Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the...

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the...

File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters....

The Crescent Nicholson half round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse-grade is ideal for use on concave, convex and flat surfaces. The two-sided files are rounded on 1 side and flat on the other,...

Crescent Nicholson Handy File, Profile Shape: Flat, Rectangular, Pattern Type: American, Cut Type: Double, Single, Edge Type: Cut-Edge, Safe-Edge, Steel Blade, 8 in L Blade, 11.63 in OAL Rectangular shape lets you smooth and sharpen straight surfaces File features one cut edge and one...

The Crescent rectangular axe files, have a double-cut side for faster material removal and a single-cut side for putting a fine edge on your axe. A dull tool makes work much more difficult, so use a file to sharpen your axes and other garden...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point. Edges set and cut for filing gullets between saw teeth Tempered, polished HCS blade

Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut® file pattern that are narrow chip breakers created by steep and angled serrations. Single cut on edges, rasp cut is 6 teeth per row for faster cuts, rectangular shape,...

For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers. For use on wood and soft metals

File card and brush. Especially for use on finer cut files. Two styles - file card for general cleaning of file teeth and file card/brush especially for use on finer cut files

Interchangeable cushion inserts designed to fit most popular files. Handle made of strong high impact material. Contoured to fit hand for straight, lathe and draw filing. Non-slip textured finish for easier grip. Includes four inserts. Interchangeable cushion inserts are designed to fit most popular...

Crescent Nicholson File Handle, Type B, Hardwood, 15/16 in Dia, 4-1/8 in L, Suitable for: 10 in Round, 8 in Square and Slim Files, 6 in Round and Taper, 4 in Mill, Flat, Hand, Half Round, Warding and Knife File, 7 in and 5...

Crescent Nicholson File Handle, Type C, Push-On Connection, Hardwood, 1-3/16 in Dia, 4-1/2 in L, Suitable for: 10 in Square and Slim File, 8 in Warding, Round and Taper File, 6 in Mill, Flat, Hand, Half Round, Warding and Knife File Made from close...

Crescent Nicholson Wooden File Handle, Type D, Hardwood, 4-7/8 in L, Suitable for: 8 Hand, Crosscut, 10 Hand, Half Round, Warding and Knife Made from close grain hardwood with wax finish Handles have strong nickel-plated metal ferrules

Crescent Nicholson File, Profile Shape: Flat, Rectangular, Pattern Type: American Tooth, Mill, Cut Type: Bastard, Single, Edge Type: Single, Steel Blade, 6 in L Blade, Ergonomic Handle, Handle Color: Natural Single-cut on sides and edges All sizes taper slightly in width

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage...

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage...

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage...

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild-steel, plastics and wood. The coarse-grade is perfect for use on concave, convex and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you...

Crescent Nicholson File, Half Round Profile, American Pattern, Bastard, Double Cut, Ergonomic Handle, Plastic Handle, 10 in Overall Length Rounded on one side and flat on opposite Rounded sides of all half-round bastard files are double-cut Flat sides of all half-round files are double...

Crescent Nicholson N File, Profile Shape: Flat, Pattern Type: American, Cut Type: Bastard, Double, Single, Ergonomic Handle, Plastic Handle, 8 in OAL Rectangular in cross section and taper slightly towards point in width Double cut on sides, single cut on edges

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage that are...

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage that are...

The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. Two square edges allow you to make grooves fixed at the same width...

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals. Single-handed mode changes for increased productivity Two lid organizers for small parts storage that are...

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point. Tape strap Sawcut jig blue carabiner bone handle, case oval script shield

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point. Tape strap Sawcut jig blue carabiner bone handle, case oval script shield

Crescent Nicholson File, Profile Shape: Round, Pattern Type: American Mill, Cut Type: Bastard, Single, Edge Type: Smooth, 10 in OAL

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is ideal for use on concave, convex and flat surfaces. The two-sided files are rounded on one side and flat on the other,...

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces. Rounded on one side and flat on opposite Rounded sides of all half-round bastard files are double-cut...

Half round shape and has file section and rasp section on both flat side and half round side. For the homeowner, home Craftsman®, boat builder and mechanic. Has the file section and rasp section on both flat side and half round side

The Crescent Nicholson flat double/single-cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to...

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point. Edges set and cut for filing gullets between saw teeth Tempered, polished HCS blade

The Crescent Nicholson triangle single-cut extra slim taper files with American pattern are ideal for filing gullets between saw teeth. The triangular shape makes accessing tight internal angles and squaring corners a breeze and the single-cut construction effortlessly smooths the edges of sheet metal....

Crescent Nicholson File, Profile Shape: Triangular, Pattern Type: American Taper, Cut Type: Single, 6 in L Blade

The Crescent Nicholson half-round rasp files are for trades workers with a bastard-cut texture for efficient material removal. The half-round shape with individually cut teeth is excellent at removing material from wood or soft metals. Attach any Crescent Nicholson handle to the tang for...

Crescent Nicholson Woodcraft Rasp, Profile Shape: Half Round, Pattern Type: American, Cut Type: Bastard, 1-1/4 in W Blade, Steel Handle, 8 in OAL

Solid high carbon steel, virtually unbreakable and tempered to provide hard edge with flexible back. Economy blade for sawing light to medium-hard materials. Tempered to provide hard edge with flexible back Specially hardened to induce toughness A good balance of wear resistance, mechanical shock...

Crescent Nicholson Bi-Metaloy NF1218 Replacement Hacksaw Blade, Teeth Type: Wavy, Teeth per Inch: 18 TPI, Cutting Edge Material: Molybdenum Alloy, HCS, Painted, 12 in L, 1/2 in W, 0.025 in Thick, Applicable Materials: Ferrous and Non-Ferrous Materials Tough flexible high carbon steel backing Lasts...

BOWSAW & HKSW BLADE STEEL 12IN

HACKSAW HI TENSION FRAME 10 IN

FILE CHNSAW RND SFT 8X7/32IN

CHISEL RASP SET 3 PC