BIT DRILL JOBBER HD 21/64IN

BELT SANDING 3X24IN 50GRIT

Thin kerf saw blade for miter saws and table saws. Used for crosscutting oak, pine, malamine, plywood and moulding. Alternate top bevel, .071" plate, .098" kerf, 15 degree hook angle.

Diablo Steel Demon Circular Saw Blade, 7-1/4 in Diameter, TiCo Cutting Edge, TCG Teeth, 70 Teeth, 5/8 in Arbor, 5800 rpm Speed, -5 deg Hook Angle, 0.071 in Kerf, Perma-Shield, Applicable Materials: Ferrous Metal

Genesis Battery, Battery Voltage: 20 V, Battery Capacity: 2 Ah Replacement battery pack for Genesis™ 20 V lithium-ion cordless tools

Genesis Rotary Tool, Tool Only/Battery Included: Battery Included, 8 V, 1300 mAh Battery, 1/8, 1/16, 3/32 in Chuck, 8000 to 18,000 rpm Speed, Includes: 8 V 1300 mAh Battery Pack, Charging Stand, 120 V Wall Adapter, 65-Piece Accessory Set - (4) Mandrels, (2) 3/32...

WRENCH IMPACT KIT LI-ION 20V

SCREWDRIVER LITHIUM-ION 8V

Genesis High-Speed Cut-Off Tool, Amp Rating: 3.5 A, 240,000 rpm Speed, Includes: 3 in Cut-off Disc, Arbor Wrench, Hex Key Cuts through straps, hangers, exhaust systems, sheet metal, pipes and more an essential auto-body repair tool Powerful 3.5 A motor and 24,000 rpm Uses...

Genesis Electric Shear, Amp Rating: 4 A, Cutting Capacity: 14 ga Aluminum, 18 ga Steel, 20 ga Stainless Steel, 0 to 2500 spm Strokes per Minute, 5-1/2 in Cutting Radius, Includes: Hex-Key Quickly cuts metal roofing, flashing and other sheet metal up to 14...

Genesis Drill, Amp Rating: 9 A, 1/2 in Chuck, Keyed Chuck, 6.5 ft Cord Length, Includes: Auxiliary Handle, Chuck Key with Holder, Rear Spade Handle, Gray 1/2 in metal keyed chuck accepts large diameter bits Powerful 9 A motor Variable speed trigger with dial...

SAW RECP VARI SPEED LI-ION 20V

Genesis High-Performance Battery, 20 V Battery, 2 Ah Battery

Genesis Belt Sander, Amp Rating: 8 A, 3 x 21 in Belt, Adjustable Handle, Includes: Dust Bag and Sanding Belt Low-profile design gets into tight spots Variable speed for versatility Adjustable front handle for comfort and control Flat side for flush sanding Single lever...

Genesis Bench Grinder with Light, 120 V, Frequency Rating: 60 Hz, 3550 rpm, Arbor/Spindle Size: 5/8 in, Wheel Diameter: 8 in, Includes: 36G Wheel and 60G Wheel 3/4 hp induction motor for quiet, smooth performance Two flexible gooseneck lights for better illumination Adjustable tool...

Genesis Circular Saw, Tool Only/Battery Included: Battery Included, 20 V, 2 Ah Battery, 5-1/2 in Diameter Blade, Bevel Capacity: 45 deg, 1-9/16 in at 90 deg, 1-1/8 in at 45 deg Cutting Depth, Includes: 18T Carbide Tipped Blade, Rip Guide, Battery, Charger and Blade...

Vulcan Bit Holder and Guide, Steel with Plastic Sleeve, 4-3/4 in Length Magnetic Retractable

Genesis Circular Saw, Amp Rating: 13 A, 7-1/4 in Diameter Blade, 2-7/16 in Cutting Depth, Bevel Capacity: 45 deg, Includes: 24T Carbide-Tipped Blade, Blade Wrench, Rip Guide, 5500 rpm Speed, D-Shaped Handle, 6 ft Cord Length Spindle lock for easy blade changes Powerful 13...

SAW RECIP VARIBLE SPEED 7.5AMP

DRIVER IMPACT LITHIUM-ION 20V

Incredibly versatile tool for home projects, repairs and remodeling. 21,000 opm for fast sanding, grinding, cutting, sawing and scraping. 4-pin flange design holds accessories firmly in place. Includes 3 in delta sanding pad, assorted sandpaper, scraping blade, 30 mm E-cut saw blades, HSS segment...

DRILL/DRVR KIT CMB LT-ION 20V

DRILL/DRIVER LITHIUM-ION 20V

Electronic variable speed. Soft-start for improved operator control. Die-cast aluminum gear housing. Extended rear handle design for balance. Two position auxiliary handle. Lock-on switch for extended use. Spindle lock for quick accessory changes. Converts easily from a sander to a polisher. No load speed...

