Dremel Engraving Cutter, 1/32 in Dia, Shank Diameter: 1/8 in, Point Type: Inverted Cone, HSS, 1-1/2 in L, Applicable Materials: Fiberglass, Plastic, Wood Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics

Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Ball, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Use the sides of the cutter rather than the tip for effective cutting Use higher speeds for hard woods, slower...

Turn your Dremel® rotary tool into a powerful high-speed cutter. Create stylish designs on wood, fiberglass, ceramics, jewelry, soft metals and more. Our powerful, simple-to-use engraving cutters make it easy-to-express your creativity. Two cutters per pack. Use for fastening pressure-treated lumber to concrete and...

Dremel Cutter, 1/4 in Dia, Shank Diameter: 1/8 in, Point Type: Pear, 35,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Use the sides of the cutter rather than the tip for effective cutting Use higher speeds for hard woods, slower...

Dremel Cutter, 1/4 in Dia, Shank Diameter: 1/8 in, 25,000 to 30,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Appropriate for curved surfaces A versatile, high-quality cutter made of high-grade steel

Dremel Cutter, 5/16 in Dia, Shank Diameter: 1/8 in, Point Type: Round, 25,000 to 30,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Use the sides of the cutter for effective cutting A versatile, high-quality cutter made of high-grade steel

Turn your Dremel® rotary tool into a powerful high-speed cutter. Made of rugged, long-lasting steel, our high-speed bits are ideal for cutting through wood, plastic and soft metals. Makes shaping, hollowing, grooving, slotting and inlaying simple. Use the sides of the cutter for effective...

High-speed versatile, carving and engraving cutter. Made of high-quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter of 3/16 in (4.8 mm). Appropriate for curved surfaces A versatile, high-quality...

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8 in Dia (3.2 mm) bit. Appropriate for curved surfaces A versatile, high-quality cutter made of...

A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. Bit diameter of 7/32 in (5.6 mm). Appropriate for curved surfaces A...

The Stylo Plus offers the precision you expect from a Dremel rotary tool, packaged into a sleek, lightweight design. Crafted with the comfortable ergonomics of a pen, the narrow profile and soft grip of Stylo Plus allow creative users to etch, engrave, polish and...

It's a drill press tool holder and flex shaft holder all-in-one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing and the telescoping flex shaft holder extends to any height between 16 and 29 in. Articulating...

Dremel Cutter, 1/4 in Dia, Shank Diameter: 1/8 in, Point Type: Conical, 25,000 to 30,000 rpm, HSS, 1-1/2 in L, Applicable Materials: Plastic, Soft Metal, Wood Use the sides of the cutter rather than the tip for effective cutting Use higher speeds for hard...

The Dremel® 4000 variable-speed rotary tool kit offers the highest performance and most versatility of all Dremel® rotary tools. The increased strength of its motor and electronic feedback circuitry enables consistent performance at all speed levels. Ergonomics include a slim design that provides a...

Do it all with just one tool. The key to a ideal result is having maximum control over your project. The Dremel 4000 with interchangeable accessories and attachments will give you just that. The tool has a 360 deg soft grip for greater maneuverability...

The Dremel® 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel® rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. Dremel® 4000 can use all existing Dremel® rotary...

Dremel Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories A shank with a screw-like head used primarily to hold polishing bits and accessories High-quality component Works with many accessories

Ideal for light deburring, general cleaning and polishing in hard to reach places such as slotted surfaces. Long wearing nylon bristles. Can also be used for cleaning hard plastic such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal...

Ideal for light deburring, cleaning and polishing in hard to reach places such as slotted surfaces. Nylon bristles make it great for polishing silverware, jewelry and other precious metals. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs...

Dremel® sanding discs have a finer grit than Dremel® sanding bands and because they mount on a Dremel® 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from...

Dremel® sanding discs have a finer grit than Dremel® sanding bands and because they mount on a Dremel® 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from...

Dremel® sanding discs have a finer grit than Dremel® sanding bands and because they mount on a Dremel® 402 mandrel, they provide a flexible surface that allows sanding in contoured and hard-to-reach areas. Sanding discs work well on fiberglass and in removing rust from...

Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy-to-cut bolts or screws or make slots in rusted or stripped bolts and screws to allow...

The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver....

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Ideal for cleaning and removing rust and corrosion from items made of brass, copper, gold or other soft ferrous metals such as tools, door knobs,...

Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm. Sand with water to...

The Dremel® 4300 is the first Dremel® rotary tool to allow tool-less and collet-less accessory changes with the inclusion of the three-jaw chuck. The chuck accepts all Dremel® accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the...

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). Good for removing rust from metal surfaces...

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Can also use wire brushes to create an artistic effect on coarse grained wood Its shape makes it well-suited for cleaning flat surfaces and getting...

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components. Can also use wire brushes to create an artistic effect on coarse grained wood Its shape makes it well-suited for cleaning flat surfaces and getting...

Improve the grip for bits in our rotary tool line with a genuine Dremel® collet set. With the 480, 481, 482, 483 collets, plus a quick change collet nut, you can easily use a wide range of bits. Provides the optimal-grip for bits offered...

Dremel® accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel® chain saw sharpening attachment.

Dremel® chain saw sharpening stone is for use with Dremel® chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety. Precision ground abrasive stone...

Dremel Grinding Stone, Aluminum Oxide Abrasive, Arbor/Shank Size: 1/8 in, 35,000 rpm, Green, 7/32 in Dia, Suitable for: 3/8 in Pitch Chain Saw Precision ground abrasive stone for quick, easy sharpening of chain saw blades

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Flapwheels grind and polish flat or contoured surfaces Effective as finishing sander after heavy surface sanding and material...

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Flapwheels grind and polish flat or contoured surfaces Effective as finishing sander after heavy surface sanding and material...

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Flapwheels grind and polish flat or contoured surfaces Effective as finishing sander after heavy-surface sanding and material removal...

A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicone carbide abrasive and lubricant, eliminating the need for polishing compound. Easy-to-use and less messy, the 520-02 is ideal for high luster polishing....

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard to reach places, such as slots. Vinyl grips for added comfort

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard to reach places, such as slots. Vinyl grips for added comfort

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Vinyl grips for added comfort

Wheel tip for general-purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass. Vinyl grips for added comfort Use replacement blade 21-293 for standard cut, 21-393 for fine cut and 21-299 for half round

Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass. Vinyl grips for added comfort Use replacement blade 21-293 for standard cut, 21-393 for fine cut and 21-299 for half round

Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass. Vinyl grips for added comfort Use replacement blade 21-293 for standard cut, 21-393 for fine cut and 21-299 for half round

The Dremel® aluminum oxide grinding wheel features a high-quality industrial abrasive that's made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. 1/8 in shank. Use the 415 dressing stone to clean the surface of the wheel

Make the most of your Dremel rotary tools by using our innovative and extensive line of rotary accessories and attachments. Whatever your project, we've got the perfect solution for you. Dremel accessories fit inside your rotary tool to extend it's versatility. Whether you're looking...

Set contains mandrel, two 1/2 in felt polishing wheel, high-speed cutter, 1-1/4 in fiberglass reinforced cut-off wheel, aluminum oxide grinding stone, silicone carbide grinding stone, mandrel, nylon brush, 36 409 15/16 in emery cut-off wheel, 1/2 in drum sander, 1/2 in coarse sanding band,...

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Use on metals, castings, welded joints, rivets and rust A high-quality industrial abrasive Specially designed for working with conic surfaces

A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Use on metals, castings, welded joints, rivets and rust A high-quality industrial abrasive Specially designed for working with conic surfaces