Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

Used for capping off PEX fittings. Bar coded.

Used for capping off PEX fittings. Bar coded.

Used for capping off PEX fittings. Bar coded.

Used for capping off PEX fittings. Bar coded.

Used for capping off PEX fittings. Bar coded.

Used for inserting a plug into the end of a pipe. Bar coded.

Used for inserting a plug into the end of a pipe. Bar coded.

Used for inserting a plug into the end of a pipe. Bar coded.

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long-term...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

For hot or cold water in-line valve with PEX connections on both ends. Bar coded. This is a directional shut-off valve The arrow on the side needs to point with the flow of water

1/2 in x 3/8 in compression. Connects 1/2 in pex or polybutylene and 3/8 in compression. No special tools required. This is a directional shut-off valve The arrow on the side needs to point with the flow of water For use on flexible supply...

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It PEXLOCK Pipe Elbow, Nominal Size: 1/2 in, FPT Connection, Angle: 90 deg, Suitable for: PEX and Polybutylene Tubing For hot and cold water 1/2 in fits PEX or polybutylene tubing only

For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 in and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

For hot and cold water. 3/8 and 1/2 in fits PEX or polybutylene tubing only. 3/4 in fits PEX tubing only, to use on polybutylene use a PEX to polybutylene transition fitting. Bar coded.

Flair-It PEXLOCK Tube Tee, Nominal Size: 1/2 x 1/8 in, Compression x FPT Connection, 200 psi, Operating Temperature: 180 to 200 deg F, White, PEX-A/PEX-B: PEX-A, PEX-B, Suitable for: PEX and Polybutylene Tubing Used to connect icemaker fittings to PEX or polybutylene tubing

Flair-It fittings are constructed of durable polyoxymethylene (POM) and are compatible with PEX and PB. The patented design consists of a nut and flared insert and requires no tools. The fittings push against the ID and OD of the pipe, creating a strong long...

Cross-link polyethylene tubing rated SDR9 PEX-A B137.5 potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Alternative to copper plumbing pipe because of the lower cost, faster...

BATH FLANGE SHALLOW CHRM 1-1/4

TOILET FLAPPER KOHLER

FLEX COUPLING 1-1/2IN

FLEX COUPLING 1-1/2X1-1/4

FLEX COUPLING 2X1-1/2

FLEX COUPLING 3X1-1/2

J-BEND FLEX 1-1/2OR1-1/4

TOILET LIFT WIRE & ROD 8IN

Good, dependable performance marks this product as the solution for many home de-watering applications. Plastic construction Pumps to 3/16 in depth Switch for automatic operation sold separately For removing unwanted water to 3/16 in depth For the highest corrosion resistance Use where unwanted water...

4 in submersible pumps are the most economical, energy-efficient pumps for 4 in wells or larger. They provide the optimum amount of water and pressure for general home and farm use. For 4 in inside diameter or larger wells 4 in submersible pumps are...

Economical sewage pump system manufactured of durable thermoplastic construction. Ideal for basement installations, pumping below-grade toilets and laundry facilities. Corrosion-resistant construction with multi-vane, non-clog vortex impeller Grommets accept 4 in PVC inlet, 2 in PVC discharge and vent Handles up to 2 in solids...

This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less. Perfect for shallow wells (depth-to-water less than 25 ft) Thermoplastic construction for higher corrosion resistance Comes with pre-wired 30/50 pressure switch Self-priming...

This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less. Perfect for shallow wells (depth-to-water less than 25 ft) Thermoplastic construction for higher corrosion resistance Comes with pre-wired 30/50 pressure switch Self-priming...

Corrosion-resistant shallow well jet/tank system is ideal for compact installations where space is at a premium. Pump comes already mounted on tank. Excellent performance at depths to water of 25 ft or less Pump tank system pre-assembled and ready to install Ready to install...

Cast-iron shallow well jet pumps provide superior performance and high-capacities with more pressure for shallow wells 25 ft or less. Excellent performance at depths to water of 25 ft or less Rugged, heavy-duty cast-iron pump housing Ready to install dual voltage 115/230 V motor...

Great strong performer for homes and cabins. Pulls water from as deep as 70 ft to provide water to your home, cabin, or small sprinkler system. Rugged pump housing, durable cast-iron construction Excellent performance at depths to water of 25 ft or less Heavy-duty...

Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual-voltage motor, 1/2 hp preset at 115V, 3/4 hp preset at 230V. Prewired pressure switch...

Rugged cast iron construction. Superior performance at depths to water of 100 ft or less. 1/2 hp pumps up to7.9 gpm. 3/4 hp pumps up to 11.8 gpm. Heavy-duty dual voltage motor 1/2 hp preset at 115 V, 3/4 hp preset at 230 V....

Corrosion-resistant, self-priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30-sprinkler heads. Superior performance at depths to water of 20 ft or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Self-priming after pump housing is initially...

Corrosion-resistant, self-priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30-sprinkler heads. Superior performance at depths to water of 20 ft or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Self-priming after pump housing is initially...

The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps. Perfect for updating your aging pedestal pump system, this sump pump is engineered for easy installation and replacement of most other brands With a maximum output...

Durable, corrosion-resistant thermoplastic construction with 2 in solids handling makes the FPSE3200A a great candidate for variety of wastewater applications. Durable, corrosion-resistant thermoplastic construction Handles up to 2 in solids virtually clog-free discharge High-efficiency motor with overload protection Tethered float switch, piggyback controls allow...