708 in-lb of torque. Torque transfers to the work, not the user. 1/4 in hex quick-change locking collet. More power and double the run time of Ni-Cd drivers. Battery holds its charge up to 18 months in storage. Built-in LED work light. Metal belt...

1001 household, hobby and project uses are cut, saw, sand, grind, drill, polish, buff, sharpen, clean and more. Variable speed of 8000 to 30,000 rpm. 1/8 in collet accepts all standard rotary tool accessories. Separate On/Off and speed control switches. Spindle lock for quick...

Rubberized palm grip for comfort and control. Powerful 2.2 A motor. 12,000 orbits per minute and random orbit action for fast, swirl-free sanding. Hook-and-loop system for quick and easy paper changes. 5 in pad with standard 8 hole pattern. Through-pad dust collection. Dust-protected On/Off...

Palm grip for comfort and control. Dust protected On/Off switch. Die-cast aluminum base for durability. Spring-loaded paper clamps. 10,000 opm. Includes dust bag and sandpaper assortment. Oversized spring-loaded paper clamps for quick and easy paper changes Flush sanding on three sides Palm-grip for comfort...

Heavy-duty all steel construction, stand supports up to 400 lb. Accommodates all brands of miter saws, including 12 in sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers...

Sliding rail system for crosscutting stock up to 12 in wide. Make precision miter cut up to 45 deg left and right. Make bevel cuts up to 45 deg left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting...

Make precision miter cuts up to 45 deg left and right with 9 stops at commonly used angles. Make bevel cuts up to 45 deg left. Use compound cutting for crown molding, shadow boxes, picture frames and more. Laser-light cutting guide for quicker alignment...

DRILL/DRIVER 12V L-ION 2-SPEED

Replacement battery for Genesis GLCD122P, GLID12B and combo kit GL12DIDK2.

Genesis Jig Saw, Amp Rating: 5 A, Cutting Capacity: 1/4 in Steel, 3-3/16 in Wood, 3/4 in Stroke Length, 0 to 3000 spm Strokes per Minute, Includes: Rip Guide, Wood Cutting Blade, Metal Cutting Blade, Vacuum Adapter, Allen Wrench, T-Shank Blade, Orbital Cutting Action...

Quickly tighten and loosen large nuts, bolts and other fasteners. 1/2 in square drive, 220 ft-lb maximum torque. Die-cast aluminum gear housing for durability. Rocker style switch for one-handed operation. Rated power 120 V, 60 Hz, 7.5 A, no load speed 0 to 2100...

DRILL HAMMER 1/2 INCH

Genesis Electric Drill, Amp Rating: 4.2 A, 3/8 in Chuck, Keyless Chuck, Includes: (4) Drill Bits, (1) Double-Ended Screwdriver Bit, Rubberized Non-Slip Grip Handle, Trigger Control, Gray/Green 3/8 in (10 mm) keyless chuck for quick bit changes Powerful 4.2 A motor for all-purpose drilling...

1/2 hp induction motor for quiet smooth performance. Two flexible gooseneck lights for better illumination. Adjustable tool rests. Eye shields for safety. No load speed of 3550 rpm. Pre-drilled heavy-duty cast iron base. Wheel size of 6 x 4/5 x 1/2 in. 1/2 in...

For aggressive material removal of wood, tile adhesives, cement and mortar. For use with all brands of multi-purpose oscillating tools.

For removing grout from floor or wall tiles for replacement or restoration. Use with all brands of multi-purpose oscillating tools.

Low profile design gets into tight spots. High-density hook-and-loop attachment system holds accessories securely. Ideal for detail sanding jobs utilizing quick attach hook-and-loop sandpaper. For use with all brands of multi-purpose oscillating tools.

12 hook-and-loop sanding triangles including three 60G, three 80G, three 120G and three 240G. For use with most detail sanders and all brands of multi-purpose oscillating tools.

For removing deep penetrating adhesive, caulking, silicone and other soft bonding materials up to 3 in deep. For use with all brands of multi-purpose oscillating tools.

Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools.

For plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 2-1/4 in deep. 5X the durability of regular bi-metal blades. For use with all brands of Multi-Purpose oscillating...

For continuous cutting in wood, drywall, plastic, copper, aluminum, other non-ferrous metals and other soft materials. Use with all brands of multi-purpose oscillating tools.

Bi-metal 1-3/8 in blade for plunge cuts and flush cuts in nails, nail-embedded wood, copper, aluminum, other non-ferrous metals, mild steel, wood, plastic, drywall and other soft materials up to 1-9/16 in deep. For use with all brands of multi-purpose oscillating tools.

15 TPI coarse tooth blade for fast plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 2-1/4 in deep. For use with all brands of Multi-Purpose Oscillating tools.

For plunge cuts and flush cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. Use with all brands of multi-purpose oscillating tools.

Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating...