Senco Hammer Stapler, Magazine Capacity: 168, Crown Width: 7/16 in, Leg Length: 3/8 in, Staple Material: Steel, Dimensions: 12-5/16 in L x 1-3/4 in H For Insulation, vapor barriers and felt roofing Drives 20 ga staples with 7/16 crown and 3/8 L

The A20 pneumatic hand nailer from SENCO is designed for installing pre-punched metal connection hardware with limited space. The magnetic tip keeps nails in place when fastening 2 to 7 in loose bulk nails through joist hangers, seismic and hurricane ties and rafter straps....

Designed with the power and speed to handle all finish and trim applications. The PC0968 comes with an oil-less pump and weighing in at only 38 lb, this compressor will not wear you down. Compact twin stack tank design Lightweight 38 lb Heavy-duty induction...

Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel-resistant. Reinforced braiding. Reusable hose guards and fittings. Flexible in all-weather Durable, oil- and fuel-resistant

Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel-resistant. Reinforced braiding. Reusable hose guards and fittings. Flexible in all-weather Durable, oil- and fuel-resistant

Lightweight, reinforced polyurethane air hose. Non-marking, will not scuff painted walls. Flexible even at cold temperatures. Durable, abrasion, oil and fuel-resistant. Reinforced braiding. Reusable hose guards and fittings. Flexible in all-weather Durable, oil- and fuel-resistant

The PC1010 is ultra-quiet and ultra-light lube less pump compressor. Ultra-quiet 68 dBA Ultra-light 20 lb design Heavy-duty induction motor

At 20 lb, Senco's PC1010 is an ultra portable air compressor ideal for finish and trim projects, woodworking and DIY projects around the house. The 1/2 hp, heavy-duty induction motor with oil-free pump provides sufficient driving power up to 135 psi. Ultra quiet 68...

Senco's 1 gal finish and trim air compressor is designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra quiet operation makes this the ideal finish and D6 trim unit. The long-life induction motor and...

SENCO's PC1131 workhorse compressor generates 4.4 cfm which provides power for all-types of applications, from finish to framing. The oil-splash design and induction motor provides the durability expected for professional contractors. 4.3 gal capacity - ideal for framing, roofing, finish nailers and staplers Pump-up/recovery...

The SENCO PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer. Compact and powerful enough to drive 2 to 3-1/2 in bulk nails Magnetic nose with recessed nail slot holds nails stable for...

The SENCO PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer. Compact and powerful enough to drive 2 to 3-1/2 in bulk nails Magnetic nose with recessed nail slot holds nails stable for...

SENCO's 6 gal pancake air compressor is designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil-free pump allows for maintenance-free operation. High 2.8 scfm at 90 psi Oil-free...

Senco ProHead Collated Nail, Collation Type: Paper, Collation Angle: 34 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, Material Gauge: 11 ga, 0.12 in Dia, 3 in L, Steel, Hot-Dipped Galvanized

Constructed of durable, high-strength components, the PS15XP has been developed for extreme performance and longevity. The new drive track design allows for great control of the fastener and unrivaled driveability. Enhanced EZ-Clear™ latch allows for quick access to clear fasteners New drive track design...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

Senco Finish Nail, Collation Type: Angled Strip, Collation Angle: 20 deg, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Round, Material Gauge: 16 ga, 1-1/4 in L, Steel, Galvanized/Sencote, Suitable for: GT65RHA, FinishPro 33Mg, F-16A Nailers T-head, chisel point,...

Senco Finish Nail, Collation Type: Angled Strip, Collation Angle: 20 deg, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Round, Material Gauge: 16 ga, 2 in L, Steel, Galvanized/Sencote, Suitable for: GT65RHA, FinishPro 33Mg, F-16A Nailers T-head, chisel point,...

T-head, chisel point, galvanized finish.

Senco Finish Nail, Collation Type: Angled Strip, Collation Angle: 20 deg, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Round, Material Gauge: 16 ga, 2-1/2 in L, Steel, Galvanized/Sencote, Suitable for: GT65RHA, FinishPro 33Mg, F-16A Nailers T-head, chisel point,...

Fits Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Excellent FCN50, Duo-Fast FloorMaster 200-C and other L cleat nailers.

Fits Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Excellent FCN50, Duo-Fast FloorMaster 200-C and other L cleat nailers.

Fits Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Excellent FCN50, Duo-Fast FloorMaster 200-C and other L cleat nailers.

Fits Senco SHF15, SHF50, Bostitch M111FN, Portamatic 470, Excellent FCN50, Duo-Fast FloorMaster 200-C and other L cleat nailers.

Designed for the professional finish carpenter, the TN51P1P delivers the holding power necessary when installing large interior and exterior trim such as casing, paneling, cabinetry, and a wide variety of other finish applications. The tool is designed with convenient features such as SENCOs quick...

For use with Senco Fusion cordless nailers and DuraSpin 18 V lithium-ion tools. Reaches 80% in approximately 15 min. Battery charges even when "hot". Quick-release for easy battery charging. High-quality reliable cells Charges 80% in 15 min Longer storage life

Battery charger can be used interchangeably with Senco VB0155, VB0161 and VB0118 batteries. Quick charging system reaches 80% in just 15- 20 mins. Battery charge indicators display the charge status of your battery.

Battery charger can be used interchangeably with Senco VB0155, VB0161 and VB0118 batteries. Quick-charging system reaches 80% in just 15 to 20 mins. Battery charge indicators display the charge status of your battery.

Senco Pin Nail, Collation Type: Glue, Head Diameter: 0.0294 in, Head Type: Medium, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 21 ga, 0.029 in Dia, 5/8 in L, Steel, Suitable for: FinishPro 21LXP Medium Head Pinners Galvanized finish, chisel point, medium head 21...

Senco Pin Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.0294 in, Head Type: Medium, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 21 ga, 0.029 in Dia, 1 in L, Steel, Galvanized/Plain, Suitable for: FinishPro 21LXP Medium Head Pinner 21 ga pins...

Senco Pin Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.0294 in, Head Type: Medium, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 21 ga, 0.029 in Dia, 1-3/8 in L, Steel, Galvanized/Plain, Suitable for: FinishPro 21LXP Medium Head Pinner 21 ga pins...

Senco Pin Nail, Collation Type: Glued, Collation Angle: 0 deg, Head Diameter: 0.0294 in, Head Type: Medium, Point Type: Diamond, Shank Type: Smooth, Round, Material Gauge: 21 ga, 1-5/8 in L, Steel, Galvanized/Plain, Suitable for: FinishPro 21LXP Medium Head Pinners Galvanized finish, chisel point,...

Senco Pin Nail, Collation Type: Glued, Collation Angle: 0 deg, Head Diameter: 0.0294 in, Head Type: Medium, Point Type: Diamond, Shank Type: Smooth, Round, Material Gauge: 21 ga, 2 in L, Steel, Galvanized/Plain, Suitable for: FinishPro 21LXP Medium Head Pinners Galvanized finish, chisel point,...

Galvanized finish, chisel point, medium head. 21 ga pins offer significantly more holding power than 23 ga pins while leaving a much smaller indent than an 18 ga brad