BLADE RECIP SAW 6IN 14/18TPI

An exclusive coating and preparation process provides DeWALT® 2X long life metal cutting reciprocating saw blades with twice the life of standard DeWALT® and competitive metal-cutting blades. A unique design provides efficient cutting and extra-durable blades helps to prevent bending and breakage. Ideal for...

An exclusive coating and preparation process provides DeWALT® 2X long life metal cutting reciprocating saw blades with twice the life of standard DeWALT® and competitive metal-cutting blades. A unique design provides efficient cutting and extra-durable blades helps to prevent bending and breakage. Ideal for...

Durable, compact and functional storage solution for bits, hole saws and other common accessories. Two magnets on top of the lid allow users to adhere the case to any ferrous material and the rubber bumpers prevent the case from sliding. Case conveniently fits into...

PRESSURE WASHER HOUSE SDG GAL

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel A high-speed cutter made of tungsten carbide, the hardest material next to diamond Use higher...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel A high-speed cutter made of tungsten carbide, the hardest material next to diamond Great for...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel Made of tungsten carbide, the hardest material next to diamond Shapes, smoothes or grinds especially...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel A high-speed cutter made of tungsten carbide, the hardest material next to diamond Use higher...

Dremel Cutter, 1/8 in Dia, Shank Diameter: 1/8 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel A high-speed cutter made of tungsten carbide, the hardest material next to diamond A versatile,...

Dremel Cutter, 3/32 in Dia, Shank Diameter: 1 in, 35,000 rpm, Tungsten Carbide, 1-1/2 in L, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel A high-speed cutter made of tungsten carbide, the hardest material next to diamond Use higher...

Replaceable bit for the 290 Dremel® (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. Designed for normal engraving applications Ideal for dozens of hobbies and crafts Create fine lines to deep grooves Carbide point for the...

New Precision Shear™ Forstner bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for...

Gator aluminum oxide sanding belts are designed to fit the most popular portable belt sanders offered today. These industrial quality belts have long set the standard for quality and value. From the durable red resin bonding system, it resists heat build-up and humidity for...

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip...

With this nailing system, you'll have the job done in no time. Heavy-duty jobs require a heavy-duty nailer. That's why the pros turn to the proven performance, durability and driving power, only a Paslode pneumatic framing nailer can provide. When used with Paslode nails,...

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip...

Gator red resin fiber discs are designed for use on right angle grinders, using a 7 in backing pad to grind wood, metal, fiberglass and painted surfaces. The high-quality abrasives along with the speed of the machine make Gator fiber discs ideal fast stock...

High-performance aluminum oxide grain for long-life and fast cutting. High grain concentration for aggressive cutting action and smoother running wheels. Proprietary material mix ensures durable long-life wheels. 7 ft 64 in blade thickness, type 1, A24T grit. High-performance aluminum oxide grain for long-life and...

DEWALT Air Line Splitter with Regulator, Quadraport, Specifications: 4-Outlet Factory tested to assure leak-free operation 4 universal push-to-connect 1/4 in body couplers for ease of operation Liquid filled gauge for durability and more accurate reading closer to job site High-flow regulator for increased performance...

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Used in repetitive metal drilling with portable drills or stationary drill press. Jobber length. Titanium Nitride (TiN) coating resists heat and friction, providing up to 6X longer life than standard high-speed...

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability. Creates...

Wave style core enhances the cutting speed, continuous rim turbo style for a smooth cut in wet or dry cuts with an electric circular saw or right-angle grinder. Includes 5/8 in bushing. Fast cutting. Wavy core enhances cutting speed Continuous rim turbo style for...

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip...

High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. Remove the eraser cap to replace lead...

Use to enlarge holes and create accurate pilot holes for easier hole cutting. With a split point tip, the self-centering arbor penetrates quickly with less walking than standard arbors. Hardened carbon steel construction for strength. Use for enlarging holes Starts on contact, split point...

Drill, countersink and counter bore in one step with DeWALT® countersinks. Each 4-cutter, tapered countersink delivers great speed with a professional finish. Ideal for both soft and hard woods. Replacement tapered bits are available. Drill, countersink and counterbore in one step Replacement tapered bits...

Our Milwaukee® M12 Cable Stapler delivers unmatched stapling performance in the most compact battery powered solution leading to a faster, more efficient rough in process. Our compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or...

