Bosch Speed Clean™ drill bits are built using a solid piece of steel with a dust channel milled to Bosch specifications to extract dust while drilling, creating 25% greater drilling speed. The dust extraction bit system saves time, saves money and produces 90% less...

The Bosch SDS-plus® Bulldog™ Xtreme rotary hammer bit provides 4X life in concrete with rebar, due to its 100% full-carbide tip design and proprietary diffusion bonding technology. Diffusion bonding's high-heat, high-pressure solid state welding produces an incredibly strong bond. In internal tests, these bits...

Bosch BlueGranite Turbo™ Carbide hammer drill bits deliver 5X life and 2X speed over standard masonry bits, resulting in increased on-the-job productivity. This impact-rated bit has been redesigned with a hex shank and it is designed for use in today's higher torque hammer drills...

BIT INSERT TORX T15 1IN CD

INSERT BIT T20 X 1IN

2-PACK FUEL ROD

Makita's Reciprocating Saw (model JR3051T) delivers superior power and performance with less vibration. The JR3051T is powered by a 12 A motor with electronic speed control to maintain constant speed under load. The JR3051T has a long 1-3/16 in stroke for faster cutting with...

Ideal for electrical fasteners. Absorbs more torque. Includes #1 and #2 insert bits.

Impact duty ECX driver bits are engineered for extreme durability and long-life. ECX driver bits are a combination of Phillip's, square recess and slotted tips designed for great grip to eliminate rounding out fastener heads. Made from proprietary steel and heat-treated to control hardness...

Milwaukee SHOCKWAVE™ Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30X longer life and absorbs 3X more torque vs other impact...

Milwaukee SHOCKWAVE™ Impact Duty driver bits are engineered to be the most durable, most fitting driver bits on the market. The optimized SHOCKZONE geometry is unique for each tip-type to provide up to 30x longer life and absorbs 3X more torque vs other impact...

Variable depth gullets provide more efficient chip clearance, 4/6 variable pitch teeth for reduced noise and improved performance. Electron beam weld for stronger, longer lasting teeth. Variable depth gullets provide more efficient chip clearance 4/6 variable pitch teeth for reduced noise and improved performance...

Carbide tip used to drill pilot holes when installing anchors or 3/16 in tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion-resistance.

For use with Pro Fit premium deck screws and other screws where a star drive bit is needed. 3 Power bits per pack. Premium quality steel. Fits into a drill chuck or quick change adapter, 1/4 in hex shank. High strength hardened carbon steel...

The Bosch 11335K jack breaker hammer delivers 22 ft-lb of impact energy for the ideal material removal rate in class, impressive for a tool that weighs just 38 lb providing 1300 bpm, this 15 A tool has all-metal housing, metal tube and case and...

General-purpose cutting in hard materials with a high-speed, masonry or low HP walk behind saw, use for dry or wet cutting. Good quality diamond and good cutting value

High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length. 118 deg chisel point tip is ideal for general-purpose applications Engineered with premium HSS in...

Kreg® zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote™ and stainless screw varieties.

Kreg® zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote™ and stainless screw varieties.

Blue-Koteâ„¢ screws feature three anti-corrosion layers, making them the ideal choice for a wide variety of indoor and outdoor projects. Blue-Koteâ„¢ screws provide rust resistance up to 400% greater than zinc-plated screws and work with pressure-treated material.

Kreg® stainless screws are specially designed for maritime applications, excessive exposure to water and other exceedingly corrosive environments, such as ACQ-treated lumber. If you're looking for the excellent in rust-prevention, this is your solution.

Kreg® zinc screws are a good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection and serve as an affordable alternative to our more protective Blue-Kote™ and stainless screw varieties.

Gator 5 in random orbit sanding discs provide great finishing results and good value. These red resin discs are specifically designed for power tool use as they resist heat build-up and humidity for longer life. Quick-to-install and remove Heavy-duty designed for power tool sanding...

The DWE304 reciprocating saw has a powerful 10 A motor with a variable-speed trigger that provides up to 2800 spm with a 1-1/8 in stroke length for fast cutting. Features a keyless, lever-action four-position blade clamp for quick and easy blade changes in four-directions...

