TIRE GAUGE DIAL STEEL 4-140PSI

AIR BLOW GUN 150 PSI

BLOWGUN SAFETY W/EXTENSION

BLOW GUN KIT 120PSI 40CFM

1/4HX1/4NPT MALE HOSE BARB END

5/16HX1/4NPTMALE HOSE BARB END

3/8HX1/4NPT MALE HOSE BARB END

3/8HX3/8NPT MALE HOSE BARB END

BARB HOSE FEMALE FITTING

FEMALE BARB HOSE FITTING

1/4 HOSE BARB SPLICER

3/8 HOSE BARB SPLICER

BRASS PIPE COUPLING MALE

1/4"BRASS PIPE COUPLING FEMALE

1/4FIPX3/8MIP AIR CONNECTOR

DRAIN COCK BRASS MNPT 1/4IN

COUPLER BALL END ADAPTR 1/4MPT

1/4MX1/4F AIR LINE SWIVEL

COMPRESR AIR 1/4IN SAFETY VLVE

1/8IN AIRLINE PRESSURE GAUGE

GAUGE PRESS AIR LINE 0-160PSI

COMPACT AIR LINE FILTER

3/8"COMPACT MAN AIRLINE FILTER

CMPCT AIRLINE REGULATOR

3/8"COMPACT AIRLINE REG W/GAUG

1/4IN MINI REGULATOR

CMPCT AIRLINE LUBRICATOR

AIR TOOL OILER IN-LINE

3IN1 AIRLINE MANIFOLD

AIRLINE REGULATOR/GAUGE

REGULATR TOOL AT-HAND INLN AIR

AIR COMPRESSOR ACCESS KIT 19PC

HOSE REPAIR KIT 1/4IN

AIR TANK CONVERSION KIT

AIR LINE FLTR MNL POLCRB 4.4IN

Round rubber patches for radial tires.

Tru-Flate Tire Patch, Medium, Rubber, Dimensions: 3-1/4 in Dia, Suitable for: Radial Tires Round rubber patches for radial tires For DIY radial repairs Used for nail hole injuries in auto and light truck tires Medium round, 3 to 1/4 in Suitable for all vehicles...

Excellent for general-purpose use on passenger cars, vans and light trucks. Calibrated 10 to 50 psi in 1 lb. Units, 70 to 350 kPa in 10 kPa units and 0.7 to 3.5 bar in 0.1 bar units. Four standard valve caps included with retail...

For air and liquid filled tires. Includes special oiling and cleaning features to clean out corrosive fluids. Calibrated 5 to 45 psi in 1 lb units. For tractors, heavy equipment, farm and construction vehicles Calibrated 5 to 45 psi in 1 lb units, 40...

for use on dual wheels and other difficult-to-reach valves. Short enough to fit in your pocket yet has a wide enough range to handle both cars and trucks. Calibrated 20 to 120 psi in 2 lb units and from 160 to 880 kPa in...

Rugged zinc casting, with rubber bumper guard to protect against damage if dropped and easy-to read recessed sight glass. Replaceable valve assembly and gauging cartridge. Calibrated 10 to 120 psi in 2 lb increments

Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 psi, with up to 150 psi inlet pressure. Conforms to #1001 OSHA regulation. Epoxy finish. Convenient and easy-to-use

Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one-piece nozzle. Allows full line pressure to be used. Includes 1/4 in female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line...

Allows full line pressure to be used. Oil-resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Gives a leak-proof seal against oil passages, fuel lines and more. When air pressure is needed for cleaning.

Combination of a blowgun and the siphon spray nozzle. Barbed siphon inlet fits 1/4 in ID hose or tubing. Use for spray, cleaning engines, applying protective coating and more. Allows full line pressure to be used. Includes 1/4 in female NPT inlet. To comply...

Increased performance and yet still meets OSHA regulation 100-1 for 30 psi "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Complete with hang-up hook and 1/4 in NPT female inlet....

Interchangeable nozzles for cleaning and inflating. Complies with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 psi. Includes standard nozzle, tapered inflator nozzle and ball inflator nozzle. Complete, all-purpose blowgun with four...

Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy-duty die-cast body. Hang up hook and 1/4 in NPT female inlet included. Meets OSHA regulation 1001 for 30 psi "dead head" pressure. Inlet pressure rating of 150 psi....

Adjust from low air to a full volume flow. Recommended air pressure to 150 psi maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all industrial/Milton design 1/4 in coupler bodies. 1/4 in coupler bodies