Our Milwaukee® M12™ cable stapler delivers unmatched stapling performance in the most compact battery-powered solution leading to a faster, more efficient rough-in process. Our compact, lightweight design provides users with access to tight stud bays and improved ergonomics when stapling overhead or during difficult...

CART BREAKER STL TUBE FLT TIRE

Milwaukee® Shockwave™ Impact-duty™ insert magnetic nut drivers are engineered for extreme durability and up to 10X life. Made from proprietary steel and heat-treated to control hardness, the Shockwave™ impact-duty magnetic nut drivers feature a powerful magnet allowing for a secure grip and unyielding bit...

Our Pruning SAWZALL® Blades feature extra deep gullets for faster cutting. The Milwaukee® reciprocating saw pruning blade clears limbs, branches and green wood with five induction hardened teeth per inch, providing long blade life. Our pruning saw blades have unique fleam ground teeth for...

Our Pruning SAWZALL® Blades feature extra deep gullets for faster cutting. The Milwaukee® reciprocating saw pruning blade clears limbs, branches and green wood with five induction hardened teeth per inch, providing long blade life. Our pruning saw blades have unique fleam ground teeth for...

Ideal for sharpening, cutting, grinding, rust removal and more this 4-/2 in small angle grinder can stand up to tough jobs. A two-position side handle provides extra comfort and control while you work. Milwaukee® brushless motor - optimized for efficiency, this motor delivers more...

BIT DRILL REDUCE SHANK 13/32IN

5% cobalt and heavy-duty web construction for higher heat and abrasion resistance, strength and durability. Split point begins drilling immediately, minimizing bit walk in applications such as heavy-duty abrasive alloy metal drilling on hardened steel. Jobber length. Standard cobalt bit with 3/8 in reduced...

Blades are bi-metal, with a long cutting life. Used for fast cuts and most popular cutting applications. Includes one 9 in 6 TPI, nail embedded wood cutting blade, five 6 in 6 TPI nail embedded wood cutting blades, one 8 in 18 TPI metal...

Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes. Fits 3/8 in and larger drills and drill presses. Irwin Marples forester bits drill clean and precise flat bottomed holes and pocket holes quickly and easily Tempered, polished HCS blade Cutting...

Tru-Cut LongBoys Drill Bit, Extra Length, 1 in Diameter, 6-3/8 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 11 in Overall Length

The Dremel® 160-piece multi-purpose accessory set offers a breadth of high-quality accessories providing a complete kit to get you started with your Dremel® rotary tool. The kit includes the patented EZ Lock™ accessory system with the EZ Twist™ nose cap wrench, EZ Lock mandrel...

Dremel Rotary Tool Bit, 3/16 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hardened Steel, Jade, Semi-Precious Stone, Wood Removes material quickly and easily Bits are covered with diamond particles

DIAMOND WH PNT CYLINDER

Dremel Rotary Tool Bit, 16/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hardened Steel, Jade, Semi-Precious Stone, Wood Removes material quickly and easily Bits are covered with diamond particles Use higher speeds for...

Dremel Rotary Tool Bit, 11/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hardened Steel, Jade, Semi-Precious Stone, Wood Removes material quickly and easily Bits are covered with diamond particles Use higher speeds for...

Dremel Rotary Tool Bit, 5/64 in Dia, Shank Diameter: 1/8 in, Point Type: Wheel, 25,000 rpm, 1-1/2 in L, Applicable Materials: Ceramic, Glass, Hardened Steel, Jade, Semi-Precious Stone, Wood Removes material quickly and easily Bits are covered with diamond particles

For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Remove the eraser cap to replace lead Bits are covered with diamond particles

Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip...

Irwin Turbo Point Drill Bit Set, Specifications: Conventional Point, 135 deg Point Angle, Right Hand Cutting Direction, Straight Shank, Steel, Black/Gold, Number of Pieces: 15, Includes: 1/16 in, (2) 5/64 in, 3/32 in, (2) 7/64 in, 1/8 in, (2) 9/64 in, 5/32 in, 3/16...

Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat-resistance for reduced tip loss, fits all SDS plus and Hilti TE-C rotary hammers. Fits all SDS-plus and Hilti TE-C...

Variable speed control dial (10,000 to 30,000 rpm) enables user to match the speed to the application. Smooth rack and pinion fine depth adjustment system for more precise settings. Slim and ergonomically designed body for increased comfort and control. Quick release cam lock system...