-
Vendor: MARSHALLTOWN
Marshalltown TEK290 Triple Edge Knife, Plastic Blade, Textured Handle, Plastic Handle
Marshalltown Triple Edge Knife, Plastic Blade, Textured Handle, Plastic Handle Textured handle for better grip- $3.91
- $3.91
- Unit price
- per
-
Vendor: MARSHALLTOWN
Marshalltown TGS1 Extra Large Tile Grout Sponge, 7-1/4 in L, 5-1/8 in W, 2-3/8 in Thick
Used to wipe excess grout from joints. Corners rounded to prevent digging or marring joints. Rounded corners to prevent digging out and marring joints- $7.14
- $7.14
- Unit price
- per
-
Vendor: MARSHALLTOWN
Marshalltown The Premium Line Series 2161 Drywall Texturing Trowel, 5 in W Blade, 11-1/2 in L Blade, Plastic Blade
Unique composition blade material. Has the ability to retain its flat shape. Can be used for embedding the mesh in EIFS applications or texturing. Unique composition blade material Retains its flat shape- $33.56
- $33.56
- Unit price
- per
-
Vendor: MARSHALLTOWN
Marshalltown TWR19 Tie Wire Reel, Cast Aluminum
Cast aluminum construction. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt- $60.93
- $60.93
- Unit price
- per
-
Vendor: MARSHALLTOWN
Marshalltown TWR26 Tie Wire Reel, Plastic
Made of lightweight durable plastic to give many years of trouble-free use. Fits any standard size belt. Made of lightweight durable plastic to give many years of trouble-free use Fits any standard size belt- $48.65
- $48.65
- Unit price
- per
-
Vendor: MARSHALLTOWN
Marshalltown US920 Drywall Utility Saw, 6 in L Blade, Steel Blade, 8 TPI, Contoured Handle, Hardwood Handle
Rugged steel blade. Sharp point can penetrate wallboard without drilling. Cuts wallboard, masonite, plywood and wood. Contoured hardwood handle with steel ferrule. Sharp point can penetrate wallboard without drilling Contoured hardwood handle with steel ferrule- $11.24
- $11.24
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 200P Drywall Hand Sander, 9-3/8 x 3-1/4 in Pad/Disc, DuraSoft Handle
Marshalltown's lightweight, 9 x 3-1/4 in hand sander can be used to sand drywall joints or other general sanding projects. It's designed to hold die-cut, half sheets of standard sandpaper, or sandscreen. The hand sander has a flexible aluminum backing plate bonded to a...- $8.28
- $8.28
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 226 Trowel, 1/4 in W x 1/4 in D Notch, 11 in L, 4-1/2 in W, Square Notch
QLT Trowel, Notch Shape: Square, Notch Size: 1/4 in W x 1/4 in D, Steel Blade, 11 in L, 4-1/2 in W, Plastic Handle- $5.78
- $5.78
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 260P Pole Sander, 9 in L x 3-1/4 in W Dimensions
The MARSHALLTOWN pole sander has a low profile, no slip swivel bracket that makes this an ideal tool for sanding drywall joints until they're flush with the surrounding walls. It is made from lightweight, reinforced die-cast aluminum and bonded to a foam rubber pad...- $9.88
- $9.88
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 930 Tuck Pointer, 1/2 in W, 6 in L, Polymer, Hardwood Handle
Tempered blade that is fully ground and polished. Hardwood handle with metal ferrule is securely attached. Blade size and shape allow easy access between bricks. Tempered blade that is fully ground and polished Blade size and shape allow easy access between bricks Hardwood handle...- $8.96
- $8.96
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 934 Margin Trowel, 5 in L Blade, 1-1/2 in W Blade, Steel Blade, Hardwood Handle
Blade is tempered, ground and polished. Wood handle with steel ferrule securely attached. Tempered steel blade is fully ground and polished- $7.80
- $7.80
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT 975 Trowel, 1/2 in W x 1/2 in D Notch, 11 in L, 4-1/2 in W, Square Notch, Straight Handle
Used to spread adhesive or mastic on the base surface before laying tile, carpet or other floor coverings. Aluminum mounting attached to a hard tempered steel blade. Straight, smooth wood handle. Aluminum mounting attached to a hard tempered steel blade Notch style and size...- $14.75
- $14.75
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT MB42 Bull Float, 42 in L Blade, 8 in W Blade, Magnesium Blade, Square End Blade
Extruded from magnesium alloy. Lightweight, long wearing. Includes a bracket assembly. Extruded from magnesium alloy Lightweight, long wearing- $199.89
- $199.89
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT NT669 Notched Trowel, 1/16 in Notch, 11 in L, 4-1/2 in W, Square Notch, Soft-Grip Handle
The contractor-grade QLT notched trowels are perfect for creating lines in material. The trowel comes in an 11 x 4-1/2 in size. You have your choice of notch shape, notch size, handle material and handle style. Choose between rivets or spot welded to fit...- $15.00
- $15.00
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT NT670 Notched Trowel, 1/2 in W x 1/2 in D Notch, 11 in L, 4-1/2 in W, Square Notch, Soft-Grip Handle
The contractor-grade QLT notched trowels are perfect for creating lines in material. The trowel comes in an 11 x 4-1/2 in size. You have your choice of notch shape, notch size, handle material and handle style. Choose between rivets or spot welded to fit...- $15.00
- $15.00
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT PMT280 Margin Trowel, 5 in L Blade, 2 in W Blade, Plastic Blade, Contoured Handle
Durable ABS plastic construction. Won't rust or corrode. Comfortable contoured handle. Hang-up hole for storage. Comfortable contoured handle Hang-up hole for storage- $2.60
- $2.60
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT PT144B Pool Trowel, Steel Blade, Curved Handle, Wood Handle, 4 in OAW
QLT Blue steel with short aluminum alloy mounting and a curved hardwood handle. Blade is flexible enough to bend to almost any radius. Short aluminum alloy mounting Blade is flexible enough to conform to almost any radius Comfort grip or hardwood handle- $28.67
- $28.67
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT PT164B Pool Trowel, Steel Blade, Comfort Grip, Curved Handle, Wood Handle, 4-1/2 in OAW
QLT Blue steel with short aluminum alloy mounting and a curved hardwood handle. Blade is flexible enough to bend to almost any radius. Short aluminum alloy mounting Blade is flexible enough to conform to almost any radius Comfort grip or hardwood handle- $29.63
- $29.63
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT WF943 Hand Float, 12 in L Blade, 3-1/2 in W Blade, 1/2 in Thick Blade, Mahogany Blade, Structural Foam Handle
Made from 1/2 in thick seasoned mahogany, a very smooth finish. A powder that mixes with water Set time 3 to 5 mins Stops water, even under pressure Patch mortar joints, cracks and holes in masonry walls- $12.07
- $12.07
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT WF944 Hand Float, 14 in L Blade, 3-1/2 in W Blade, 1/2 in Thick Blade, Mahogany Blade, Structural Foam Handle
Made from 1/2 in thick seasoned mahogany, a very smooth finish. Blocking running water or leaks in cracked masonry or concrete surfaces- $12.35
- $12.35
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT WF946 Hand Float, 16 in L Blade, 3-1/2 in W Blade, 1/2 in Thick Blade, Mahogany Blade, Structural Foam Handle
Made from 1/2 in thick seasoned mahogany, a very smooth finish. Has a very smooth finish- $10.11
- $10.11
- Unit price
- per
-
Vendor: MARSHALLTOWN
QLT WF947 Hand Float, 18 in L Blade, 3-1/2 in W Blade, 1/2 in Thick Blade, Mahogany Blade, Structural Foam Handle
Made from 1/2 in thick seasoned mahogany, a very smooth finish. Has a very smooth finish- $9.73
- $9.73
- Unit price
- per
-
Vendor: MARSHALLTOWN
TROWEL MARGIN 5X2INCH WOOD HDL
Blade is tempered, ground and polished. Wood handle with steel ferrule securely attached.- $7.83
- $7.83
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 47002 Nail Puller, 11 in L, HCS, Blue, 1 in Dia, 2 in W
Designed for extracting deeply imbedded nails, these 11 in pullers are forged of 5/8 in hex, high-carbon steel. Claws are hardened and tempered for strength and long life. Blue, rust-resistant powder-coated finish.- $18.51
- $18.51
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 505M Hammer, 24 oz Head, Rip Framing, Straight Claw, Milled Head, Steel Head, 17 in OAL
Available with either smooth or milled face, this framing hammer sets the industry standard for appearance and balance. Top quality white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $38.69
- $38.69
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 57021 Nail Puller, 7-3/4 in L, Flat Claw Tip, Steel, Black, 1/2 in Dia, 2 in W
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.- $15.86
- $15.86
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 57027 Nail Puller Bar, 10-1/2 in L, Steel, Black, 1 in Dia, 3 in W
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant finish.- $17.90
- $17.90
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 57030 Nail Puller, 12 in L, Flat Claw Tip, Steel, Black, 3/4 in Dia, 3 in W
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.- $22.33
- $22.33
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 57036 Nail Puller, 14-1/4 in L, Flat Claw Tip, Steel, Blue, 1 in Dia, 3 in W
Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.- $24.76
- $24.76
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 60202 Replacement Handle, 16 in L, Wood, For: 20 oz Rip Such as Vaughan 999L and 999ML
Made from second growth hickory, machine-gauged to accurate tolerances, then double sanded buffed and lacquered for maximum hand comfort. Each handle comes with the required accessories needed for proper application to the tool head.- $10.64
- $10.64
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 606M Hammer, 28 oz Head, Rip Framing, Straight Claw, Milled Head, Steel Head, 18 in OAL
An extra-heavy framer designed to provide excellent overall balance. Top quality white hickory handle is triple-wedged. Milled face. Rust-resistant powder coat finish.- $42.56
- $42.56
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 61242 Replacement Handle, 17-1/2 in L, Wood, For: 22 to 24 oz Claw Hammers Such as Vaughan 505 and 505M
Made from second growth hickory, machine-gauged to accurate tolerances, then double sanded buffed and lacquered for maximum hand comfort. Each handle comes with the required accessories needed for proper application to the tool head.- $11.22
- $11.22
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 61282 Replacement Handle, 18 in L, Wood, For: 28 to 32 oz Claw Hammers Such as Vaughan 606M and 707M
Vaughan Replacement Handle, Supreme, Wood, 18 in L, Suitable for: 28 to 32 oz Claw Hammers Such as Vaughan 606M and 707M, Includes: (1) Wood Wedge, (2) Steel Wedges- $11.34
- $11.34
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 64171 Replacement Handle, 17-3/4 in L, Wood, For: 28 oz RB Rigbuilder
Handle comes with the required wedges, rivets or epoxy needed for proper application to the tool head.- $15.22
- $15.22
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 64301 Replacement Handle, 16-1/2 in L, Wood, For: CF2/CF2P 19 oz California Framer
Machine gauged to accurate tolerances. Double sanded buffed and lacquered for maximum hand comfort. Each handle comes with the required accessories needed for proper application to the tool head.- $15.00
- $15.00
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 707M Hammer, 32 oz Head, Rip Framing, Straight Claw, Milled Head, Steel Head, 18 in OAL
An extra-heavy framer designed to provide excellent overall balance. Top quality white hickory handle is triple-wedged. Milled face. Rust-resistant powder coat finish.- $44.64
- $44.64
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 9 Hammer, 10 oz Head, Rip, Small, Steel Head, 11 in OAL
A beautifully balanced small hammer, the #9 is ideal for cabinet making and finishing work. Top quality white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $22.38
- $22.38
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 99 Hammer, 16 oz Head, Rip, Smooth Head, Steel Head, 13 in OAL
The 16 oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in...- $28.73
- $28.73
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 999 Hammer, 20 oz Head, Rip Framing, Smooth Head, HCS Head
The 20 oz "999" Series hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels...- $30.89
- $30.89
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 999L Hammer, 20 oz Head, Rip Framing, Smooth Head, HCS Head
Available in two lengths, with either smooth or milled face, its superb balance and comfortable grip make this hammer a favorite of tradesmen. Top quality, white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $31.47
- $31.47
- Unit price
- per
-
Vendor: MARSHALLTOWN
Vaughan 999ML Hammer, 20 oz Head, Rip Framing, Milled Head, HCS Head
Available in two lengths, with either smooth or milled face, its superb balance and comfortable grip make this hammer a favorite of tradesmen. Top quality, white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $35.11
- $35.11
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.