-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10350DB1 Screw, #10 Thread, 3-1/2 in L, Coarse Thread, Bugle Head, Square Drive, Type 17 Point
Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended and a must near board ends to prevent splits. 0.344 in Dia, #2 square drive bugle head. 'Beaver Bite' type 17 auger point for extra fast starts. For pressure-treated lumber....- $30.60
- $30.60
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 131Y Hollow Wall Anchor, #6-32 Thread, Steel, Plated, 85 lb
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long. The hollow wall drive anchor is made entirely of steel and is vibration-resistant The screw head adapts to Philips or square or slot bits...- $8.83
- $8.83
- Unit price
- per
-
Vendor: E-Z ANCOR
E-Z Ancor 25310 Wall Anchor, 1-5/8 in L, Fiber Reinforced Nylon/Plastic, 75 lb
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or...- $16.32
- $16.32
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0281159 Deck Screw, 2-1/2 in L, Coarse Thread, Bugle Head, Combo Drive, Sharp Point, Ceramic
Decking screws are used for decking and wood to wood construction. The PRO-FIT® decking screws category includes ceramic coated deck screws with coarse threads for superior holding power when attaching to wood. Passes 1000 hr in salt Spray testing Use for exterior deck and...- $94.51
- $94.51
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0282078 Deck Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point
Use for exterior projects where rust resistance is not as important.- $13.35
- $13.35
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0281179 Deck Screw, 3 in L, Coarse Thread, Bugle Head, Combo Drive, Sharp Point, Ceramic
Decking screws are used for decking and wood to wood construction. The PRO-FIT® decking screws category includes ceramic coated deck screws with coarse threads for superior holding power when attaching to wood. Passes 1000 hr in salt Spray testing Use for exterior deck and...- $94.51
- $94.51
- Unit price
- per
-
Vendor: SENCO
Senco 07A200P Screw, 2 in L, #7 Drive
Senco Screw, Collated, Thread Type: Coarse, 2 in L, Drive Size: #7, Point Type: Sharp, Applicable Materials: Wood- $42.91
- $42.91
- Unit price
- per
-
Vendor: SENCO PRODUCTS
SCREW DECK COLTD 8X3
50 screws per flat strip. Thread: Coarse 2/3 with wax. Fits Tools: DS425AC (557.4827), DS440AC (557.4876), DS312-18V (305.6512)- $80.64
- $80.64
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 197S Screw Anchor, #12-14 Thread, 1-1/2 in L, Polyethylene, 200 lb
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted. Easy to install Can be...- $5.26
- $5.26
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors Lag Shield 253M Masonry Anchor, 276 lb, 5/16 in Screw, Zinc, 15/PK
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Zinc anchor with internal thread for lag bolt Installs flush to surface Lag screw shield is a corrosion-resistant masonry anchor with the best expansion- $23.56
- $23.56
- Unit price
- per
-
Vendor: PROSOURCE
Orgill Bulk Nails 03577 Screw, #6 Thread, 1-1/4 in L, Fine Thread, Phillips Drive, Sharp Point
Orgill Bulk Nails Screw, Thread Size: #6, 1-1/4 in L, Thread Type: Fine, Drive Type: Phillips, Point Type: Sharp, Applicable Materials: Drywall, Wood- $110.20
- $110.20
- Unit price
- per
-
Vendor: PROSOURCE
ProSource JL821083L Screw and Anchor Set, Screws: Zinc Plated, 60-Piece
Make your wall mounting DIY project a success with these drywall anchors with screws kit. Get the job done with confidence! The wall screws for hanging are made of rust-proof stainless steel with superior threads, sharp tips, and a strong truss head for easier...- $3.82
- $3.82
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 027L Anchor Kit, Nylon, 63 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $11.40
- $11.40
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S07C162FBP Deck Screw, #7 Thread, 1-5/8 in L, Coarse Thread, Trim Head, Square Drive, 135/PK
Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia and mitered ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts....- $29.16
- $29.16
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 501R Wedge Anchor, 1/2 in Dia, 3-3/4 in L, 1248 lb, Steel, Plated, 4/PK
The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more...- $23.07
- $23.07
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie Strong-Drive WSV2S Screw, #9 Thread, 2 in L, Rimmed Flat Head, T25 Drive, Zinc
