IPEX Pipe, Cellular Core, Nominal Size: 1-1/2 in, 1-1/2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS

IPEX Pipe, Cellular Core, Nominal Size: 2 in, 2 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS

IPEX Pipe, Cellular Core, Nominal Size: 3 in, 3 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS

IPEX Pipe, Cellular Core, Nominal Size: 4 in, 4 in Dia Outside, 3 ft L, Schedule Rating: SCH 40, ABS

IPEX Slip-Joint Nut, Washerless, Specifications: 1-1/2 in FPT, ABS, Suitable for: Trap Adapters

IPEX Drainway Pipe Elbow, Nominal Size: 1-1/4 in, Hub Connection, Angle: 90 deg, ABS, Black

The pipe may be used both above ground and under-ground and is made in Schedule 40 pipe dimensions in either sold wall or cell core composition. Sizes range from 1-1/4 to 6 in and a board range of ABS-DWV fittings are also provided by...

ABS-DWV (drain, waste and vent) piping has been successfully used in single family homes and general wood frame construction. Builders and contractors have enjoyed the durability, ease of installation and overall value of ABS in providing a plumbing drain system. The pipe may be...

Use a two-gang FSE box when installing switches or receptacles at the end of a conduit run. The 1 in hub can be converted for use with 3/4 or 1/2 in conduit by using the supplied reducer bushing.

Use a two-gang FSC box when installing switches or receptacles in a run of conduit. The 1 in hub can be converted for use with 3/4 or 1/2 in conduit by using the supplied reducer bushings.

Use a one-gang FSE box when conduit will terminate at the box. The 3/4 in hub can be converted for use with 1/2 in conduit using the supplied reducer bushing.

Use a one-gang FSC box when installing a switch or receptacle in a run of conduit. The 3/4 in hubs can be converted for use with 1/2 in conduit using the supplied reducer bushings.

Use a one-gang FSS box where multiple top or bottom hubs are required. The 3/4 in hubs can be converted for use with 1/2 in conduit using the supplied reducer bushings.

The one-gang F Series deep blank box is a deep box designed to be drilled on-site when using junction box adapters and conduit or strain relief connectors and more.

IPEX Conduit Adapter, Trade Size: 1/2 in, Female Connection, PVC, Gray, 1.4 in L

IPEX Conduit Adapter, Trade Size: 1-1/4 in, Female Connection, PVC, Gray, 2.1 in L

IPEX Conduit Adapter, Trade Size: 2 in, Female Connection, PVC, Gray, 2.9 in L

Kwikflex flexible non-metallic liquidtight Type B grey conduit is UL listed and CSA certified. Kwikflex is UL approved for direct burial applications and outdoor use as indicated in Article 356 of the 2002 NEC. UV protected and sunlight-resistant, Kwikflex is suitable for installation in...

Kwikflex flexible non-metallic liquidtight Type B grey conduit is UL listed and CSA certified. Kwikflex is UL approved for direct burial applications and outdoor use as indicated in Article 356 of the 2002 NEC. UV protected and sunlight-resistant, Kwikflex is suitable for installation in...

IPEX Conduit Body, PVC, 2 in OAL

IPEX Elbow, Trade Size: 1/2 in, Angle: 90 deg, Schedule Rating: SCH 80, PVC, Dimensions: 3 in L x 1.3 in W x 1.3 in H, MPT Connection, Gray, Includes: Metal Locking Ring

IPEX Meter Offset, Trade Size: 2 in, PVC, Gray, 4-1/2 in L

IPEX Terminal Adapter, Trade Size: 1 in, Male Connection, PVC, Gray, 1.8 in L

IPEX Terminal Adapter, Trade Size: 1-1/4 in, Male Connection, PVC, Gray, 1.9 in L

IPEX Terminal Adapter, Trade Size: 2 in, Male Connection, PVC, Gray, 2.8 in L

IPEX Entrance Cap, Hub Size: 1-1/4 in, PVC

IPEX Entrance Cap, Hub Size: 2 in, PVC

IPEX System 636 Flue Gas Vent Pipe, 2 in Dia Outside, PVC, Temperature Rating: 149 deg F, 10 ft L

IPEX System 636 Flue Gas Vent Pipe, 3 in Dia Outside, PVC, Temperature Rating: 149 deg F, 10 ft L

IPEX System 636 Pipe Tee, Nominal Size: 3 x 1-1/2 in, Hub Connection, Operating Temperature: 65 deg C, Schedule Rating: SCH 40, PVC Most commonly used as part of the exhaust vent pipe to collect condensate and direct it to a drain

IPEX System 636 Pipe Tee, Nominal Size: 2 in, Hub Connection, Operating Temperature: 65 deg C, PVC Most commonly used as part of the exhaust vent pipe to collect condensate and direct it to a drain

The condensate drain kit is designed to be used with a tee in the exhaust vent line to drain condensate through 1/2 in solid PVC pipe or flexible tubing.

An elbow is installed when a change of direction is needed in a vent line. The 90 deg elbow is a long radius elbow to reduce the restriction on airflow in the exhaust or intake line.

An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.

An elbow is installed when a change of direction is needed in a vent line. Two 45 deg elbows can be used in place of a 90 deg elbow if needed.

System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.

System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.

System 636 PVC flue gas venting system offers regular and increaser couplings to help meet manufacturers recommended installation practices.

The T access fitting is used as an access point for pulling cable where multiple changes in cable direction is required. Access fitting are used for acute changes in wire direction

IPEX Conduit Cement, Net Content: 475 mL, Can, Liquid, Odor/Scent: Ketone, Compositions: Tetrahydrofuran, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Flash Point: -5 deg C, Evaporation Rate: 6, Vapor Pressure: 145 mmHg, Vapor Density: >1, Specific Gravity: 0.9 to 1, Applicable Materials: PVC

IPEX Conduit Cement, Net Content: 125 mL, Can, Applicable Materials: PVC

Kraloy Pull Elbow, Trade Size: 3/4 in, Schedule Rating: SCH 80, PVC, Dimensions: 3 in L x 2 in W x 2 in H, Hub Connection, Gray, Includes: 1/2 in Reducing Busher, Gasket and Cover

Used to provide a branch supply line from a main line. Conforms to ASTM D2466.

Xirtec Pipe, Nominal Size: 4 in, 10 ft L, Bell Connection, Schedule Rating: SCH 40, PVC, White

Xirtec 140 Pipe Plug, Nominal Size: 1/2 in, MPT Connection, 150 psi, Operating Temperature: 73 deg F, Schedule Rating: SCH 40, PVC, White, 7/8 in L

Bushings are used to reduce the size of pipe connecting to a fitting. This one is solvent welded to a fitting socket and used to connect to a smaller MPT fitting.

IPEX vinyl process piping systems a complete line of pipe, fittings, flanges, strainers and valves to meet all your process system requirements. IPEX developed the Xirtec®140 (PVC) and Corzan® (CPVC) systems to meet industry demands for a complete pipe, Valves and Fittings (PVF) package...