Empire Cutting Guide, Aluminum, 98 in Length, 2-1/2 in Width, Includes: (2) Rails, (2) C-Clamps and Joiner Plate Heavy-duty aluminum rails for durability, extendable to 98 in Quick to assemble connector makes it a snap to set-up Can be used with circular saw, jig...

High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a...

High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a...

Gator aluminum oxide sanding belts are designed to fit the most popular portable belt sanders offered today. These industrial quality belts have long set the standard for quality and value. From the durable red resin bonding system, it resists heat build-up and humidity for...

Diamond Products Electric Tile Saw, Amp Rating: 15 A, Blade Diameter: 7 in, Ripping Capacity: 17 in, Arbor Size: 5/8 in, 6000 rpm, Cutting Depth: 2-1/4 in, Cutting Type: Diagonal, Includes: 45 deg and 90 deg Rip Guide/Miter Blocks, Blade, Saw Type: Portable, Small...

Gator red resin fiber discs are designed for use on right angle grinders, using a 7 in backing pad to grind wood, metal, fiberglass and painted surfaces. The high-quality abrasives along with the speed of the machine make Gator fiber discs ideal fast stock...

Designed for grinding angles of 20 to 25 deg, DeWALT-type 29 HP flap discs quickly remove material with aggressive grinding action. Featuring zirconia grit, which removes material 3X fast than fiber resin metal sanding discs, each disc is packed with a premium abrasive cloth...

For removal of defective tile grout. Also for cutting slots in plaster, porous concrete and similar construction materials and for cleaning and reworking planked deck joints. Not suitable for very hard epoxy or cement grouts. The economical alternative to diamond blades. Ideal for working...

High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a...

Vulcan Drill Bit, Short, 1/8 in Dia, Shank Type: Straight, Point Type: Split, Point Angle: 135 deg, HSS, 2-3/4 in OAL, Applicable Materials: Ferrous Metal, Non-Ferrous Metal

High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a...

Designed for heavy-duty professional use, the SwitchBlade™ 10 blade replacement kit includes 10 blades, two feed screws, two set screws and a hex wrench. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

BLADE JIGSAW CARBON LINEAR 3IN

HSS, milled teeth for cutting very thin metal less than 1/16 in. Precision ground plier nose-grip Fully hardened teeth for cutting ferrous and non-ferrous metals, aluminum and sheet steel

HOLE SAW QC T2 152MM 6IN

WHEEL CUT/GRIND DIAMD 7X7/8IN

LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel. METALMAX™ delivers 1000 or more...

LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel. METALMAX™ delivers 1000 or more...

BLADE RECIP BIMETAL 4IN 6TPI

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Used in repetitive metal drilling with portable drills or stationary drill press. Jobber length. Titanium Nitride (TiN) coating resists heat and friction, providing up to 6X longer life than standard high-speed...

High-speed M-2 steel bit drills exact size hole for tapping; use where non-fractional sized holes are required in automotive, MRO, portable drill or stationary drill press applications. Jobber length. 118 deg chisel point tip is ideal for general-purpose applications Engineered with premium HSS in...

For cutting metal in small places. Fits pencil or die grinders. Fiberglass reinforced. When you want to cut, grind or sharpen almost anything.

For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.

44602 universal #5R, 0.038 in W x 0.016 in THK, 12.5/9 reversible TPI, reverse tooth blades for a smooth, splinter-free finish on top and bottom surfaces. Eliminates tear-out on birch and maple plywood. For fret sawing hard wood to 1/2 in and soft wood...

Olson Pin End Blade Assortment, Regular Teeth, 5 in Length, Applicable Materials: Hardwood, Softwood, Plywood, MDF, Particle Board, Suitable for: Sears Craftsman, Penn State, Delta, Ryobi 15 in and 16 in Scroll Saws, Includes: (1) 41101 Regular Tooth, 0.1 in W x 0.018 in...

Olson Scroll Saw Blade, Skip Tooth Teeth, 11.5, 5 in Working Length, Carbon Steel, Smooth, 5 in Length, 0.05 in Width, 0.02 in Thickness, Applicable Materials: Metal, Plastic, Wood