 PK
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring...- $13.07
- $13.07
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0282138 Deck Screw, #7 Thread, 2 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Silver Dacrotized
Use for exterior projects where rust resistance is not as important.- $13.35
- $13.35
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.