For P or S traps.

Outlet connects to 1-1/2 in IPS cast elbow. Supplied with 1-1/2 in and 1-1/4 in polyethylene washers.

For kitchen or lavatory connection to floor. Supplied with 1-1/2 in and 1-1/4 in polyethylene washers.

Plumb Pak Dishwasher Tailpiece, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, White, 8 in L, Suitable for: Hose and Clamp For use with hose or clamp

Plastic body, stainless steel rim. For 3-1/2 in Dia openings.

Plumb Pak Center Outlet and Tailpiece, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, White, Dimensions: 6.13 in W x 12 in H, Suitable for: Drain System

Plumb Pak Master End Outlet and Tailpiece, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, White, Dimensions: 6.13 in W x 12 in H, Suitable for: Drain System

For use with end or center outlet tee. 1 per bag 21.25 in height x 6.13 in width

5/8 in OD Compression x 3/8 in OD. Valve pushes on to PEX, CPVC or copper, double O-ring seal, safety clip, Use for tight spots, a shorter stub out or finished wall/floor.

Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak...

Chrome-plated.

Plumb Pak Straight Stop Supply Valve, 3/8 in Connection, Female Compression Connection, Actuator Type: Quarter-Turn, Media: Water

Plumb Pak Lint Trap with Twist Tie, Aluminum, Dimensions: 7 in W x 10 in H

2 seat and spring assemblies, for single lever spouts. Includes both long and short springs.

For use on plumbing threads to prevent leaking.

Plumb Pak Sink Tailpiece, Nominal Size: 1-1/2 in, PVC, White, 6 in L

Plumb Pak Sink Tailpiece, Nominal Size: 1-1/2 in, PVC, White, 12 in L

Plumb Pak Lever Bath Drain Assembly, Plastic, White, Chrome, Dimensions: 1-1/2 in OD

C to E with baffle tee.

Plumb Pak Slip-Joint Nut, Specifications: 1-1/2 in IPS x 1-1/2 in Tube, PVC, White

Plumb Pak Tailpiece Washer, Beveled, Size: 1-1/2 in, Polyethylene, Includes: 1 Set per Bag

C to C with baffle tee.

For lavatory or kitchen connection to wall. Supplied with 1-1/2 in and 1-1/4 in polyethylene washers.

For lavatory.

Plumb Pak Wall Tube, Nominal Size: 1-1/4 in, Plastic, White, Suitable for: Drainage System

For lavatory.

Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/4 in, Slip-Joint Connection, PVC, White, 6 in L 1 per bag 11 in height x 4.5 in width

Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/4 in, Slip-Joint Connection, PVC, White, 12 in L 1 per bag 17 in height x 4.5 in width

For P or S traps.

Plumb Pak Wall Tube, Nominal Size: 1-1/2 in, Plastic, White, Suitable for: Drainage System

Solvent weld connects to 1-1/2 in Schedule 40 outlet for kitchen or lavatory.

Plumb Pak Slip-Joint Nut, Specifications: 1-1/2 x 1-1/2 in, PVC, White 1 per bag 5.5 in height X 4 in width

Plumb Pak Slip-Joint Nut, Specifications: 1-1/4 in Size, Plastic, White, Suitable for: Plastic Drainage Systems

For kitchen or lavatory. Supplied with 1-1/2 in and 1-1/4 in polywashers. 1-1/2 in outlet connects to 1-1/4 in OD or 1-1/2 in OD tube size.

Contains 1 each 1-1/2 x 1-1/2 in and 1-1/2 x 1-1/4 in. Bagged.

Plumb Pak Faucet Washer, Beveled, 1-1/2 x 1-1/4 in, Slip-Joint Connection, Polyethylene

Plumb Pak Marvel Pipe Connector, Nominal Size: 1-1/2 in, Compression Connection, Schedule Rating: SCH 40, Plastic, White, Suitable for: Drainage System

Plumb Pak Pipe Elbow, Nominal Size: 1/2 in, IPS Connection, Brass, Polished Chrome, Suitable for: Brass Drainage System For adjustable trap, IPS outlet

Fits garden and utility hoses. 4-1/2 in height X 3-1/4 in Width, 6 per bag

Connects to existing valves. Solid chrome-plated brass ball. Brass forged body and solid brass stem. Teflon seats melting point of 621 deg F. Captured nut. Compression connection. 100% pressure leak tested. Carded.

Plumb Pak Sink Tailpiece, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, 12 in L

Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/4 in, Slip-Joint Connection, Plastic, 9 in L 1 per bag 17 in height x 4.5 in width

1-1/2 x 1-1/2 in or 1-1/4 x 1-1/4 in.

For kitchen or lavatory. 1-1/2 x 1-1/2 in, 1-1/2 x 1-1/4 in.

1-1/2 x 1-1/2 in or 1-1/2 x 1-1/4 in adjustable size.

Plumb Pak Faucet Hole Cover, Dimensions: 1-3/4 in L x 1-3/4 in W, Suitable for: Sink and Faucets, Includes: Bolt and Wing Nut

Spray head, 4 ft hose and universal coupling.

Plumb Pak Faucet Hole Cover, Snap-In, Stainless Steel, Dimensions: 1-1/2 in L x 1-1/2 in W, Suitable for: Sink and Faucets

White rubber with plated ring.

Fixed post and stopper.