GRATE ATRIUM GREEN 12X12IN

Rheem Tankless Water Heater with Wi-Fi, 3/4 in NPT Inlet, LPG Gas, 199,900 Btu/hr BTU, Electronic Ignition, 9.5 gpm Flow Rate, PVC, CPVC, Polypropylene, Polypropylene Vent, Dimensions: 23.7 in H x 17.7 in W x 9.8 in D

PERF DRAIN PIPE CORR 3X10FT

The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems. Measures 2 in Can also be used with plastic...

MS design Series deep well jet pumps feature over the well bolt-on capability with a special casing adapter for 2 and 3 in single pipe installations and adapter flanges for adapting all double pipe installations. Quality construction - precision-machined, close-grained cast iron pump body...

Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gpm. Pressures to 80 psi, suction lifts to 20...

Bushings are used to reduce the size of pipe connecting to a fitting. This one is solvent welded to a fitting socket and used to connect to a smaller MPT fitting.

Charlotte Pipe Cut Pipe, Nominal Size: 1-1/2 in, 2 ft L, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White

Oatey® saddle tee kits are designed to be solvent welded to an existing 3 or 4 in SCH 40 DWV line and secured with metal V-bolt, washers and nuts. Accepts incoming line in side the socket or joins with a SCH 40 DWV fitting...

Canplas P-Trap, 1-1/2 in Nominal, Hub Connection, SCH 40 Schedule, PVC, White

Galvanized back plate for easy mounting to any structure. The cover plate is constructed of 1/4 in ABS. All manifolds are bolted to the back plate rather than screwed. Each manifold consists of two inlet ports that supply the dual chambers. 3/4 in PEX...

Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP. Nickel plated brass nuts Nitrile rubber sealing washer

IPEX Pipe Cap, Nominal Size: 1-1/2 in, Socket Connection, Schedule Rating: SCH 40, PVC

Allows for the universal brass push connection to be disconnected from the pipe quickly and easily. Easy one-handed operation in tight spaces. Compact design with wide grip handles Quick and easy accessory changes, with the patented EZ twist nose cap accessory changes are easy...

Pacer's S series self-priming centrifugal pumps are lightweight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton, EPDM or Buna O-ring,...

The SharkBite PEX barb elbow is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing at a 90 deg angle. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These...

The SharkBite PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a...

The SharkBite PEX barb plug is an easy to install and low cost solution to cap off a PEX tubing line. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in both a...

The SharkBite PEX barb tee is made of a lead-free DZR brass and is an easy-to-install, low-cost solution to connect to PEX tubing. The SharkBite PEX barb fittings are compatible for potable water distribution and hydronic heating applications. These fittings can be used in...

Nibco Pipe Coupling, Nominal Size: 3/4 in, Slip-Joint Connection, CPVC, White, 8 in L, Suitable for: Copper, PVC, CPVC and PEX Pipes

Nibco Pipe Coupling, Nominal Size: 1/2 in, Slip-Joint Connection, CPVC, White, 6 in L, Suitable for: Copper, PVC, CPVC and PEX Pipes

Nibco Pipe Elbow, Nominal Size: 1/2 in, Slip-Joint Connection, Angle: 90 deg, CPVC, White, Suitable for: Copper, CPVC, PVC and PEX Pipes

Nibco Pipe Adapter, Nominal Size: 1/2 in, Slip-Joint x MIP Connection, CPVC, White

Nibco Pipe Cap, Nominal Size: 1/2 in, Slip-Joint Connection, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC, 0.62 in L, Suitable for: Copper, CPVC, PVC and PEX Pipes

Nibco Pipe Tee, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC

Nibco Pipe Tee, Nominal Size: 1/2 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC

Nibco Pipe Cap, Nominal Size: 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC

Simple Spaces Water Cooler, 2-Tap Hot and Cold Water Dispenser. Ideal for home & office. 10-3/4" W x 12" D x 33-1/4" H (27 x 30 x 84 cm). LED light indicators for hot and cold water functions. Compressor cooled water Removable drip tray...

QuakeHold Wrench, Gas Shut-Off, Manual, Steel, Zinc Comes with light reflective tape for easy location at night and a zip tie to hang near gas meter Easy-to-use

Gray fittings used for sprinkler systems where an extension is needed for the sprinkler head to be above ground level. Also may be used to prevent damage to the sprinkler head. Teflon thread tape is recommended for threaded joints. Used for sprinkler systems where...

Bagged.

This 1/2 in hot water extender tempering valve is designed for domestic water supply systems and recommended for tankless heater, water heater and solar applications installed at or near the boiler or hot water heater. It consists of a lead-free brass body, solder connections,...

This ProSource water meter key is used for turning off/on water supply valves. It has a black painted finish with blue dip-coated handle.

Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique...

BrassCraft® 1/2 in Nom compression inlet x 3/8 in OD compression x 3/8 in OD compression dual outlet, dual shut-off multi-turn angle valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room...

For use with SharkBite barb 3/8 in, 1/2 in, 3/4 in and 1 in PEX tubing. The Roto-bit rotating bit cartridge stores bits and provides easy accessibility

Nibco Pipe Tee, Nominal Size: 1 x 3/4 in, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC

Carbon steel reversible jaw.

The lock nut wrench is used for effortless removal and installation of strainer basket lock nuts. The innovative design features one stationary and one pivoting jaw for the ultimate combination of maneuverability and leverage. For sink repair Made of steel with PVC

SharkBite® tees are push-to-connect and are capable of connecting copper, PEX, CPVC or PE-RT tubing in any combination. They are rotatable after assembly which makes for easy installation even in cramped working conditions. Instant push-fit connection for increased ease of use Compact, robust lead-free...

The ProSource 6-in-1 tool is used to join similar tubing without couplings. It fits 3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in and 5/8 in OD tubing. 6-in-1 tool Used to join similar tubing

The ProSource plumbers wrench holds pop-up plugs and basket strainers in position and prevents rotation during installation. Made of iron. Holds pop-up plugs and basket strainers Made of iron

This 4-way steel silcock key wrench has a 1/4 in., 9/32 in., 5/16 in. And 11/32 in. Stem to service most silcocks in common use. It is durable, easy-to use and has an attractive finish. Used to open and close silcocks or spigots. Used...

This plumbers wrench is ideal for removing and installing strainer baskets lock nuts, closet spuds, drain nuts and flush valve nuts. Remove or install strainer baskets lock nuts Made of steel

Anderson Metals Reducing Pipe Coupling, Nominal Size: 1/2 x 1/4 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass

Installs and removes tub drains and closet spuds. Fits most tub drains and 1-1/2 to 2 in closet spuds.

The ProSource tube cutter wheel is the replacement cutter blade for Sku #538-3500. Made of steel Chrome finish

The ProSource shower valve socket wrench set has a nickel-plated steel body. It fits 29/32 in and 31/32 in packing nuts. Steel Nickel finish

Pacer's S series self-priming centrifugal pumps are lightweight and chemically-resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton®, EPDM or Buna O-ring with...

SharkBite® straight stops combine push-fit technology with a straight stop quarter-turn valve. This allows the valve to control water flow to household plumbing fixtures and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions...