Water Source Check Valve, 1-1/4 in Nominal, Brass Body, 200 psi Pressure, 180 deg F, Suitable for: Jet, Submersible and Centrifugal Pumps

Water Source Check Valve, 1-1/2 in Nominal, Media: Cold Water, Gas, Oil, Brass Body, 200 psi Pressure, Suitable for: Jet, Submersible and Centrifugal Pumps

Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi

Water Source Check Valve, 3/4 in Nominal, Media: Gas, Oil, Water, 2-3/4 in Length, 1-1/2 in Width, 1-1/2 in Height, Brass Body, 200 psi Pressure

Water Source Yard Hydrant Elbow, Nominal Size: 1 in, Barb x MPT Connection, Angle: 90 deg, 120 psi, Operating Temperature: 100 deg F, Brass

The 1 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

The 3/4 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. This hydrant tee meets federal low lead regulations.

The 3/4 in barbed x 3/4 in male NPT x 3/4 in barbed brass hydrant tee allows multiple flexible poly pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. The hydrant tee meets all federal low lead...

Water Source Coupling, Nominal Size: 1/2 in, Barb Insert Connection, Brass

Water Source Pool Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Measuring Range: 100 psi, Lens Material: Glass The pressure gauge measures water pressure in the pressure tank It has a 1/4 in lower connection Dark numbers are easy to read on the...

The pressure gauge measures water pressure in the pressure tank. It has a 1/8 in back connection. Dark numbers are easy to read on the gauge. Measures water pressure in well tank

The pressure gauge measures water pressure in the pressure tank. It has a 1/4 in lower connection. Dark numbers are easy to read on the gauge.

The 1 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 1/2 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 3/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 1 in male adapter with the rope loop connects flexible poly pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and...

The pitcher pump is made with cast iron for optimum strength. It has a rugged design for a long service life. This pump has a maximum lift of 25 ft. No lead Pitcher spout designed to hold pail for easy operation

The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. 40 psi). This switch is to be used with submersible well pumps or as a replacement switch....

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Pressure Switch, 115/230 V, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Steel Body, Gray, 40, 60 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pressure mark (e.g. 50 psi). If the pressure drops rapidly, the switch will automatically shut-off the pump....

The 1/2 in relief valve protects tank systems from pressure build-up. It is recommended for use on all submersible pumps or systems that build more than 75 psi. Solid brass design meets federal low-lead regulations Not for use with water heaters

This heat shrink splice kit comes with four clear tubes and four connectors. These tubes are designed to shrink around the electrical wire. The shrink kit works with #14, #12 and #10 ga submersible wire. Waterproof electrical connections Clear tubes with internal glue coverage...

This sump or sewage check valve prevents back flow to sump or sewage pumps. It will fit 2 in discharge pipes. The flexible couplers allow for easy installation. Low cost investment to prevent costly pump replacement

Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body

The sump check valve prevents back flow to sump pumps. It fits both pedestal and submersible sump pumps with 1-1/4 in or 1-1/2 in discharge. Easy to install, this check valve is constructed of rubber.

The expandable torque arrestor protects submersible pumps from damage when the pump starts. It is made of heavy-duty rubber. This torque arrestor can adjust to fit 4 to 8 in well casings. Protects submersible pumps from damage when pump starts and stops Molded PVC...

The 10 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and a snifter valve. Solid brass design meets federal low-lead regulations

The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve. Solid brass design meets federal low-lead regulations

Water Source Foot Valve, 1-1/4 in Connection, 200 psi Pressure, Brass Body, Includes: #8 Perforated Brass Screen Strainer

Water Source Foot Valve, 1-1/2 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

The 2 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The 3/4 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back....

Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC

Water Source Piggyback Float Switch, 115 V, Dimensions: 4 in L x 2.6 in W x 2.74 in H, Body Material: Rubber, Black, Suitable for: Pumps Working with 1/2 hp at 120 VAC and 1 hp at 230 VAC, Includes: Cable Tie

Water Source Pressure Gauge, 3/4 in Connection, Female Connection, Measuring Range: 0 to 100 psi, Dial Size: 2 in, Lens Material: Glass, Socket Material: Brass, Suitable for: 3/4 in Male Hose

Water Source Yard Hydrant, 1 in Inlet, FPT Inlet, 120 psi Pressure, Iron Head, Blue

Water Source Yard Hydrant Repair Kit, Includes: Head Set Screw, Packing Nut, Plunger Insert and Packing Plunger