The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve. Solid brass design meets federal low-lead regulations

Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. This hydrant tee meets federal low lead regulations.

The 1-1/4 in two hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. 1/8 in female tapping for an air valve...

The 1 in two-hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. Vertical or horizontal application prevents back flow to the...

The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back....

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pressure mark (e.g. 50 psi). If the pressure drops rapidly, the switch will automatically shut-off the pump....

Water Source Air Volume Control, Specifications: 3/8 in MPT Connection, Suitable for: 120 gal Water Tank

The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and...

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. 40 psi). This switch is to be used with submersible well pumps or as a replacement switch....

Water Source Flush Pipe Coupling, Nominal Size: 2 in, Slip Connection, Schedule Rating: SCH 40, PVC

Water Source Foot Valve, 1-1/2 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.

Water Source Pressure Switch, 115/230 V, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Steel Body, Gray, 40, 60 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC

Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings The submersible cable guard prevents submersible power cables from rubbing in a well casing, cable guard is constructed of durable plastic material Easy-to-use, snap-in wire guide The cable guard is constructed of...

Eco-Flo Yard Hydrant Repair Kit, Includes: Square Head Set Screw, Packing Nut, Plunger, O-Rings, Connector and Links

The brass insert coupling connects two PVC pipes together. It has 3/4 in insert x 3/4 in insert. Use with clamps.

The 3/4 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

The pressure gauge measures water pressure in the pressure tank. It has a 1/8 in back connection. Dark numbers are easy to read on the gauge. Measures water pressure in well tank

The 10 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and a snifter valve. Solid brass design meets federal low-lead regulations

The 1 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body

Eco-Flo Sump Pump Check Valve, 1-1/2 x 1-1/4 or 1-1/2 in Connection, MPT x Barb or Spigot Connection, Body Material: Plastic Prevents back flow of water into sump pit

The 3/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Water Source Foot Valve, 1 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

Eco-Flo Sump Pump Discharge Hose Kit, 1-1/2 in Dia Outside, 24 ft L, Suitable for: Sump Pumps, Includes: 1-1/4 x 1-1/4 in and 1-1/2 x 1-1/4 in Barbed Adapters, Hose Clamp

The replacement complete head assembly for a blue frost-proof yard hydrant. This piece comes with all moving parts for an easy repair. It can be padlocked to prevent unauthorized use.

The brass insert coupling connects two PVC pipes together. It has 1 in insert x 1 in insert. Use with clamps.

The 1-1/4 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

Water Source Check Valve, 1-1/4 in Nominal, Brass Body, 200 psi Pressure, 180 deg F, Suitable for: Jet, Submersible and Centrifugal Pumps

Water Source Check Valve, 3/4 in Nominal, Media: Gas, Oil, Water, 2-3/4 in Length, 1-1/2 in Width, 1-1/2 in Height, Brass Body, 200 psi Pressure

Eco-Flo Submersible Pump, 1-1/4 in Connection, FNPT Connection, 230 V, 3/4 hp, 12 gpm, Stainless Steel, Silver, Black Stainless steel pump shaft is precision ground for exact bearing fit and straightness Precision molded impellers and diffusers Stainless steel pump housing for maximum protection against...

Water Source Pool Pressure Gauge, Gauge Case Material: Steel, 1/4 in Connection, Measuring Range: 100 psi, Lens Material: Glass The pressure gauge measures water pressure in the pressure tank It has a 1/4 in lower connection Dark numbers are easy to read on the...

The pressure gauge measures water pressure in the pressure tank. It has a 1/4 in lower connection. Dark numbers are easy to read on the gauge.

Water Source Check Valve, 1 in Nominal, NPT Connection, Media: Gas, Oil, Water, 1.9 in Length, 1.7 in Width, 3.2 in Height, Brass Body, 200 psi Pressure

Eco-Flo ECD Submersible Sump Pump, Inlet Connection Size: 2 in, Outlet Connection Size: 1-1/2 in, 115 V, 8 A, Frequency Rating: 60 Hz, 3/4 hp, Maximum Head: 35 ft, Suction Lift: 6000 gph, Cord Size: 8 ft, Temperature Rating: 35 to 104 deg F,...

Eco-Flo Sump Pump, 1/2 hp, 5100 gph, Maximum Lift Head: 26 ft, Outlet Connection Size: 1-1/2 in, 115 V, Cord Length: 8 ft, Impeller Material: Cast Iron, Housing Material: Cast Iron Built-in thermal overload motor protection Vertical switch operates in basins 11 in Dia...

Eco-Flo PUP Drill Pump with Kit, 300 gph, Housing Material: Thermoplastic, Suitable for: 1/4 or 1/2 in Drill, Includes: 3 ft Garden Hose, 1/4 in Hose Corrosion-resistant thermoplastic construction Inlet or outlet clearly marked and designed for use with garden hose

Water Source Pressure Gauge, 3/4 in Connection, Female Connection, Measuring Range: 0 to 100 psi, Dial Size: 2 in, Lens Material: Glass, Socket Material: Brass, Suitable for: 3/4 in Male Hose

The air volume control maintains balance of air volume in galvanized water tanks when using submersible pumps. It replenishes air in galvanized pressure tanks. It is used with submersible pumps.

The 1/8 in air valve provides method of injecting and holding air pressure in galvanized water systems. It is easy to install.

Water Source Foot Valve, 1-1/4 in Connection, 200 psi Pressure, Brass Body, Includes: #8 Perforated Brass Screen Strainer

The 1/4 in air valve provides method of injecting and holding air pressure in galvanized water systems. It is easy to install.

Water Source Piggyback Float Switch, 115 V, Dimensions: 4 in L x 2.6 in W x 2.74 in H, Body Material: Rubber, Black, Suitable for: Pumps Working with 1/2 hp at 120 VAC and 1 hp at 230 VAC, Includes: Cable Tie

The 1/2 in relief valve protects tank systems from pressure build-up. It is recommended for use on all submersible pumps or systems that build more than 75 psi. Solid brass design meets federal low-lead regulations Not for use with water heaters