Heats up to working temperature in under 15 secs. White LED light illuminates working surface. Dual power (hi/lo) indicated by red and green LEDs. Co-molded grip for a comfortable feel. Protective safety cap turns off power when placed on tool. Over 150 intermittent solder...

The heavy-duty Riveter is designed for use with aluminum, steel and stainless steel rivets in a wide range of applications, including metalworking, builder/remodeler, plumbing, mechanical and more. It includes four nose pieces and a nose piece wrench for versatility and easy change out for...

Quick-Release' trigger allows for fast and easy positioning and release. Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure. High-tech resin construction provides strength and durability. Specially designed jaws hold odd-shaped workpieces. Quick-release trigger allows for...

Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in. Soft...

Metal spring clamps with soft-grip pads.

The Dremel® VersaFlame™ is a small butane torch designed to make your work around the house and jobsite easier. The VersaFlame™ comes with a nine-piece kit that gives you the power to tackle an array of applications. By simply switching tips, you can use...

Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod. High-strength silicone bronze Used for connecting copper conductors to metallic water pipe or ground rods

Medium strength aluminum can be used with aluminum and where rust is a potential problem. Reusable, full visibility packaging simplifies product selection and storage. Medium strength aluminum can be used with aluminum and where rust is a potential problem Full visibility packaging simplifies product...

Made of dropped forged steel and has a 18 oz, point and chisel head. Shock proof, spiral grip handle. Specially designed for welding applications. Black color. Shock proof, spiral grip handle 18 oz Head

Made of copper, for Weller soldering guns. Specs: Tip O/D 0.165 in; Reach/length 0.885 in.

Oatey® rosin core wire solder is a tin-lead alloy wire solder with a rosin flux core for use in electrical applications, including wiring and other fine electronic work. Contains lead not for use on drinking water lines Cannot be sold or used in Indiana...

Metal spring clamps with Hard Plastic-grip pads.

With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips...

This 1000-pack of 9/16 in heavy-duty narrow crown staples are convenient and reliable. Used for heavy-duty stapling jobs such as insulation carpet underlayment and roofing felt, these staples come in sturdy plastic packaging to helps reduce breakage of the stick. With color-coded packaging, you...

The T72 heavy-duty wire and cable staple gun is a reliable tacker that shoots large insulated staples for the professional installation of twin and earth wire and communications and data cable. With a wire guide included, the all-steel T72 takes 5 mm or 9...

Blue Point Fasteners Powder Load, Caliber Load: 0.22, Power Level: 4, Load Type: Neck Down Single-Shot, Color Code: Yellow, 5.6 mm Dia, 16 mm L, Suitable for: POWERS P1000, P2201, Ramset 721, M70, HILTIDXE37, DXE72, SIMPSONPT22, PT22H, BP307 and BP720 Powder Actuated Tool

Blue Point Fasteners Powder Load, Caliber Load: 0.27, Power Level: 3, Load Type: Long Strip, Color Code: Green, 6.8 mm Dia, 11 mm L, Suitable for: POWERS P3500, PA3500, P3600, Ramset SA270, Viper, Cobra, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460 and All Other...

Blue Point Fasteners Low Velocity Load, Caliber Load: 0.27, Power Level: #4, Load Type: Long Strip, Color Code: Yellow, 6.8 mm Dia, 11 mm L, Suitable for: BP301, BP450, POWERS P3500, PA3500, P3600, RAMSET SA270, Viper, Cobra, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460...

Blue Point Fasteners Low Velocity Load, 0.27 Caliber, Power Level: #5, Load Type: Long Strip, Brass, Red Color Code, 6.8 mm Diameter, 11 mm Length, Suitable for: BP301, BP450, POWERS P3500, PA3500, P3600, RAMSET SA270, Viper, Cobra, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460...

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Powder Actuated Tool, Control Type: Semi-Automatic, Dimensions: 13-3/4 in L Revolutionary noise canceling system Power level adjuster Uses standard 0.27 cal 10 shot strip loads

Blue Point Fasteners Low Velocity Single Shot Load, Caliber Load: 0.22, Power Level: #2, Load Type: Neck Down, Number of Loads: 1, Brass, Color Code: Brown, 5.6 mm Dia, 16 mm L, Suitable for: BP307, BP720, POWERS P1000, P2201, RAMSET 721, M70, HILTIDXE37, DXE72,...

The BP307S is a low velocity powder actuated, single shot, 0.22 caliber tool which can be used to install 0.3 in to 0.315 in head drive pins and 1/4 -20 threaded studs, up to 3 in total length. The BP307S is designed for maintenance,...

Blue Point Fasteners Low Velocity Single Shot Load, Caliber Load: 0.22, Power Level: #4, Load Type: Neck Down, Number of Loads: 1, Brass, Color Code: Yellow, 5.6 mm Dia, 16 mm L, Suitable for: BP307, BP720, POWERS P1000, P2201, RAMSET 721, M70, HILTIDXE37, DXE72,...

Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

The BP301C is engineered and designed as a low velocity, semi-automatic 0.27 caliber tool that can be used to install 0.300/8 mm headed drive pins and 1/4 in-20 threaded studs, up to 2-1/2 in total length. This tool is designed for high-speed use and...

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin with Metal Round Washer, Galvanized, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool

For use in Arrow No. ET50, ETC50, ETN50, ETF50, ETF50BN, T55C, T55, T50, T50PBN staple gun tackers and ETC50 cordless gun tacker.

The STANLEY Fatmax® hammer tacker driver mechanism is a true time-saver, delivering more than 500,000 cycles and featuring an anti-jam mechanism and surface guard. The bottom-load, high-capacity magazine accepts up to two full sticks or staples. Chrome-plated steel construction frame and comfort grip. Driver...

Oatey® 95/5 lead-free rosin core wire solder is a tin antimony wire solder with a rosin flux core designed for use in electrical applications. Rosin flux is contained within the core

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy. EVA foam...

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy. EVA foam...

Rubberized clamping arms for added protection. Compatible with T43601 portable LED work light. Mounts laser levels, flood lights and camera tripod arms to a quick-support od. Metal arm extends out 12 in (30.5 cm). Adjustable to several different angles. Can be set up and...

Extends any quick support rod by 18 in.

Replacing the standard gripper pad with either of these soft pads enhances traction on wet surfaces and protects delicate surfaces. These extra wide pads evenly distribute force over a large area. Pads can only be mounted at the top end of the quick support...

Task QSRs are versatile, strong and easy-to-use. QSRs are indispensable when installing drywall, crown molding, cabinets, trim, sinks and more. They can be used as temporary safety supports or grab rails and they make installing dust barriers or backdrops quick and easy. EVA foam...

This extra-wide rubber gripper pad features the same non-slip material as the standard Gripper Pad. The larger surface area helps to distribute pressure, enhances traction and is able to span larger gaps. Pads can only be mounted at the top end of the quick...