Plug blades are firmly embedded into insulating body. 15 A, 125 V. 13/32 in cord diameter. Tough thermoplastic construction Plug blades are firmly embedded in body

Ball diameter of 1/8 in with end bell and connector. Carded. Flasher buttons are medium-based and offer choices of flash frequencies

Ball diameter of 1/8 in with end bell and connector. Carded. Flasher buttons are medium-based and offer choices of flash frequencies

Eaton Wiring Devices Ball Chain with End Bell and Connector, Chain Size: #6, Chain Length: 3 ft, Bead Diameter: 0.13 in, Steel, Nickel, Suitable for: Toggle Switch Plate Flasher buttons are medium-based and offer choices of flash frequencies

Highly visible and easy to locate at the job sight. Molded out of impact-and chemical-resistant nylon. Neoprene gasket seals cord opening to protect against moisture, dirt, wood chips and more. Temperature rating of -40 to 75 deg C. 15 A. UL 498 listed (file...

Highly visible and easy to locate at the job sight. Molded out of impact-and chemical-resistant nylon. Neoprene gasket seals cord opening to protect against moisture, dirt, wood chips and more. Temperature rating of -40 to 75 deg C. 15 A. UL 498 listed (file...

Highly visible and easy to locate at the job sight. Molded out of impact-and chemical-resistant nylon. Neoprene gasket seals cord opening to protect against moisture, dirt, wood chips and more. Temperature rating of -40 to 75 deg C. 15 A. UL 498 listed (file...

Highly visible and easy to locate at the job sight. Molded out of impact-and chemical-resistant nylon. Neoprene gasket seals cord opening to protect against moisture, dirt, wood chips and more. Temperature rating of -40 to 75 deg C. 15 A. UL 498 listed (file...

Standard-grade. Meets all UL 498 requirements. Plugs blades are firmly embedded in body. 15 A, 125 V. 5/16 in cord diameter. Straight, NEMA 5-15.

In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1.

In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1.

Grounding adapter with grounding lug converts 2-pole polarized outlet to 3-wire grounding outlet. Grounding lug fastens to wallplate mounting screw for excellent ground connection. Safety tab extends face on adapter to assure grounding plugs can not be plugged in incorrectly. Polypropylene body resists dirt...

Grounding adapter with grounding lug converts 2-pole polarized outlet to 3-wire grounding outlet. Grounding lug fastens to wallplate mounting screw for excellent ground connection. Safety tab extends face on adapter to assure grounding plugs can not be plugged in incorrectly. Polypropylene body resists dirt...

Three outlet cube taps - non-grounding molded of high impact-resistant plastic for long-term durability. Swivel adapters hug cords close to wall in tight-fitting places such as behind furniture and office equipment. Molded of high-impact-resistant plastic for long-term durability Six outlet taps provide center mounting...

Three outlet cube taps - non-grounding molded of high impact-resistant plastic for long-term durability. Swivel adapters hug cords close to wall in tight-fitting places such as behind furniture and office equipment. Molded of high-impact-resistant plastic for long-term durability Six outlet taps provide center mounting...

Circuit control toggle switch, bat handle canopy switch is for use in fixtures, appliances, doorways and equipment. Switch features shank threaded 15/32 in-32 x 9/32 in (7.1 mm) long. Keyed shank, indicator plate and finishing nut furnished. 6 in (152.4 mm) wire leads, #18...

Meets all UL 20 requirements. Shank is threaded 15 - 32 in, 32 in x 9/32 in long. Keyed shank, indicator plate and finishing nut furnished. Wire leads are 6 in long #18, stripped 3/4 in. Metal On/Off bat handle. Temperature rating -40 to...

UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4...

Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less.

Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less.

Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less.

Fluorescent starters - condenser type all-purpose two-terminal standard starter accurately timed to combine starts with long bulb life. For use where lights are turned on more than 5X daily. Also in devices where bulb life expectancy is 2 years or less.

UL listed (file no.E18704). Meets all CSA requirements, C22.2 no.111. For use in fixtures, appliances and equipment. Shank is threaded 15/32 in - 32 x 15/32 in long. Keyed shank, hex nut and finishing nut furnished. 6 wire lead terminals, number 18, stripped 3/4...