Simpson Strong-Tie has re-engineered its popular subfloor screw to reduce driving force and increase installation speed. The new Strong-Drive WSV subfloor screw has been developed for fastening subfloor sheathing using the Quik Drive® auto-feed screw driving system. The Strong-Drive WSV Subfloor screw is the...- $142.14
- $142.14
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 624J Screw, 3/16 in Thread, 3-1/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $34.02
- $34.02
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 633T Screw, 1/4 in Thread, 2-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 100 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $88.37
- $88.37
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 013T Hollow Wall Anchor, Nylon, 52 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $25.60
- $25.60
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10250DBB Screw, #10 Thread, 2-1/2 in L, Coarse Thread, Bugle Head, Square Drive, 200/PK
Coarse threads approximately 2/3 up shank draw board tightly to substrate. Pre-drilling always recommended and a must near board ends to prevent splits. 0.344 in Dia, #2 square drive bugle head. 'Beaver Bite' type 17 auger point for extra fast starts. For pressure-treated lumber....- $349.36
- $349.36
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0286078 Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Phillips Drive, Sharp Point, Phosphate, 271/BX
Use for drywall to wood studs and all-purpose wood fastening. Coarse threads provide good holding power in wood Buglehead with Phillips drive- $5.46
- $5.46
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24330 Screw Anchor, 2-3/4 in L, Hex Drive, Steel, Climaseal, 75 PK, 1/4 in Drive
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower...- $35.18
- $35.18
- Unit price
- per
-
Vendor: TAPCON
Tapcon 24315 Screw Anchor, 1-1/4 in L, Hex Drive, Steel, Climaseal
Fast installation. Replaces small diameter expansion anchors, plugs and screws in light to medium duty applications. No need to pre-spot hole. No inserts are required. Reversible and removable. Can be installed close to an edge. Thread design results in increased pullout values and lower...- $28.64
- $28.64
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T08200DWP Deck Screw, #8 Thread, 2 in L, Box Thread, Flat Head, 6-Lobe Drive, Stainless Steel
The Deck-Driveâ„¢ DWP wood SS screw is a powerful fastening solution for deck, dock and general exterior applications where extra-corrosion protection is needed. With its specially-designed sharp point and unique box threads, the DWP is ideally suited for the majority of wood used in...- $34.44
- $34.44
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 10277 Screw, #8 Thread, 1 in L, Hex, Socket Drive, Self-Drilling Point, Steel, Zinc, 1 PK
Midwest Fastener Self-Drilling Screw, #8 Thread, 1 in Length, Hexagonal Head, Socket Drive, 1/4 in Drive, Drill Point, Steel, Zinc, 80 pc.- $9.99
- $9.99
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 623W Screw, 3/16 in Thread, 2-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 10 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $16.44
- $16.44
- Unit price
- per
-
Vendor: RED HEAD
Red Head TruBolt 12377 Wedge Anchor, 1/4 in Dia, 2-1/4 in OAL
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For...- $15.29
- $15.29
- Unit price
- per
-
Vendor: RED HEAD
Red Head Hammer-Set 35305 Anchor, 1/4 in Dia, 2 in L, Steel, Zinc
For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes. Easy installation For fastening applications in concrete, block and brick- $22.71
- $22.71
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15BW250 Screw, High-Low, Twin Lead Thread, Hex Drive, Bright White, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15BR250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, Barn Red, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: TEKS
Teks 21348 Screw, #12 Thread, 2 in L, Coarse Thread, Hex Drive, Self-Drilling, Self-Tapping Point, Steel, Zinc
Teks® fasteners are offered in sharp and drill points that easily penetrate light to heavy gauge metal and wood. Professionals no longer have to struggle when engaging their work surface. The self-tapping threads are designed to tap holes while providing great holding power ensuring...- $13.07
- $13.07
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15CG250 Screw, High-Low, Twin Lead Thread, Hex Drive, Charcoal Gray, Type 17 Point, 250/BAG
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: E-Z ANCOR
