Carbide spear point with sharpened edges for in applications such as glass, mirror and ceramic. Cuts ideally round holes without chipping or breaking the material. All sizes 3/16 in and larger have three flats on the shank for a better grip on the drill...

Glass and Tile Drill Bit Set includes 1/8 in, 3/16 in, 1/4 in and 5/16 in bits. All sizes 3/16 in and larger have 3 flats on the shank for a better grip on the drill chuck. Provides smooth, accurate drilling in ceramic tile,...

HINGE BUTT TEMPLET KIT W/CASE

STAPLER FINISH KIT

PLANER KIT 3-1/4IN

TEMPLATE HINGE DOOR

HOLE SAW ASSORTMENT 5PC

BISCUIT PLATE JOINER NO 20

BISCUIT PLATE JOINER NO 10

TEE 1/4 FPT FITTING

BLADE RECIPROCATING 6IN 18TPI

OIL WINTER FOR AIR TOOL 4OZ

BIT DRILL GLASS/TILE 1/4IN

BIT GLASS/TILE 1/8IN

NIPPLE HEX 1/4INM-1/4INM

BLADE CIRC SAW 7-1/4 24T

Thin kerf, 0.071 in saw blade for portable corded saws. New heat vent/expansion slot design reduces vibration for longer life and straighter cuts. Construction-grade carbide teeth for longer life. Reinforced shoulder for added durability. Alternate top bevel, 20 deg hook angle. New and improved...

BIT DRILL REDUC SHANK 27/64 IN

Percussion Drill Bit Set includes 5 pieces, 1/8 - 3/8 in. Use for rotary percussion drilling in cement, brick, concrete block and stone. Premium carbide tips have negative tip angle geometry for rotary percussion drilling Sizes 3/16 in and larger have three flats on...

Starts the bit cleanly on uneven surfaces and bores smooth, flat bottomed holes. Fits 3/8 in and larger drills and drill presses. Irwin Marples forester bits drill clean and precise flat bottomed holes and pocket holes quickly and easily Tempered, polished HCS blade Cutting...

M2 HSS for strength, heat-resistance and wear-resistance in general drilling of wood, metal and plastic. The 3/8 in reduced shank fits all 3/8 in drills. Jobber length. Bit is constructed of M2 HSS for the excellent combination of strength, heat- and wear-resistance 3/8 in...

Irwin® nutsetters stand apart from the competition by combining unsurpassed magnetic power and high-performance materials to give you total control of the fastener. Lobular design reduces stripping damage by driving the fastener on the sides instead of forcing the corners to turn Makita® technology...

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability. Cuts rounded...

Aluminum housing with over-mold comfort grip and trigger. Tool oil required. 360 deg adjustable exhaust. 9-3/4 in L x 9-3/4 in H, weighs 5.4 lb. Operating pressure is 70 to 120 psig (4.8 to 8.3 bar). Contact actuation operation. Drives 11 ga (0.120 in),...

The DS342-AC is the ideal all purpose tool for driving a broad range of screws into a variety of materials. The variable speed high-torque motor is capable of speeds up to 2500 rpm, easily driving 1 in to 3 in screws into dense materials....

Blazing fast speed in a compact well balanced package provides the ultimate in performance for the most demanding professional drywall installer. Includes Senco's patent pending corner-fit indexing technology that allows placement of screws into tight places unreachable by any other auto-feed screwgun on the...

The JN91H1 is specifically designed for fastening pre-punched metal connection hardware to dense engineered lumber, like LVL. This small, compact metal connector nailer fits easily between rafters and joists, driving 1-1/2 in nails through joist hangers, seismic and hurricane ties and rafter straps. The...

Setting the new standard for class-leading power and tool durability, the NS20XP is the industry benchmark for construction staplers. The new drive track design allows for superior control of the fastener, providing unrivaled drivability. The NS20XP drives both 16 and 17 gauge, 7/16 in...

For the most demanding applications, the NS20BXP combines all of the features and benefits of the standard NS20XP while providing 20% more power. The NS20BXP drives both 16 and 17 ga, 7/16 in crown staples (1 to 2 in L). 20% more powerful than...

The variable speed 2500 rpm high-Torque motor of the DS242-AC provides the power for heavy-duty applications, such as metal framing, gypsum sheathing to steel and metal decking. The adjustable depth-of-drive locks in place to ensure consistent screw placement on each drive. Senco's patented corner...

Senco Cordless Auto-Feed Screwdriver, Tool Only/Battery Included: Battery Included, 18 V, Battery Capacity: 3 Ah, Chuck Size: 2 in, Includes: (2) 3 Ah Extended Life Batteries, Motor Type: Brushless, 1600, 2500 rpm, Battery Type: Lithium-Ion

Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life.

6GAL PANCAKE COMPRESS 150PSI

The DeWALT® DCN660 16 ga angled finish nailer drives 16 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWALT® 20 V Max Lithium-Ion battery the...

Weiler's Vortec Pro® flap discs are fast cutting professional-grade products using the same exacting standards as the Weiler performance line flap discs, but engineered to be cost-effective. Vortec Pro® abrasives are an economical choice for the construction trades, low volume production shops and the...

BIT DRL HMR 3/16IN 5-1/2IN

BIT DRL HMR 5/32IN 3-1/2IN

BIT DRL HMR 5/32IN 5-1/2IN

BIT DRL HMR 5/32IN 5-1/2IN

BIT DRL HMR 3/16IN 5-1/2IN

BIT DRIL MASONRY 5/32X3-1/2IN

BIT DRL HMR 3/16IN 3-1/2IN

BIT DRL HMR 3/16IN 3-1/2IN

BIT DRL HMR 3/16IN 4-1/2IN

BIT DRL HMR 5/32IN 4-1/2IN

Designed for grinding angles of 20 to 25 deg, DeWALT-type 29 HP flap discs quickly remove material with aggressive grinding action. Featuring zirconia grit, which removes material 3X fast than fiber resin metal sanding discs, each disc is packed with a premium abrasive cloth...

Designed for grinding angles of 20 to 25 deg, DeWALT-type 29 HP flap discs quickly remove material with aggressive grinding action. Featuring zirconia grit, which removes material 3X fast than fiber resin metal sanding discs, each disc is packed with a premium abrasive cloth...

HOLE SAW EXTSN 10INX3/8 CHUCK

Use with any chuck side drill 1/2 in and larger. Can be used as adaptor for Lenox Leader tool. Hardened carbon steel for strength

BIT MSNRY CARB TIP 5/8IN 12IN