Solid brass plug blades are firmly embedded in body. Resists chemical attack and is less brittle in extremely low temperatures. With terminal screw clamps. Combination Slot/Phillips head mounting and terminal screws for installation flexibility (Slot/Robertson screws in Canada where available). Terminal screws backed out,...

Terminals in individual chambers to positively insulate conductors. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out, ready for wiring. Nylon Kwiklok features patented twist-actuated internal cord clamp, reduces installation time. Meets all UL 498 requirements. Yellow color....

Molded from non-flammable nylon. Flush fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High-gloss finish is soil resistant. Standard-size - 2-3/4 in x 4-1/2 in. Nylon duplex receptacle rugged construction reduces installation cost due to less plate...

Molded from non-flammable nylon. Flush fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High-gloss finish is soil resistant. Standard-size - 2-3/4 in x 4-1/2 in. Nylon duplex receptacle rugged construction reduces installation cost due to less plate...

Molded from non-flammable nylon. Flush-fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50 x 2.75 in. Rugged construction reduces installation cost due to less plate breakage and resists bowing...

Molded from non-flammable nylon. Flush-fitting, warp-resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50 x 2.75 in. Rugged construction reduces installation cost due to less plate breakage and resists bowing...

Converts one socket to two sockets. 250 V, 660 W. UL listed.

Converts one socket to one socket and two side outlets. 125 V, 660 W. UL listed.

Converts one socket to one socket and two side outlets. 125 V, 660 W. UL listed.

Socket to one socket and two side outlets. Pull chain controls lampholder. Side outlets are always on. 125 V, 660 W. UL listed.

Socket to one socket and two side outlets. Pull chain controls lampholder. Side outlets are always on. 125 V, 660 W. UL listed.

UL listed, (file no. E15055). Meets all UL 496 and 498 requirements. CSA certified, (file no. 1739 (6231-04). NOM certified. Temperature rating -40 to 65 deg C. 250 V, 660 W. Terminals have pressure plates to protect wires Accepts #10-6 AWG wire

UL listed, (file no. E15055). Meets all UL 496 and 498 requirements. CSA certified, (file no. 1739 (6231-04). NOM certified. Temperature rating -40 to 65 deg C. 250 V, 660 W. Terminals have pressure plates to protect wires Accepts #10-6 AWG wire

Socket to outlet, keyless switch. UL listed, (file no. E15055). Meets all UL 496 and 498 requirements. NOM certified. Temperature rating -40 to 65 deg C. 125 V, 660 W.

Meets all UL 498 requirements. Angle plug, allows placement of cord in convenient location. 3/4 in x 1-1/4 in x 1-1/4 in. 15 A, 125 V. 21/64 in cord diameter. NEMA 1-15. Angle plugs allow placement of cord in convenient location Plug blades are...

Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.

Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.

Automatic nightlights photo sensor automatically lights -on at dusk, off at dawn. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic.

Automatic nightlights photo sensor automatically lights -on at dusk, off at dawn. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic.

For testing electric circuits from 90 to 600 V. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. Detects the presence of power on either AC or DC circuits Identifies circuit conductors

Caps threaded 1/8 in-27 I.P.S fits standard lamp stems. Set screw prevents rotation of socket. 250 W, 250 V. Temperature rating of -40 to 149 deg F. UL listed, file E7430, UL 496 requirements. NOM certified. Set screw prevents rotation of socket One Circuit...

Caps threaded 1/8 in - 27 IPS. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 W, 250 V. Temperature rating of -40 to...

Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed,...

Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed,...

Caps threaded 1/8 in - 27 I.P.S fits standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 W, 250 V. Temperature rating of -40 to 65 deg C. UL listed, file E7430, UL 496 requirements. NOM certified. Set screw...

Molded of heat and impact-resistant urea. 660 W, 250 V. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. Set screw prevents rotation of socket Two-circuit sockets operate dual filament lamps on sequence of low, medium, high, off

Interior pull chain for medium base lamp holders. Molded of heat and impact-resistant phenolic or urea. Interiors are UL component recognized. One circuit pull chain switch. 250 W, 250 V. Set screw prevents rotation of socket Two-circuit sockets operate dual filament lamps on sequence...