Eazypower Drill Chuck, Chuck Size: 1/4 in, Steel, Keyed/Keyless Chucks: Keyless, Suitable for: 1/4 in Dia Drill Bit

For use with hand, electric and cordless drills. Adjustable thumb support. Hex shank of size 1/4 in.

Spring loaded with hex key to adjust drilling depth. Drills ideally centered holes in applications such as installing hinges, brackets, towel bars, cabinet hardware, drapery rods, window shades and blinds.

Spring loaded with hex key to adjust drilling depth. Drills ideally centered holes in applications such as installing hinges, brackets, towel bars, cabinet hardware, drapery rods, window shades and blinds.

Spring loaded with hex key to adjust drilling depth. Drills ideally centered holes in applications such as installing hinges, brackets, towel bars, cabinet hardware, drapery rods, window shades and blinds.

One-way screw remover or installer. Ideal for removing rounded or damaged nuts and bolts. Loosen set screw to adjust tip depth. Align and seat tip into screw head/bolt. Slide collar flush with surface, tighten set screw then apply pressure while removing or installing one-way...

One-way screw remover or installer. Ideal for removing rounded or damaged nuts and bolts. Loosen set screw to adjust tip depth. Align and seat tip into screw head/bolt. Slide collar flush with surface, tighten set screw then apply pressure while removing or installing one...

Turns any drill into an angle drill. Fits into drill chuck like you would use a drill bit. Use in hard to reach areas with drill bits, wire brushes, polishers and grinding discs. Completely sealed, never needs lubricating. Not for use in hammer drills....

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Eazypower 4-Way Chuck Key, Pilot Size: 1/4, 15/64, 17/64 in, Chuck Key Size: #1, #2, #3, #4, Suitable for: 3/8 and 1/2 in Capacity Drill Chucks

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Rounded nut, one-way screw remover is ideal for removing rounded or damaged nuts and bolts. Shank of size 1/4 in.

Eazypower Eazyload Quick-Disconnect

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

Bits can be used for both rotary and impact screwdriving tools. titanium-nitride coated drills.

The broken/damaged screw remover is extremely easy-to-use. Just set the drill to reverse to take out a screw when the Phillips®, Torx, Robertson®, Posidriv® or Tri-wing® screw is damaged. The product comes in five different sizes - #0, #1, #2, #3, #4. Simply select...

Isomax Magnetic Nut Setter, Drive Type: Hex, Drive Size: 1/4 in, Shank Type: Hex, Shank Length: 1/4 in, Molybdenum Steel, Chrome Vanadium, 1-5/8 in L Magnetic screw setter with 1-5/8 in L power tip, 1/4 in hex shank, tub of 50-pieces

Isomax Magnetic Nut Setter, Drive Type: Hex, Drive Size: 5/16 in, Shank Type: Hex, Shank Length: 1/4 in, Molybdenum Steel, Chrome Vanadium, 1-5/8 in L Magnetic screw setter with 1-5/8 in L power tip, 1/4 in hex shank, tub of 50-pieces

Isomax Nutsetter, Magnetic, Specifications: 1/4 in Hex Drive, 2-1/2 in Nutsetter Length, Steel, Dimensions: 2-9/16 in L

Isomax Nutsetter, Magnetic, Specifications: 5/16 in Hex Drive, 2-1/2 in Nutsetter Length, Steel, Dimensions: 2-9/16 in L

Isomax Magnetic Nut Setter, Drive Type: Hex, Drive Size: 3/8 in, Shank Type: Hex, Shank Length: 1/4 in, Steel, 3/8 in Dia, 2-9/16 in L

Isomax Magnetic Bit Holder with Sliding Finder, Drive Type: Hex, Drive Size: 1/4 in, 3-3/8, 5, 8, 12 in L

Isomax Screw Extractor Set, Number of Pieces: 5, Suitable for: 3/32 to 5/8 in Bolt Size, Rotary and Impact Screwdriving Tools, Includes: #1, #2, #3, #4 and #5 Screw Extractors Pre-drill hole, tap extractor in and turn counter-clockwise to remove screw Use tap or...

Isomax Tap and Die Ratcheting Wrench, #0 to 1/4 in Tap/Die, T Handle

Isomax Tap and Die Ratcheting Wrench, 1/4 to 1/2 in Tap/Die, T Handle

Isomax Tap and Die Wrench, #0 to 1/2 in Tap/Die, T Handle

Isomax Straight Flute Tap, SAE/Metric: SAE, Thread Type: NS, Thread Size: #4-36, Chamfer Type: Plug, Tungsten Steel

Isomax Straight Flute Tap, SAE/Metric: SAE, Thread Type: NC, Thread Size: #4-40, Chamfer Type: Plug, Tungsten Steel

Isomax Machine Screw Tap, SAE/Metric: SAE, Thread Size: #6-32, Thread Type: NC, Chamfer Type: Plug, Tungsten Steel, Suitable for: #36 Drill Bit