For covering home entertainment wires, speaker cables, tv/video cabling and home office wiring. Self-adhesive backing, paintable. Contains 4 pieces of raceway, each 30 in long, two flat elbows, one inside elbow, one outside elbow, three couplings, one t-fitting.

Our new Flat screen TV cord cover kit makes it a snap-to hide wires. It's very easy-to install and can be painted to blend seamlessly into any wall. Need to add a component - no problem. Snap-off the cover, add the cables and snap...

Our flat screen TV cord cover kit makes it a snap-to hide wires. It's very easy to install and can be painted to blend seamlessly into any wall. To add a component, snap-off the cover, add the cables and snap the cover back on....

Hides and organizes loose cords and wire.

For making a 90 deg turn around an inside corner from wall-to-wall or wall-to-ceiling.

For making a 90 deg turn around an outside corner.

Hides and organizes loose cords and wire.

Wiremold Outside Elbow, Plastic, Ivory Provides 90 deg turn in a length of raceway Self-adhesive backing for easy installation

Wiremold Coupling Cord Cover, Plastic, Ivory

Corduct cord protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape. Organize and hide cords and cables easily. Cuts to any length with scissors or utility knife. Conceals wires and cords create a smooth,...

Corduct cord protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape. Organize and hide cords and cables easily. Cuts to any length with scissors or utility knife. Conceals wires and cords create a smooth,...

Corduct cord protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape. Organize and hide cords and cables easily. Cuts to any length with scissors or utility knife. Conceals wires and cords create a smooth,...

Corduct cord protector conceals wires and cords while creating a smooth, trip-free surface. Applies to any flooring surface with pressure-sensitive tape. Organize and hide cords and cables easily. Cuts to any length with scissors or utility knife. Conceals wires and cords create a smooth,...

The easy solution to running flat screen TV cables in-wall. For use with low voltage cables only, such as HDMI cable. Kit allows for neat and easy installation Kit has all parts and tools needed for installation Ideal for hiding low voltage cables such...

The easiest solution for running flat screen TV power and low voltage cables in-wall. Kit includes plug and play power harness and also allows you to run low voltage cables such as HDMI cables and other component cabling in wall in under 30 min....

CordMate cord channel is streamlined to blend with any decor. Great for concealing phone wires, lamp and extension cords. Ideal for family rooms or bedrooms. Self-adhesive backing makes it simple to install on a baseboard or wall. Paintable. Conceals electrical cords and low-voltage wiring...

CordMate Cord organizer is streamlined to blend with any decor. Great for concealing and organizing phone wires, cords and speaker cable. Perfect for family rooms or bedrooms. Self-adhesive backing makes it simple to install on a baseboard or wall. Streamlined to blend with any...

Especially suited for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring. Self-adhesive backing makes for easy installation. Stylish design complements any interior setting. Paintable.

For mounting phone, fax, cable and audio connections (not for power).

CornerMate cord organizers are ideal for concealing audio or home theater cords in corners. Peel and press installation is quick and easy. Cover reverses for your choice of concave or convex profile. Paint CornerMate to match your walls. Designed to work with CableMate™ and...

Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4 in x 4-7/8 x 1-3/8 in D.

Fits over existing single-gang outlet to feed power as the starting point for your system. 1 in D.

For installing dimmer switches as well as standard size switches and outlets. 1-7/16 in L x 1-3/8 in D.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4 in D.

For branching wire channel in two directions at 90 deg angles.

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. (Not a mounting bracket. Ceiling fans and fixtures over 10 lb must be mounted independently from circular fixture box.

For making 90 deg right or left turns on a flat surface.

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.

For making a 90 deg outside turn around a corner.

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.

Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5 ft L x 1-5/16 in W x 7/16 in H. Carries wire from starter box to downstream outlet boxes, switches and fixtures

Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5 ft L x 1-5/16 in W x 7/16 in H. Carries wire from starter box to downstream outlet boxes, switches and fixtures

Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4 x 4-7/8 x 1-3/8 in D.

For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4 in D.

For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures.

For branching wire channel in two directions at 90 deg angles.

For transitioning from non-metallic raceway to conduit. Hides and organizes loose cords and wires.

Fits over existing single gang outlet to feed power as the starting point for your system. 1 in D. Fits over existing single gang outlet to feed power as the starting point for your system

For making 90 deg right or left turns on a flat surface.

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.

Mounting components for NM1 wire channel, including screws and anchors, wire clips and joint cover.

Plugmold® multi-outlet strips deliver power where you need it. Simply mount, plug into an existing power source and you're done. Great for the home workshop. Ideal for invisible outlets beneath a kitchen cabinet. The easy way to add 6 to 10 outlets. Simply mount...

They don't just look tough. They are tough. Plugmold® tough power strips are easy to handle and easy to install. Genuine diamond-plate aluminum looks great on workbenches, in garages or anywhere you need to access up to 10 power outlets. Easy to handle and...

Wiremold V500 Raceway Wire Channel, 1 Channels, Metal, Ivory, 10 ft Length, 3/4 in Width, 17/32 in Height, Wall Mounting Carries wire from starter box to downstream outlet boxes, switches and fixtures

Accommodates 15 A (NEMA 5-15R) or 20 A (NEMA 5-20R) duplex devices in place of duplex grounding receptacle included. Cover has twist outs for 500 and 700 Series raceway on each end and sides. Twistouts on ends of box permit running raceway close to...

Cover accepts fan bracket device with mounting centers of 3-3/16 in (81 mm). Base has six mounting holes and 4-1/2 in trade size KOs. #10 mounting studs provided. Rated for fans and fixtures up to 50 lb.

For standard shallow switches and receptacles including single-gang combination devices. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.

For deep switches and receptacles. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.