E-Z Ancor 11364 Wall Anchor, 1-5/8 in L, Fiber Nylon/Plastic, Zinc, 75 lb
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or...- $2.49
- $2.49
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 492R Wedge Anchor, 1/4 in Dia, 3-1/4 in L, 449 lb, Steel, Plated
The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more...- $14.69
- $14.69
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 021M Hollow Wall Anchor, Nylon, 63 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $12.20
- $12.20
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW1BR250 Screw, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Type 17 Point, Barn Red
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $25.27
- $25.27
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05583 Lag Screw, 3/8 in Thread, 2 Grade, Galvanized
Midwest Fastener Lag Screw, 2 Grade, Galvanized, Thread Size: 3/8 in, Thread Length: 4 in- $54.99
- $54.99
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 297078/0281078 Deck Screw, #6 Thread, 1-1/4 in L, Coarse Thread, Bugle Head, Combo Drive, Sharp Point, Gray
Use for exterior deck and railing projects where rust resistance is important. Passes 1000 hrs in salt spray testing- $14.78
- $14.78
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 676T Screw, 3/16 in Thread, 4 in L, Hex, Socket Drive, Steel, Fluorocarbon-Coated, 100 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $114.75
- $114.75
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15TP250 Screw, High-Low, Twin Lead Thread, Hex Drive, Self-Tapping, Type 17 Point, Taupe
#9-15 Metal-to-wood screws are sealing self-piercing tapping screws made from heat treated Steel, case hardened for roofing and siding applications. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving and conforms to the metal surface for...- $30.26
- $30.26
- Unit price
- per
-
Vendor: ACORN INTERNATIONAL
Acorn International SW-MW15SS250 Screw, #9 Thread, High-Low, Twin Lead Thread, Hex Drive, 1-1/2 in Length Under Head
#9-15 stainless steel metal to wood screws are sealing self-piercing tapping screws made from type 316 passivated stainless steel for roofing and siding applications in corrosive environments. A 1/4 in across flats high hat hex washer head with assembled EPDM washer offers easy driving...- $77.69
- $77.69
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 171M Wall Anchor, Polyethylene, 35 lb
The TripleGrip® is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side...- $13.71
- $13.71
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 013M Hollow Wall Anchor, Nylon, 52 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $19.98
- $19.98
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 034S Hollow Wall Anchor, Zinc, 52 lb
The WallDriller® is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power...- $4.43
- $4.43
- Unit price
- per
-
Vendor: COBRA ANCHORS
Cobra Anchors 633J Screw, 1/4 in Thread, 2-3/4 in L, Flat Head, Phillips, Robertson Drive, Steel, 25 PK
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant...- $43.60
- $43.60
- Unit price
- per
-
Vendor: MIDWEST FASTENER
Midwest Fastener 05600 Lag Screw, 1/2-6 Thread, 6 in OAL, 2 Grade, Galvanized Steel, SAE Measuring
Midwest Fastener Lag Screw, Measuring Type: SAE, Galvanized Steel, 2 Grade, Thread Size: 1/2-6, 6 in OAL- $61.99
- $61.99
- Unit price
- per
-
Vendor: CAMO
Camo 0364094 Structural Screw, 1/4 in Thread, 1-1/2 in L, Hex Head, Hex Drive, Sharp Point, PROTECH Ultra 4 Coated, 250
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and...- $125.26
- $125.26
- Unit price
- per
-
Vendor: CAMO
Camo 0372244 Structural Screw, 0.155 in Thread, 6 in L, Truss Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 50
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and...- $58.46
- $58.46
- Unit price
- per
-
Vendor: CAMO
Camo 0366270 Structural Screw, 5/16 in Thread, 10 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 10
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and...- $33.19
- $33.19
- Unit price
- per
-
Vendor: CAMO
Camo 0366264 Structural Screw, 5/16 in Thread, 8 in L, Flat Head, Star Drive, Sharp Point, PROTECH Ultra 4 Coated, 50
Camo exterior fasteners are designed specifically for exterior projects. Each screw starts fast, holds strong, and is backed by a Camo warranty against rust and corrosion so you can confidently use them in all of your decking projects, substructures, landscaping, fences, pole barns and...- $96.77
- $96.77
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.