Sand, scrape, chip and more with the Skil 20 V brushless oscillating multi-tool kit. Its 3.6 deg oscillating angle delivers high-performance cutting, sanding and scraping and it easily transitions between tasks like scraping for carpet and flooring removal, cutting drywall to install electrical outlets...

Bosch Daredevil Auger Bit Set, Self-Feed, Specifications: Hex Shank, HSS, 3 Piece, Includes: (1)5/8 x 7-1/2 in, (1) 3/4 x 7-1/2 in, (1) 1 x 7-1/2 in Auger Bit Reinforced tip withstands nail hits Reamer edge improves entry and exit-hole quality Dual cutting edges...

PTBL PWR STATION W/AC OLT 100W

Skil PWRCORE 20 Brad Nailer Kit, Tool Only/Battery Included: Battery Included, Battery Voltage: 20 V, Battery Capacity: 2 Ah, Magazine Capacity: 105 Nails, Nail Gauge: 18 ga, Fastener Type: Nail, Fastener Size: 5/8 to 2-1/2 in L, Includes: 18 ga Brad Nailer, Skil 2...

BATTERY PK LI-ION 2YR WARR 6AH

The MX FUEL™ Battery Charger is designed to reduce downtime and increase productivity by charging MX FUEL™ CP203 Batteries in 45 minutes and MX FUEL™ XC406 Batteries in 90 minutes. It features REDLINK™ Intelligence to monitor cell voltage, temperature, and charge status, optimizing performance...

Our MX FUEL™ CARRY-ON™ 3600/1800 W power supply provides the excellent temporary power for the job. You can power more on-demand with efficient, quiet and portable power anywhere. The portable power supply provides 3600 peak W, 1800 continuous W of pure sine inverter energy,...

Skil Miter Saw, Power Supply: 120 V, Maximum Miter Angle: 45 deg, Maximum Bevel Angle: 90 deg, 4800 rpm, Cutting Capacity: 2 x 12 in, Blade Diameter: 10 in

The Bosch drilling and driving mixed bit set features driver and drill bits for all-in-one convenience. This set also comes with a variety of accessories to help solve general drilling and fastening tasks. The included driver bits are designed to lessen damage to the...

The Bosch drilling and driving mixed bit set features driver and drill bits for all-in-one convenience. This set also comes with a variety of accessories to help solve general drilling and fastening tasks. The included driver bits are designed to lessen damage to the...

The Bosch drilling and driving mixed bit set features driver and drill bits for all-in-one convenience. This set also comes with a variety of accessories to help solve general drilling and fastening tasks. The included driver bits are designed to lessen damage to the...

OSC SCRAPER KIT RIGID&FLEXIBLE

OSC MULTI-TOOL KIT GROUT&TILE

OSC BLADE KIT MULTI-TOOL UNIV

OSCILLATING BLADE MT 2-3/4X4.5

OSC BLADE SET MULTI-TOOL 2-3/4

OSC BLADE KIT MULTI-TOOL 1-1/4

OSC BLADE SET BI-MTL FLUSH CUT

OSC BLADE SET MT FINE WOOD CUT

POCKET HOLE JIG KIT 1-GDE NYLN

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

A convenient multi-purpose hole saw for general contractor cutting applications. Attached 7/16 in pass-through shank arbor is a time saver. Cutting depth is 1-1/2 in and requires 4-5/16 in pilot drill. Positive rake teeth for more aggressive cutting Deeper gullets for better chip clearance...

HOLE SAW HSS 4/6TPI 4 X 3/8IN

HOLE SAW HSS 4/6TPI 3-1/2X3/8

HOLE SAW HSS 4/6TPI 3-1/4X3/8

HOLE SAW HSS 4/6TPI 3-1/8X3/8

HOLE SAW HSS 4/6TPI 3 X 3/8IN

HOLE SAW HSS 4/6TPI 2-7/8X3/8

HOLE SAW HSS 4/6TPI 2-3/4X3/8

HOLE SAW HSS 4/6TPI 2-5/8X3/8

HOLE SAW HSS 4/6TPI 2-1/2X3/8

HOLE SAW HSS 4/6TPI 2-3/8X3/8

HOLE SAW HSS 4/6TPI 2-1/4X3/8

HOLE SAW HSS 4/6TPI 2-1/8X3/8

HOLE SAW HSS 4/6TPI 2-1/16X3/8

HOLE SAW HSS 4/6TPI 2 X 3/8IN

HOLE SAW HSS 4/6TPI 1-7/8X3/8

HOLE SAW HSS 4/6TPI 1-3/4X3/8

HOLE SAW HSS 4/6TPI 1-5/8X3/8

HOLE SAW HSS 4/6TPI 1-1/2X3/8

HOLE SAW HSS 4/6TPI 1-3/8X3/8

HOLE SAW HSS 4/6TPI 1-5/16X3/8

HOLE SAW HSS 4/6TPI 1-1/4X3/8

HOLE SAW HSS 4/6TPI 1-3/16X3/8

HOLE SAW HSS 4/6TPI 1-1/8X3/8

HOLE SAW HSS 4/6TPI 1-1/16X3/8