The Gardner Bender 1/4 in coaxial cable clamp secures RG-59, RG-6 coaxial cables and others. This cable clamp includes a combo screw for safer installations and features a screw-in depth of 1/2 in. Combo screw for safe installs Screw-in depth 1/2 in

Southwire Sprinkler Wire, Wire Size: 18 AWG, 250 ft L, Number of Conductors: 5, Conductor Material: Copper, Conductor Insulation: Polyethylene, Stranded/Solid: Stranded, Sheath Material: PVC, Sheath Color: Black, Sheath Diameter: 0.246 in, 24 V, Resistance: Sunlight, UV-Resistant, Operating Temperature: -20 to 75 deg C...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Mid size wallplates polycarbonate toggle polycarbonate wallplates are virtually unbreakable, with high structural rigidity, long term form retention and superior impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive...

Mid size wallplates, polycarbonate toggle polycarbonate wallplates are virtually unbreakable, with high-structural rigidity, long term form retention and superior impact and abrasion resistance. Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving...

Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and great impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size 3-1/8 in x 4-7/8 in. Polycarbonate...

Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Die-cast of high-strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.

Feed-through in-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed,...

For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder-coated finish. Eight box mounting options with detachable lugs...

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

Eaton's mid-size screw less wallplates help provide a sleek, smooth and seamless look to your wiring devices! Rugged construction reduces installation cost due to less plate breakage and resists bowing to provide a smooth, flat installation. Exclusive timesaving screw-catch feature holds mounting screws captive...

Quickly installed over entire length of wire run. Excellent for under hood and trailer wiring. Corrugated for added flexibility Split down the center for wire breakout when needed Flex tubing protects hoses, wire and cables from cuts, abrasions and UV wear

Ceramic tube construction, for use in microwave ovens. 1/4 in x 1-1/4 in physical size, CSA certified, UL listed.

PUSH-IN WIRE CONNECTOR 4 WIRE

Annealed (soft) copper conductor cable, with a ground wire, primarily used in residential wiring as branch circuits for outlets, switches and other loads. May be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90 deg C...

CONNECTOR CLAMP FLEX-BOX 3/8IN

Spring metal mounting brackets. Fixture rating limit of 10 lb. Heat-resistant. 3-1/2 in Dia round old/new work box base, ears and snap-in bracket. UL listed. New snap-in bracket design Device and fixture mounting Breakaway flange for small fixtures Resists flexing and holds their shape...

3/4X450IN VINYL ELECT TAPE

Switch plate with horizontal one opening, two opening and three opening sizes. Older style device with a rounded shape that is slightly flattened top and bottom. Interchangeable, supplied with mounting straps. Flexible, smaller than a standard duplex receptacle device, fits in a smaller opening....

Pre-installed conductors within an overall protective metallic interlocked armor. 45% lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90...

Southwire Power Cord, Portable, 10 AWG Wire, 250 ft Length, 4 Conductors, Strands per Conductor: 104, 104/30 Strand, Copper Conductor, TPE Conductor Insulation, Stranded, TPE Sheath, Black Sheath, SEOOW Shielding, 600 V, 25 A, -50 to 105 deg C Operating Excellent abrasion, ozone, sunlight,...

Wiring for industrial machinery, washing machines and various other large appliances, heavy-duty tools, motors and temporary electrical power and lighting installations for construction sites. 8 ga, 3 conductor stranded with insulated ground. Rated -50 to 105 deg C. 40 A, 600 V. RoHS compliant....

Galflex® Type RWS is manufactured with a galvanized, corrosion-resistant, high-strength steel alloy. The metal strip is helically formed into a continuously interlocked flexible metal conduit that can withstand impact and crushing forces. Provides mechanical protection for conductors and cable For use with listed connectors...

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar...

Inner conductors are type THHN, rated 90 deg C, 600 V. Solid strands. Outer jacket is PVC, rated at 75 deg C. Amp rating of the product is limited to that for 60 deg C rated conductors per the National Electric Code Article 336....

Inner conductors are type THHN, rated 90 deg C, 600 V. Solid strands. Outer jacket is PVC, rated at 75 deg C. Amp rating of the product is limited to that for 60 deg C rated conductors per the National Electric Code Article 336....

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. SCH 40. UL 651 Listed to the NEC by the ETL, UL listed.

Indoors. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure.

Straight blade receptacle. Meets all UL and CSA specifications. Triple wire line contacts provide excellent long term plug retention. High impact and chemical-resistant nylon face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 20 A, 250 V....

Eaton Wiring Devices Single Receptacle, 250 V, 20 A, 2 Pole, 3 Wires, Side Wiring, 14 to 10 AWG Wire, NEMA 6-20R, -4 to 140 deg F Operating, Flush Mounting, PVC, Light Almond, Dimensions: 1.31 in L x 0.83 in W x 4.19 in...

Commercial-grade straight blade receptacles 20 A, 250 V, NEMA 6-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time....

Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections...

Used as a panel feed in multiple unit dwellings. May be used in wet or dry locations at temperatures not to exceed 90 deg C. 600 V maximum. Meets or exceeds UL Standard 44 for type XHHW-2 conductors or UL Standard 83 for THHN/THWN...

Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact...

Fast-acting for maximum protection. Glass tube construction. Nickel or silver-plated brass. 5 mm x 20 mm. UL/CSA 248-14 rated. Fast-acting, low breaking capacity

Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in THK steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements,...

Halex Rigid Conduit Nipple, Trade Size: 1/2 in, Threaded Connection, Steel Use to connect two steel outlet boxes or other metal enclosures Use to extend a length of threaded rigid or IMC conduit

Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed. Use to connect two steel outlet boxes or other metal enclosure Use...

Halex Rigid Conduit Nipple, Trade Size: 3/4 in, Threaded Connection, Steel Use to connect two steel outlet boxes or other metal enclosures Use to extend a length of threaded rigid or IMC conduit

Halex Rigid Conduit Nipple, Trade Size: 1/2 x 1-1/2 in, Threaded Connection, Steel Use to connect two steel outlet boxes or other metal enclosures Use to extend a length of threaded rigid or IMC conduit

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, auto-motive and farm applications demanding high-levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB™ ties lock tight without stretching or sliding. The thick nylon 6/6 material and...

Feed-through in-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed,...

Ultrasonic welding and integrated construction of the strap and body. Back wire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 VAC rating for fluorescent lighting...

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.

Continuously monitors the circuit and quickly turns off the power (trips) when a dangerous condition is detected. Equipped with a diagnostic feature known as time-saver diagnostics which indicates the type of fault that last occurred on the circuit.

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Leviton's IPV02/IPS02 universal vacancy and occupancy sensors combine state-of-the-art technology with new aesthetics to provide optimal management of lighting and motor loads and a choice of either Manual-On (vacancy sensor) or Automatic-On (occupancy sensor) switching. These energy-saving sensors are engineered to control current LED,...