Harvey® wet set PVC cement is a medium-bodied, very fast setting hot-blue cement formulated for use in wet conditions on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit. For more than 75 years, Harvey® has...

push-fit application valve fits 1/2 in CTS, PEX, CPVC. Red faucet or gray toilet Fewer connections to make an easier installation

Harvey® wet set PVC cement is a medium-bodied, very fast setting hot-blue cement formulated for use in wet conditions on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit. For more than 75 years, Harvey® has...

Specially made for smaller supply lines and ideally suited for laboratory equipment, processing tanks, sterilizers, dairy equipment and similar applications. It is particularly recommended for boiler feed lines to prevent backflow when supply pressure falls below system pressure. Suitable for use on hot or...

1/4 OD tube outlet for 3/8 to 3/4 in OD tubing or iron pipe.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 7/8 in BC fitting rotates fully under pressure, connects to...

Anderson Metals Pipe Nipple, Nominal Size: 1/4 in, MNPT Connection, 870 psi, Operating Temperature: 200 deg F, Brass, 3 in L, Suitable for: Brass, Copper and Iron Pipes

push-fit application valve fits 1/2 in CTS, PEX, CPVC. Red faucet or gray toilet Fewer connections to make an easier installation

Christy's® Red Hot Blue Glue® is a very aggressive, deep blue, medium bodied, very fast setting PVC solvent cement. Christy's® Red Hot Blue Glue® is the industry's high quality blue glue, from the leading producer of high performance solvent cements. Contractor preferred The Original...

Anderson Metals Pipe Elbow, Nominal Size: 1 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

This 1/2 inch high capacity feed water pressure regulator is for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water...

This 1/2 in lead-free vacuum relief valve is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks. This valve automatically allows air to enter into the piping system to prevent vacuum conditions that...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term...

BrassCraft's ProCoat® stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat® is applied to the corrugated stainless steel connector using advanced powder coat...

Christy's® Red Hot Blue Glue® is a very aggressive, deep blue, medium bodied, very fast setting PVC solvent cement. Christy's® Red Hot Blue Glue® is the industry's high quality blue glue, from the leading producer of high performance solvent cements. Contractor preferred The Original...

Smith-Cooper Pipe Cap, Nominal Size: 4 in, Threaded Connection, 300 psi, Malleable Iron, 2.08 in L

Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W

Canplas P-Trap, Nominal Size: 1-1/2 in, Hub Connection, ABS, Black

Anderson Metals Pipe Plug, Nominal Size: 1-1/2 in, IPT Connection, Head Type: Cored Square, 200 psi, Operating Temperature: 150 deg F, Brass, Red

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

COUPLING BRASS CXFIP 3/8X1/4

Simer Heavy-Duty Utility Pump, 120 V, 7.2 A, 3/4 hp, 24 gpm, Inlet Connection Size: 1 in, Outlet Connection Size: 1 in, Maximum Pressure: 80 psi, Cord Length: 6 ft, Stainless Steel

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. No tools required Push-fit connects to copper or plastic Corrosion-free Lead-free Quick disconnection without the need for tools High...

Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Used to attach CSST to both the beginning and end of a run At least two fittings needed per installation No special tools or sealant required Patented...

Canplas P-Trap with Cleanout, Nominal Size: 2 in, Hub Connection, ABS, Black

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick-connect and disconnect Easy to use in confined spaces No tools required Permanent leak-proof connection Plastic...

Canplas P-Trap with Cleanout, Nominal Size: 1-1/2 in, Hub Connection, ABS, Black

Harvey® C-4 CPVC cement is a regular-bodied, fast set orange cement for use on all schedules and classes of CPVC pipe and fittings up to 4 in diameter with interference fit. For more than 75 years, Harvey® has offered a wide variety of products...

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using...

Suitable for use with air and water lines. Use as pneumatic control line. For use with compression style fittings. Non-toxic LDPE compound

General-purpose-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Used for low open-end water drain lines UV- and ozone-resistant for color stabilization Use as flexible drain line

Anderson Metals Pipe Elbow, Nominal Size: 3/8 in, FIP Connection, Angle: 90 deg, 200 psi, Operating Temperature: 150 deg F, Brass, Rough, Suitable for: Brass and Steel Pipes

General-purpose-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Used for low open-end water drain lines UV- and ozone-resistant for color stabilization Use as flexible drain line

Easy quarter-turn On/Off operation regulates water flow from a trickle to wide open. Compact, low lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated...

Canplas Street Pipe Elbow, Nominal Size: 3 in, Spigot x Hub Connection, Angle: 22.5 deg, PVC, White

Great for diverting water from one place to another, water will not seep out until it reaches the end of the pipe. Universal fit, compatible with other brands of pipe and fittings Compact size saves valuable storage space Less parts and tools required ensures...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Quick disconnection without the need for tools High chemical resistance Food quality and suitable for potable...

Apollo PEX tubing is cross linked, high density polyethylene and is available for potable water distribution systems in red, white and blue colors for easy identification of hot, cold and main water lines. Apollo PEX can be used in continuously recirculating plumbing systems up...

Abbott Rubber Air Hose, 1/2 in ID, 3/4 in OD, PVC, Red, 100 ft Length, 70 deg F

IPEX Tee Reducer Socket, Specifications: 1-1/2 x 1 in Size, SCH 40

Canplas Pipe Elbow, Nominal Size: 4 in, Hub Connection, Angle: 22.5 deg, ABS, Black

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp Type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID.

PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to...

Apollo PEX tubing is cross linked, high density polyethylene and is available for potable water distribution systems in red, white and blue colors for easy identification of hot, cold and main water lines. Apollo PEX can be used in continuously recirculating plumbing systems up...

Carriff Corp Soil Separator, Dimensions: 300 ft L X 24 in W Durable lightweight fabric Just unroll fabric and place it in designated spot

Apollo PEX tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture....

Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in...

Exceeds ASTM standards and is made with no-break copolymers for professional-grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30% higher load-bearing rating than standard corrugated pipe. Perforated pipe with sock is ideal for French drain application in...

B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of...

Eastman Gas Dryer Connector and Installation Kit, Includes: (1) 3/8 in ID x 48 in L Thermal Excess Flow Valve, (1) Epoxy-Coated Stainless Steel Gas Connector, (1) 1/2 in OD x 1/2 in MIP Steel Fitting, (1) 1/2 OD x 1/2 in FIP Steel...